The Leica Lino L2P5 projects a combination of long clear cross lines and points set at exact plumb or 90 angles. Easy to set-up, just switch on and the self levelling system compensates for up-to 4 allowing you to concentrate on the job in hand. With a simple two button operation you can switch between horizontal, vertical or cross line projection.
The wide 180 aperture projects a long horizontal line which is perfect for levelling long areas or across multiple walls for example when laying out a kitchen work surface.
Pulsing line can be selected to increase the laser range with use of a line detector (Leica Reference LLD2) for long distance or outside operation. This also activates the power saving mode, reducing power consumption by 40%.
The laser unit incorporates a lock function which protects the unit during transport and also allows the unit to project lines at an angle by tilting the unit. You can manually switch off the self-levelling using the lock function. The laser line can then be projected at any angle.
Minor angular misalignments of 4 are compensated automatically. If the angular misalignment is greater, the device does not project any lines or dots.
Horizontal, vertical or cross line modes.
Points at 90.
Pulse function with power-saving mode.
Exact 90 angles.
Range: 15m visible range / 30m with receiver.
Accuracy horizontal: 1.5mm @ 5m.
Accuracy vertical: 0.75mm @ 3m line length.
Protection Class: IP54 Dust and splash protected.
Self-levelling Range: 4 0.5.
Batteries: 4 x AA 1.5V.
Dimensions (HxDxW): 118 x 131 x 76mm.
Tripod Thread: 1/4in.
1x Leica Lino L2P5 Laser
1x Target plate
1x Magnetic multifunction adaptor
4x Alkaline batteries
1x Carrying Pouch
- Additional Information
Condition New SKU PTDLGSLINOL2P5 Weight (Kg) 2.3300 Brand Leica Geosystems Manufacturers Part Number 777069 Retailer Barcode 7640110692639 Package Height (cm) 31 Package Width (cm) 33 Package Length (cm) 13 Bullet 1 No Bullet 2 No Bullet 3 No Bullet 4 No Bullet 5 No Bullet 6 No