The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.
Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch.
Instructions for fitting
The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.
- Additional Information
Condition New SKU PTDTREUNIBASE Weight (Kg) 0.3700 Brand Trend Manufacturers Part Number UNIBASE Retailer Barcode 5027654320082 Package Height (cm) 26.8 Package Width (cm) 21.1 Package Length (cm) 2.8 Bullet 1 N/A Bullet 2 N/A Bullet 3 N/A Bullet 4 N/A Bullet 5 N/A Bullet 6 N/A