Araldite Industrial Rapid Epoxy 2 x 100ml Tubes
(Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly.)
The Araldite Industrial Rapid Epoxy is a quick and very strong two-part adhesive which gives both prompt positioning of parts, up to 4 minutes, with permanent full bond strength in 2 hours.
An excellent general purpose adhesive with an environmentally friendly formulation which should be in every home for a huge variety of repairs or creative projects.
Two big 100ml tubes will give you enough for repeated uses and Araldite Rapid will provide very good results on metal, wood, masonry, ceramics, glass, chipboard, leather, fabric, rubber and most household plastics.
You can use it around the home, garden, workshop or garage as Araldite Rapid resists a wide range of temperatures from minus 30 degrees Centigrade to plus 80 degrees Centigrade, along with oil and chemicals. It is also water-resistant.
For the very best results, follow the full instructions for use and a step-by-step guide on the reverse of the eco-friendly, recyclable pack.
|Manufacturers Part Number||ARL400006|
|Ebay Category ID||131625|
|Package Height (cm)||23.2|
|Package Width (cm)||6.9|
|Package Length (cm)||3.5|
|Bullet 1||Quick and very strong two-part adhesive|
|Bullet 2||Prompt positioning of parts (4 mins)|
|Bullet 3||Permanent full bond strength (3 hours)|
|Bullet 4||Excellent for general purpose use|
|Bullet 5||Water, chemical and oil resistant|