Chainsaws

The Black and Decker PS7525 Corded Pole Saw has a pivoting head that maximises access and ease of cutting in the most difficult to reach places. The integrated auto oil system lubricates the chain, for reduced wear and greater cutting efficiency and the large oil tank has a viewing window to minimise spillages when filling.

The saw can be extended up to 2.7m in length to easily trim hard to reach, overhead branches and has a large cutting capacity, up to 25cm of cutting width. The low kick back chain provides smooth, fast cutting through wet and dry timber and the chain brake system automatically cuts out within 0.15 seconds if the chainsaw kicks back, for added safety.

Specification

Input Power: 800W.
Chain Speed: 11m/s.
Bar Length: 25cm.
Chain Pitch: 3/8in.
Chain Drive Links: 40.
Oil Tank Capacity: 60ml.
Weight: 3.8kg.

PTDB/DPS7525

The Einhell GE-HC 18Li T Power X-Change Cordless Pole Pruner comes with a quality rail and chain from OREGON for optimum cutting performance. With the adjustable carrying strap this cordless pole-mounted pruner can be comfortably carried. An additional holding area provides a secure hold. The chain is automatically lubricated from an oil tank. Complete with a tool for tensioning the saw blade.

It is an efficient tool for the safe and effortless pruning of high branches from ground level where there is no connection to the electric power grid. This tool is equipped with a powerful Lithium Ion interchangeable battery and a 1-hour high-speed battery charger, which together enable long, uninterrupted work sessions. The telescopic handle can be locked at any length from 880mm to 1120mm for exact adjustment to the required working height.

Supplied with 1 x 18V Power-X-Change 3.0Ah Li-ion Battery, Adjustable Carrying Strap and a 18V Charger.

Specification

Cutting Speed: 2.83 m/s.
Cutting Length: 20cm.
Blade Length: 242mm.
Oil Tank Capacity: 20ml.
Length of Telescopic Bar: 880-1120mm.
Max. Run Time: 30 min.
Charging Time: 1 Hour.
Weight: 6.3kg.

PTDEINGEHC18LIK

The Makita EA3201S35B is a petrol driven chainsaw with a 35cm cutting blade and a 32cc environmentally friendly 2-Stroke engine with Catalytic muffler to comply with all current exhaust emission regulations. It has an on/off choke combination switch with automatic half throttle lock, intelligent ignition coil which controls stable idling, increases output power at practical RPM range with engine overrun protection.

The accumulated electric energy charge system allows easier re-starting a rapid start pull force required to start the machine is drastically reduced with spring-assisted recoil starter. It has a tool less tension system for adjustment of saw chain.

The adjustable oil pump and fleece air filter allow for a higher resistance to dust ingress. The touch and stop switch; a light touch on the switch stops the engine, and the switch returns automatically to the start position, eliminating flooding of the carburettor.

Specification

Input Power: 2-Stroke Petrol Engine 32cc 1.0hp.
Chain Speed: 14.5m/sec.
Chain Gauge: 0.050in, Pitch: 3/8in.
Bar Size: 35cm.
Fuel Tank Capacity: 400ml.
Chain Oil Capacity: 280ml.
Weight: 4.1kg.

PTDMAKEA3201S35

The Makita EA3500S35B Petrol Chainsaw has an easy-start function and features the M2M vibration dampening system. It has an environmentally friendly 2-stroke engine with catalytic muffler to comply with well known exhaust emission regulations.

It comes supplied with a universal wrench bar, chain, chain cover, Torx wrench, tool kit, hex wrench and carburetor screwdriver.

Specification

Input Power: 2-Stroke Petrol Engine 32cc 1.7 kW/2.3 PS.
Chain Speed: 14.5m/sec.
Chain Gauge: 0.050in, Pitch: 3/8in.
Bar Size: 35cm.
Fuel Tank Capacity: 400ml.
Chain Oil Capacity: 290ml.
Weight: 4.4kg.

All vibration figures quoted are Tri-axial to EN60745 2006.

Noise Sound Pressure: 101.8 dB(A).
Noise Sound Power: 111.8 dB(A).
Noise K Factor: 2.5 dB(A).

Vibration K Factor: 2 m/sec
Vibration: Right Handle (Rear grip): 5.0m/sec, Left Handle (Front grip): 4.9m/sec.

PTDMAKEA3500S35

The Makita EA3500S40B Petrol Easy Start Chainsaw has an environment-friendly 2-stroke engine with catalytic muffler to comply with well known exhaust emission regulations and has a compact and lightweight body for better handling.

It offers a rapid start with an on-off choke combination switch and automatic half throttle lock. For added safety the chainsaw has a touch and stop switch.

Specification

Input Power: 2-Stroke Petrol Engine 35cc
Horsepower: 2.28 hp
Chain Speed: 14.5m/sec.
Chain Gauge: 0.050in, Pitch: 3/8in
Bar Size: 40cm
Fuel Tank Capacity: 400ml
Chain Oil Capacity: 290ml
Weight: 5.3kg

PTDMAKEA3500S40

The Black and Decker GK 1000 Alligator Powered Lopper is a revolutionary new cutting tool with the cutting performance of a chainsaw but in an easy to use and much less intimidating form.

The patented jaws protect the user from the moving cutting chain, whilst the easy oil facility, powerful motor and lopper style dual switch handles make this product intuitive in use. It has a large cutting capacity that makes light work of small branches up to 4 inch (100mm).

Specification

Input Power: 550W.
Max. Material Thickness: 100mm.
Bar Length: 10cm.
Pitch: 1/4in.
Weight: 3kg.

PTDB/DGK1000

The HiKOKI CS3630DA Cordless Top Handle Chainsaw is fitted with a powerful brushless motor for extended run time. It has a lightweight, compact design with soft grip handles. The secondary handle provides increased control. The oil tank features a back light making it easy to check the oil level. The chain can be tensioned and changed without tools. Fitted with a mechanical kick-back brake for added safety, and a storage hook.

CS3630DA/JLZ: 1 x 18/36V 5.0/2.5Ah Li-ion Battery
CS3630DA/J4Z: Bare Unit, No Battery or Charger

Specification:

Chain Speed: 8.3m/s.
Blade Pitch: 9.52mm
Guide Bar Length: 300mm
Guide Bar Type: Sprocket Nose
Overall Length: 599mm
Weight inc. Battery: 3.6kg

The HiKOKI CS3630DA/JLZ Top Handle Chainsaw is supplied with:

1 x 18/36V 5.0/2.5Ah Li-ion Battery*
1 x UC18YSL3 Charger
1 x Blade Cover
1 x Chain Oil
1 x Wrench

*Multi Volt batteries for high power output similar to mains powered tools. Batteries are compatible with existing Hitachi/HiKOKI 18V tools.

PTDHIKCS3630DAL

The HiKOKI CS3630DA Cordless Top Handle Chainsaw is fitted with a powerful brushless motor for extended run time. It has a lightweight, compact design with soft grip handles. The secondary handle provides increased control. The oil tank features a back light making it easy to check the oil level. The chain can be tensioned and changed without tools. Fitted with a mechanical kick-back brake for added safety, and a storage hook.

CS3630DA/JLZ: 1 x 18/36V 5.0/2.5Ah Li-ion Battery
CS3630DA/J4Z: Bare Unit, No Battery or Charger

Specification:

Chain Speed: 8.3m/s.
Blade Pitch: 9.52mm
Guide Bar Length: 300mm
Guide Bar Type: Sprocket Nose
Overall Length: 599mm
Weight inc. Battery: 3.6kg

PTDGRPHIKCS3630DAL

The Makita DUC353 Brushless Chainsaw is powered by 2 x 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system. The speed is controlled via the variable speed trigger and the motor is constantly monitored for even cutting speeds. It has an adjustment lever for easier tool-less tension adjustment of the saw chain. It also has adjustable, automatic chain lubrication system and an oil capacity display.

The chainsaw is fitted with a large separate-type metal spike bumper. The spikes grip the work-piece firmly to provide more control. For increased user safety there is an electric chain and a kickback brake. The handles of the chainsaw are covered with an ergonomic soft grip for improved handling.

Bare Unit, No Battery or Charger Supplied.

Specification:

Bar Length: 35cm
Chain Speed: 0-20m/s.
Chain: Gauge: 0.043in, Pitch: 3/8in
Oil Tank Capacity: 200ml
Weight: 5.2kg

PTDMAKDUC353Z

The DEWALT DCM575 XR FlexVolt Chainsaw has a high efficiency brushless motor with automatic oiling for reduced maintenance. The tool-free bar fitment and chain tensioning provides fast and easy chain adjustments. Uses a variable speed trigger so there is no pull starting and improved control during cutting.

The extensive over-mould provides extra grip and comfort in prolonged use. Fitted with a 40cm Oregon bar and chain.

DCM575X1: 1 x 18/54V 9.0/3.0Ah Li-ion Battery.
DCM575N: Bare Unit, No Battery or Charger.

Specification

Bar Length: 40cm.
Chain Speed: 15m/s.
Oil Tank Capacity: 110-120ml.
Weight: 5.68kg.

The DEWALT DCM575X1 XR FlexVolt Chainsaw is supplied with:

1 x 18/54V 9.0/3.0Ah Li-ion Battery
1 x 8 Amp Li-ion Charger

DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the worlds first convertible 18/54V batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18V products and offering increased runtime.

PTDDEWDCM575X1

The DEWALT DCM575 XR FlexVolt Chainsaw has a high efficiency brushless motor with automatic oiling for reduced maintenance. The tool-free bar fitment and chain tensioning provides fast and easy chain adjustments. Uses a variable speed trigger so there is no pull starting and improved control during cutting.

The extensive over-mould provides extra grip and comfort in prolonged use. Fitted with a 40cm Oregon bar and chain.

DCM575X1: 1 x 18/54V 9.0/3.0Ah Li-ion Battery.
DCM575N: Bare Unit, No Battery or Charger.

Specification

Bar Length: 40cm.
Chain Speed: 15m/s.
Oil Tank Capacity: 110-120ml.
Weight: 5.68kg.

PTDGRPDEWDCM575X1

The DEWALT DCM565 XR Brushless Chainsaw is fitted with a brushless motor for improved power and run time. It has a lightweight, compact design. Fitted with a variable speed trigger for single-handed activation. The secondary auxiliary handle provides increased balance and control. Fitted with an automatic oiling system for reduced maintenance and a chain brake that stops in less than 1 second for added safety.

Specification:

Chain Speed: 7.68 m/s.
Bar Length: 30cm
Weight: 3.3kg

The DEWALT DCM565P1 XR Brushless Chainsaw is supplied with:

1 x 18V 5.0Ah Li-ion Battery, 1 x Charger and 1 x DT20665 Chainsaw Chain and Bar 30cm.

PTDDEWDCM565P1

The Einhell GH-EC 2040 Electric Chainsaw provides excellent performance and perfect robust machining. It has ergonomic handle positioning and an optimised centre of gravity distribution for reduced fatigue and safe sawing. The chain is easy to tension and to change without the need for tools.

The chainsaw is made from high quality components, including an Oregon bar and chain and metal gearing for a long life. For safety, the chainsaw has kickback protection with a mechanical instant chain brake.

Specification

Input Power: 2,000W.
Chain Speed: 13.5m/s.
Bar Length: 40.6cm.
Cutting Length: 37.5cm.
Oil Tank Volume: 160ml.
Weight 5.45kg.

PTDEINGHEC2040

The Milwaukee M18 FCHS FUEL Chainsaw is fitted with the next generation POWERSTATE brushless motor, Milwaukees most powerful motor utilising higher grade magnets and 175% more copper vs previous motors. FUEL technology allows the saw to maintain speed in tough applications without bogging down, giving it the ability to outperform petrol chainsaws up to 40cc.

With high strength all metal gearing to deliver best in class torque. The variable speed trigger provides complete control over the power curve, giving instantaneous throttle response to reach full speed in under one second. All metal bucking spikes allow the user increased leverage when cutting. The no-spill oil reservoir provides easy access to the tank and is fitted with a clear viewing window.

REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load. Supplied with 1 x 18V REDLITHIUM-ION HIGH OUTPUT 12.0Ah battery pack that provides superior pack construction, electronics and fade-free performance. Delivers the most work per charge rate, more than any other Milwaukee battery pack. It will cut 150 pieces of 100 x 100mm pine on one full charge.

Specification:

Cutting Speed: 12.4 m/s.
Cutting Length: 40cm
Charging Time: 130 min.
Weight: 6.4kg

PTDMILM18FCHS12

The HiKOKI CS3630DA Cordless Top Handle Chainsaw is fitted with a powerful brushless motor for extended run time. It has a lightweight, compact design with soft grip handles. The secondary handle provides increased control. The oil tank features a back light making it easy to check the oil level. The chain can be tensioned and changed without tools. Fitted with a mechanical kick-back brake for added safety, and a storage hook.

CS3630DA/JLZ: 1 x 18/36V 5.0/2.5Ah Li-ion Battery
CS3630DA/J4Z: Bare Unit, No Battery or Charger

Specification:

Chain Speed: 8.3m/s.
Blade Pitch: 9.52mm
Guide Bar Length: 300mm
Guide Bar Type: Sprocket Nose
Overall Length: 599mm
Weight inc. Battery: 3.6kg

The HiKOKI CS3630DA/J4Z Top Handle Chainsaw is supplied as a bare unit. Batteries are NOT included.

PTDHIKCS3630DA4