Loppers - Anvil

The Fiskars PowerGear Anvil Loppers have handles made from FiberComp to make them extremely lightweight and strong with SoftGrip covered handles for increased comfort. The patented PowerGear mechanism makes the cutting 3 times easier compared to standard mechanisms. The upper blade is made from high quality hardened carbon steel ensuring that they can be sharpened and hold an edge for longer. The quality of the blade is further enhanced by a non stick PTFE coating on upper blade to reduce friction and make cutting and cleaning easier.

The Fiskars PowerGear Anvil Loppers L77 are full sized loppers for larger cutting jobs, ideal for cutting tree branches and thicker branches. The anvil blade made from cast aluminium enables easier cutting of hard, dry wood, which is the purpose of anvil loppers.

PTDFSK112580

These Faithfull Anvil Loppers have a non-stick coated cutting blade which resists rust and reduces friction and they are ideal for cutting dead wood. The oval shafts are made of strong moulded carbon steel.

Replacement Blade available.

1 x Faithfull Anvil Loppers 760mm (30in)

PTDFAIANVLOP30

The Fiskars PowerGear Anvil Loppers have handles made from FiberComp to make them extremely lightweight and strong with SoftGrip covered handles for increased comfort. The patented PowerGear mechanism makes the cutting 3 times easier compared to standard mechanisms. The upper blade is made from high quality hardened carbon steel ensuring that they can be sharpened and hold an edge for longer. The quality of the blade is further enhanced by a non stick PTFE coating on upper blade to reduce friction and make cutting and cleaning easier.

The Fiskars PowerGear Anvil Loppers L31 are handy-sized Loppers for a wide variety of smaller cutting jobs. The anvil blade made from FiberComp enables easier cutting of hard, dry wood, which is the purpose of anvil loppers.

PTDFSK112170

These Bulldog Evergreen Lopping Shears use a compound action to allow a much greater pressure to be applied when cutting. The loppers have anvil blades, and the aluminium handles have soft-touch grips for comfort. Lightweight design for less fatigue.

Cutting capacity: 45mm.

PTDBULBD1101RW

Kent and Stowe Telescopic Geared Anvil Loppers are ideal for larger stems or branches that are out of hands reach or too large to cut with secateurs, requiring 2 hands. Its geared mechanism increases the cutting power to give maximum leverage with minimal effort.

Fitted with premium ground carbon steel blades with a smoother clean cut. The lightweight telescopic aluminum handles have 5 locking positions and are fitted with comfort grips.

Specification

Cutting Diameter: 45mm
Length: 630-830mm
Guarantee: 5 years

PTDK/S70100411

The Fiskars PowerGearX Anvil Loppers are ideal for heavy cutting of hard and dry wood up to 50mm in diameter. The unique PowerGear mechanism gives 3x the cutting power, making light work of the toughest challenges.

The blades are made from stainless steel with a friction-reducing PTFE blade coating and an optimal catch due to curved lower blade. The handles have been specially designed for increased comfort, with SoftGrip material and 3D contour moulding.

Specification:

Capacity: 50mm
Length: 800mm

PTDFSK1020189

The Kent & Stowe Telescopic Ratchet Anvil Loppers are ideal for larger stems or branches that are out of normal reach or too large to cut with secateurs, therefore requiring two hands. Allows you to gradually cut through one branch or stem, with minimal effort. Each time you close the handles, the mechanism clicks and holds the baldes in place, permitting you to make up to 4 short cuts; ensuring the easy pruning of thicker branches.

Fitted with long premium ground carbon steel blades for an easy, smooth and clean cut. The lightweight telescopic aluminum handles have 6 locking positions and are fitted with comfort grips.

Specification

Cutting Diameter: 45mm
Length: 690-940mm
Guarantee: 5 years

PTDK/S70100472

These Faithfull Anvil Loppers have a non-stick coated cutting blade which resists rust and reduces friction and they are ideal for cutting dead wood. The oval shafts are made of strong moulded carbon steel.

Replacement Blade available.

PTDGRPFAIANVLOP30

The Fiskars PowerGear Anvil Loppers have handles made from FiberComp to make them extremely lightweight and strong with SoftGrip covered handles for increased comfort. The patented PowerGear mechanism makes the cutting 3 times easier compared to standard mechanisms. The upper blade is made from high quality hardened carbon steel ensuring that they can be sharpened and hold an edge for longer. The quality of the blade is further enhanced by a non stick PTFE coating on upper blade to reduce friction and make cutting and cleaning easier.

PTDGRPFSK112170