Hall Bradrad Tools Range
(Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly.)
The Hall Bradrad precision tools drill and deburr in material thicknesses up to 10mm. Designed for industrial applications, each step produces accurate, parallel holes with a small clearance on the nominal diameter. It positively deburrs the entry side as the hole is drilled, and if the work can be reversed, both sides.
S Type Bradrad drills are used to machine a wide variety of materials and for many different applications. No pilot drill is required, and good quality deburred holes are produced with minimum fuss using a bench drill or light pedestal drilling machine.
Each Bradrad has eleven different drilling diameters.
When drilling metals always use a coolant.
|Manufacturers Part Number||BSM2|
|Package Height (cm)||18|
|Package Width (cm)||10|
|Package Length (cm)||5|
|Bullet 1||Drill and deburr in material up to 10mm thick.|
|Bullet 2||No pilot drill is required.|
|Bullet 3||Each Bradrad has eleven different drilling diameters.|
|Bullet 4||Drill Sizes: 6 9 12 15 18 21 24 27 30 33 36mm.|
|Bullet 5||Supplied with a 3/8in (10mm) Diameter Shank.|