Woodwork Bench Vices

IRWIN Record V150B Woodcraft Vice is lighter in construction than the standard woodworking vices. This useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High-quality cast body fitted with carefully aligned steel slide bars and main screw.

Specification

Jaw Width: 150mm (6in).
Jaw Opening: 115mm (4.1/2in).

PTDRECV150B

Record quick-release woodworking vices are fitted with quick release mechanisms, simple squeeze the trigger and a quick-release vice will be opened and closed without using the mainscrew.

Large and small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room.

For clamping and holding wood work pieces.

The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool.

Two steel guide rods to reduce wear and ensure a smooth parallel action Jaws toe in so that when pressure is applied they give an even clamping over the whole depth of the work piece.

Adjustable dog used in conjunction with bench stops fitted into the bench top.

Location holes are provided so you can fit your own choice of wooden cheeks to protect the work piece

Jaw Width. 270mm (10 1/2in).

Jaw opening: 380mm (15in)

PTDREC53ED

Woodworking vice for the professional user who requires a plain screw action.
The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism.

Fitted with front dog.

Jaw Width: 230mm (9in).

Jaw opening: 330mm (13in)

PTDREC5212PD

The Faithfull useful lightweight vice for the home handyman, yet robust enough for the more serious woodworker. The body and sliding jaws are equipped for the attachment of wooden jaws to protect the workpiece and the vice. Fitted with a integral clamp for portability

Jaw Width: 150mm (6in)
Opening: 115mm (4.1/2in)

PTDFAIV34

Record quick-release woodworking vices are fitted with quick release mechanisms, simple squeeze the trigger and a quick-release vice will be opened and closed without using the mainscrew.

Large and small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room.

For clamping and holding wood work pieces.

The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool.

Two steel guide rods to reduce wear and ensure a smooth parallel action Jaws toe in so that when pressure is applied they give an even clamping over the whole depth of the work piece.

Adjustable dog used in conjunction with bench stops fitted into the bench top.

Location holes are provided so you can fit your own choice of wooden cheeks to protect the work piece

PTDGRPREC52ED

Woodworking vice for the professional user who requires a plain screw action.
The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism.

Fitted with front dog.

PTDGRPREC52PD

Faithfull Workbench Vice, ideal for the home handyman and the more serious woodworker. Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The main screws Acme thread provides a rapid jaw action and features a toe in function to ensure an even pressure is applied when a work piece is clamped. Wooden jaws may also be fitted to protect the work piece and the vice.

The vice is finished in an attractive blue enamel coating with a chrome plated main screw and handle to provide better corrosion resistance.

The Faithfull VW150B Workbench Vice has the following specification:

Jaw Width: 150mm (6in)
Clamping Capacity: 145mm (5.3/4in)
Throat Depth: 60mm (2in)
Tommy Bar Length: 125mm (5in)
Weight: 2.27Kg (5lbs)

PTDFAIVW150B

Faithfull Workbench Vice, ideal for the home handyman and the more serious woodworker. Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The main screws Acme thread provides a rapid jaw action and features a toe in function to ensure an even pressure is applied when a work piece is clamped. Wooden jaws may also be fitted to protect the work piece and the vice.

The vice is finished in an attractive blue enamel coating with a chrome plated main screw and handle to provide better corrosion resistance.

The Faithfull VW150B Workbench Vice has the following specification:

Jaw Width: 175mm (7in)
Clamping Capacity: 185mm (7.1/4in)
Throat Depth: 65mm (2.1/2in)
Tommy Bar Length: 150mm (6in)
Weight: 3.157Kg (7lbs)

PTDFAIVW175B

This Faithfull Woodworking Vice is manufactured from close grain grey cast iron with a steel mainscrew for a long and trouble-free working life. The accurately machined housing coupled with solid steel guide rods assure a smooth sliding true parallel action for the jaw, free from side or cross deflection.

A quick-release lever allows the user to open the vice jaws to the required width without the need to wind the main screw handle, allowing much faster adjustment.

This vice has a toe-in feature so that when fully closed the jaws only meet at the top to provide even clamping on the whole depth of the workpiece. Wooden jaws may also be fitted to protect the workpiece and the vice. The adjustable front stop or dog gives an additional clamping facility when used in conjunction with a bench stop.

FAIVW175DQ: Opening: 200mm (8in).
FAIVW230DQ: Opening: 330mm (13in).

PTDGRPFAIVW175DQ

Faithfull Workbench Vice, ideal for the home handyman and the more serious woodworker. Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The main screws Acme thread provides a rapid jaw action and features a toe in function to ensure an even pressure is applied when a work piece is clamped. Wooden jaws may also be fitted to protect the work piece and the vice.

The vice is finished in an attractive blue enamel coating with a chrome plated main screw and handle to provide better corrosion resistance.

PTDGRPFAIVW150B

This Faithfull Woodworking Vice is manufactured from close grain grey cast iron with a steel mainscrew for a long and trouble-free working life. The accurately machined housing coupled with solid steel guide rods assure a smooth sliding true parallel action for the jaw, free from side or cross deflection.

A quick-release lever allows the user to open the vice jaws to the required width without the need to wind the main screw handle, allowing much faster adjustment.

This vice has a toe-in feature so that when fully closed the jaws only meet at the top to provide even clamping on the whole depth of the workpiece. Wooden jaws may also be fitted to protect the workpiece and the vice. The adjustable front stop or dog gives an additional clamping facility when used in conjunction with a bench stop.

FAIVW175DQ: Opening: 200mm (8in).
FAIVW230DQ: Opening: 330mm (13in).

This Faithfull Woodwork Vice Quick-Release with Dog has the following specification:

Jaw Width: 175mm (7in).
Opening: 200mm (8in).

PTDFAIVW175DQ

Woodworking vice for the professional user who requires a plain screw action.
The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism.

Fitted with front dog.

Jaw Width. 270mm (10 1/2in).

Jaw opening: 380mm (15in)

PTDREC53PD

Record quick-release woodworking vices are fitted with quick release mechanisms, simple squeeze the trigger and a quick-release vice will be opened and closed without using the mainscrew.

Large and small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room.

For clamping and holding wood work pieces.

The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool.

Two steel guide rods to reduce wear and ensure a smooth parallel action Jaws toe in so that when pressure is applied they give an even clamping over the whole depth of the work piece.

Adjustable dog used in conjunction with bench stops fitted into the bench top.

Location holes are provided so you can fit your own choice of wooden cheeks to protect the work piece

Jaw Width. 175mm (7in).

Jaw opening: 200mm (8in)

PTDREC52ED

Woodworking vice for the professional user who requires a plain screw action.
The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism.

Fitted with front dog.

Jaw Width. 175mm (7in).

Jaw opening: 200mm (8in)

PTDREC52PD

Record quick-release woodworking vices are fitted with quick release mechanisms, simple squeeze the trigger and a quick-release vice will be opened and closed without using the mainscrew.

Large and small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room.

For clamping and holding wood work pieces.

The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool.

Two steel guide rods to reduce wear and ensure a smooth parallel action Jaws toe in so that when pressure is applied they give an even clamping over the whole depth of the work piece.

Adjustable dog used in conjunction with bench stops fitted into the bench top.

Location holes are provided so you can fit your own choice of wooden cheeks to protect the work piece

Jaw Width. 230mm (9in).
Jaw opening: 330mm (13in)

PTDREC5212ED