Bolsters Cold Chisels & Scutch Chisels

The Footprint Brick Bolsters are fully drop forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses.

The bolsters provide extra strength because the handle, blade and head are drop forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long lasting edge.

The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high quality hand guard for added safety.

Made in the UK.
Manufactured to BS3066.

Size: 75mm (3in).

PTDFOO12373

Electricians chisel made from drop-forged steel, heat-treated and tempered. It has a black powder coated finish.

PTDGRPROU31990

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability.

The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer.

Made in Sheffield, Britain.

Blade Width: 16mm.
Chisel Length: 265mm.

The Footprint 1861 Grooved Plugging Chisel is supplied with a British made high visibility, high quality protective plastic moulded grip.

PTDFOO1861

The Roughneck 3 piece punch and chisel set contains three popular items, each with a colour coded grip for easy identification.

The set contains:
Red Pin Punch 3mm (1/8in).
Black Centre Punch 3mm (1/8in).
Yellow Cold Chisel 10mm (3/8in).

PTDROU31176

These Faithfull chisels are suited to cutting bricks during building work.
This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.

PTDGRPFAIBB3

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges.

For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60.

Manufactured to BS 3066.

PTDGRPFAI414

The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge.

NOT TO BE USED FOR CUTTING BRICKS

PTDGRPFAIEC214

The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge.

NOT TO BE USED FOR CUTTING BRICKS

The Faithfull FAIEC214 Flooring chisel has the following dimensions:
Size: 230 x 57mm (9 x 2.1/4 inch).

PTDFAIEC214

The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge.

NOT TO BE USED FOR CUTTING BRICKS

The Faithfull FAIEC214PG Flooring chisel is fitted with a sturdy rubber safety grip and has the following dimensions:
Size: 230 x 57mm (9 x 2.1/4 inch).

NOT TO BE USED FOR CUTTING BRICKS

PTDFAIEC214PG

The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.
The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.
Size: 230 x 5mm (9 x 3/16in).

PTDFAIFPC

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

PTDGRPFAISCH1

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

Size: 200 x 25mm (8 x 1 in).

PTDFAISCH1

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.

Size: 200 x 38mm (8 x 1 1/2 in)

PTDFAISCH112

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.

Size: 150 x 13mm (6 x 1/2 in).

PTDSTA418287

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.

Size: 175 x 19mm (6 7/8 x 3/4 in).

PTDSTA418289