Punches

Rugged steel centre punch has a mechanism which automatically strikes a blow when downward pressure is applied. Force of blow is regulated by the adjustable knurled cap. No hammer is required.

Punch length: 125mm (5 in).
Punch diameter: 14mm (9/16 in).

Spare points also available STR18APOINT

PTDSTR18A

The Stanley DynaGrip Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification.

Used for driving finish nails beneath trim work.

Tip Size: 1/32in
Length: 5in
Colour. Yellow Sleeve

PTDSTA058911

The Stanley DynaGrip Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification.

Used for driving finish nails beneath trim work.

Tip Size: 1/16in
Length: 5in
Colour: Grey Sleeve

PTDSTA058912

The Stanley DynaGrip Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification.

Used for driving finish nails beneath trim work.

Tip Size: 2.4mm
Length: 5in
Colour: Red Sleeve

PTDSTA058913

The Stanley DynaGrip Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification.

Used for driving finish nails beneath trim work.

This set of 3 punches contains the following tip sizes:
1/32in (0.8mm) Yellow Sleeve
1/16in (1.6mm) Grey Sleeve
3/32in (2.4mm) Red Sleeve

Overall Length: 125 mm / 5in

PTDSTA058930

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.

Designed for heavy-duty use and made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.

Set of 8 includes: 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm.

Pin length: 90mm (3.1/2in).
Overall length: 200mm (8in).

PTDGRPFAIPP332RHL

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.

Designed for heavy-duty use and made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.

Set of 8 includes: 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm.

Pin length: 90mm (3.1/2in).
Overall length: 200mm (8in).

Size: 3.2mm (1/8 in)

PTDFAIPP18RHL

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.

Designed for heavy-duty use and made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.

Set of 8 includes: 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm.

Pin length: 90mm (3.1/2in).
Overall length: 200mm (8in).

Size: 4.0mm (5/32 in)

PTDFAIPP532RHL

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.

Designed for heavy-duty use and made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.

Set of 8 includes: 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm.

Pin length: 90mm (3.1/2in).
Overall length: 200mm (8in).

Size: 4.8mm (3/16in)

PTDFAIPP316RHL

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery.

Designed for heavy-duty use and made from uniformly heat treated tool steel with a round head and a knurled body for a firm grip.

Set of 8 includes: 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm.

Pin length: 90mm (3.1/2in).
Overall length: 200mm (8in).

Size: Set 8 1.5, 2.5, 3, 4, 5, 6, 8 and 10 mm

PTDFAIPPSET8RHL

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.

PTDGRPFAIPP116RH

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.

Tip Diameter: 1.5mm (1/16in).
Length: 100mm (4in).

PTDFAIPP116RH

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.

Tip Diameter: 2.5mm (3/32in).
Length: 100mm (4in).

PTDFAIPP332RH

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.

Tip Diameter: 3mm (1/8in).
Length: 100mm (4in).

PTDFAIPP18RH

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.

Tip Diameter: 4mm (5/32in).
Length: 100mm (4in).

PTDFAIPP532RH