71 items

Sheet Metal Punches

Sheet Metal Punches
View as Grid List

71 items

Set Ascending Direction Set Descending Direction
  1. QMax Thrust Race Complete with Bolt 10mm

    SKU: PTDQMATRACE10

    £3.53

    Q.Max Thrust Races are recommended to increase punch life and to significantly ease the operation of the punch. Makes cutting the holes effortless.

    This 10mm Thrust Race is suitable for 19-31mm punches.

    PTDQMATRACE10

    Learn More
  2. QMax Thrust Race Complete with Bolt 12mm

    SKU: PTDQMATRACE12

    £4.22

    Q.Max Thrust Races are recommended to increase punch life and to significantly ease the operation of the punch. Makes cutting the holes effortless.

    This 12mm Thrust Race is suitable for 32.5-51mm punches.

    PTDQMATRACE12

    Learn More
  3. QMax Thrust Race Complete with Bolt 16mm

    SKU: PTDQMATRACE16

    £4.93

    Q.Max Thrust Races are recommended to increase punch life and to significantly ease the operation of the punch. Makes cutting the holes effortless.

    This 16mm Thrust Race is suitable for 52-80mm punches.

    PTDQMATRACE16

    Learn More
  4. QMax Square Sheet Metal Punch 3/4in

    SKU: PTDQMASQ34

    £66.83

    A quick and easy way to cut clean square holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without spanner, which should be ordered separately.

    Size.3/4in Square.
    Spanner Operated. 5/8in AF.

    PTDQMASQ34

    Learn More
  5. QMax Square Sheet Metal Punch 1in

    SKU: PTDQMASQ1

    £69.97

    A quick and easy way to cut clean square holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    Size.1in. Square.
    Key Type. B Key Operated. 5/16in AF

    PTDQMASQ1

    Learn More
  6. QMax Sheet Metal Punch 1.1/16in

    SKU: PTDQMA1716

    £11.33

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1.1/16 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA1716

    Learn More
  7. QMax Sheet Metal Punch 1 1/8in

    SKU: PTDQMA118

    £11.60

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size.1 1/8in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA118

    Learn More
  8. QMax Sheet Metal Punch 1.3/16in

    SKU: PTDQMA1916

    £12.20

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size.1 3/16in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA1916

    Learn More
  9. QMax Sheet Metal Punch 1.1/4in

    SKU: PTDQMA114

    £12.61

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 1/4 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA114

    Learn More
  10. QMax Sheet Metal Punch 1.3/8in

    SKU: PTDQMA138

    £14.08

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 3/8 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA138

    Learn More
  11. QMax Sheet Metal Punch 1.1/2in

    SKU: PTDQMA112

    £16.32

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 1/2 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA112

    Learn More
  12. QMax Sheet Metal Punch 1.5/8in

    SKU: PTDQMA158

    £18.61

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 5/8 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA158

    Learn More
  13. QMax Sheet Metal Punch 1.3/4in

    SKU: PTDQMA134

    £19.67

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 3/4 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA134

    Learn More
  14. QMax Sheet Metal Punch 3/4in

    SKU: PTDQMA34

    £9.65

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 3/4 in.
    Key Type. 7/32 in hexagonal wrench

    PTDQMA34

    Learn More
  15. QMax Sheet Metal Punch 13/16in

    SKU: PTDQMA1316

    £9.65

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 13/16 in.
    Key Type. 7/32 in hexagonal wrench

    PTDQMA1316

    Learn More
No more product
Sheet Metal Punches
© 2021 Power Tools Direct Online Ltd
VAT Number: 100 5143 84