Wood & Horse Rasps

A rectangular shaped, tanged horse rasp, single cut on both edges with fine rasp teeth on one face and the special Magicut file teeth on the other.

Cuts much faster than conventional horse rasps.

Length is approximately 350mm (14in).
Tanged.

PTDNICMHR14

Half-Round rasp for use on wood or soft materials.
Coarse bastard teeth with single cut edges.
Length 300mm (12in)
Tanged

PTDNICWR12

A rectangular shaped rasp, single cut on the edges with rasp teeth on one side and file teeth on the other.
Ideal for hot rasping.

Length excluding the tang is approximately 350mm (14in).

PTDNICTHR14

The Faithfull flat wood rasp is for use on wood or soft metals, for professional or frequent DIY use. This range of rasps has coarse bastard teeth with single cut edges and is fitted with a comfortable handle.

PTDGRPFAIPPWR8

Plain Horse Rasps are double ended with rasp teeth on one side and file teeth on the other.

The edges are single cut.

Overall length: 350mm (14in).

PTDNICRHR14

Used by cabinet makers and woodworkers. Single cut on edges. Half-Round with the curved side having a larger radius than wood rasp.

Length 250mm (10in).

Half-Round Regular Cut Tanged.

PTDNICCR10

The Faithfull cabinet rasps are ideally suited for use by cabinet makers and woodworkers. They have a larger radius and wider blade than wood rasps. Fitted with a comfortable handle, they are ideal for professional and frequent DIY use.

Specifications:
Shape: Half-Round.
Blade Length: 250mm (10in).
Blade Width: 25mm.

PTDFAIFICR10

The Faithfull flat wood rasp is for use on wood or soft metals, for professional or frequent DIY use. This range of rasps has coarse bastard teeth with single cut edges and is fitted with a comfortable handle.

The FAIFIWR12 Handled Flat Wood Rasp comes in the following:
Type: Wood Rasp
Shape: Flat
Blade Length: 300mm (12 inch)
Blade Width: 27mm

PTDFAIFIWR12

The Faithfull flat wood rasp is for use on wood or soft metals, for professional or frequent DIY use. This range of rasps has coarse bastard teeth with single cut edges and is fitted with a comfortable handle.

The FAIFIWR8 Handled Flat Wood Rasp comes in the following:
Shape: Flat
Blade Length: 200mm (8 inch)
Blade Width: 20mm

PTDFAIFIWR8

Used for working in wood, plastic, plywood, wallboard and other soft materials with edges and surfaces tapered towards point.

Coarse cut. Half-Round.
Length: 200mm (8in).
Tanged.

PTDBAHHRR8

Bahco Cabinet Rasp with an ERGO handle for use in wood, plywood, wallboard, plastics and other soft materials. Edges and surfaces tapered towards the point.

Size: 200mm (8in).

PTDBAH34282H

Bahco Second Cut Cabinet Rasp for work on plywood, wallboard, plastics and other soft materials. The comfortable ERGO handle gives good grip and control.

PTDBAH34382H

Bahco Second Cut Round Rasp for work on plywood, wallboard, plastics and other soft materials. The comfortable ERGO handle gives good grip and control.

Size: 200mm (8in).

PTDBAH34582H

The Roughneck Half-Round Wood Rasp is made from high carbon steel and has an ergonomic soft-grip handle for comfort.
The rasp is double cut on both sides and single cut on both edges.

Blade length: 200mm (8 inch).

PTDROU30388

A general purpose file suited to agricultural use that is
self handled and flat with parallel sides.
The teeth are single cut and the file has two safe edges and a hanging hole in the handle.
Length (excluding handle): 200mm. (8in).

PTDNICFO8