Hexagon Keys

This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened chrome vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places.

Supplied in an ergonomic double layer, open out storage caddy which allows easy access to the smaller keys. Each key has a dedicated and clearly marked space for easy identification and is safely stored and ready for use.

Metric Sizes: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10mm

PTDFAIHKS13ML

Faithfull Long series Lshaped, double ended Star (Torx compatible) keys. Torx screws are now commonly found on automobiles, motorcycles, bicycle brake systems (disc brakes), hard disk drives, computer systems and consumer electronics.

The set is supplied in an ergonomic double lay, open out storage caddy which allows easy access to the smaller keys.

Sizes: TX7, TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45, TX50 and TX55.

PTDFAITKS13L

Teng Tools 9 Piece Hexagon Key Set with ball point head on the long end which permits turning at 30 angle. Made from chrome vanadium steel with a black finish. Supplied in a folding plastic holder.

Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 10mm.

PTDTEN1479MMA

This Teng Tools 9 piece set of hexagon keys is supplied in a handy folding plastic holder for easy storage. The keys are made from chrome vanadium steel for strength and durability. They have a long arm which allows access to more difficult to reach places, and a short arm which ensures excellent torque and leverage.

Colour: black.

The Teng Tools TEN1479MMR Hex Key Set comprises the following key sizes:
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.

PTDTEN1479MMR

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510503 T Handle Hex Driver has the following specification:
Size: 3.0mm.
Short arm length: 12mm.
Long arm length: 100mm.

PTDTEN510503

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510504 T Handle Hex Driver has the following specification:
Size: 4.0mm.
Short arm length: 12mm.
Long arm length: 100mm.

PTDTEN510504

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510505 T Handle Hex Driver has the following specification:
Size: 5.0mm.
Short arm length: 15mm.
Long arm length: 150mm.

PTDTEN510505

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510506 T Handle Hex Driver has the following specification:
Size: 6.0mm.
Short arm length: 15mm.
Long arm length: 150mm.

PTDTEN510506

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510507 T Handle Hex Driver has the following specification:
Size: 7.0mm.
Short arm length: 15mm.
Long arm length: 150mm.

PTDTEN510507

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510508 T Handle Hex Driver has the following specification:
Size: 8.0mm.
Short arm length: 18mm.
Long arm length: 190mm.

PTDTEN510508

This Faithfull Folding Hexagon Key Set contains a selection of short arm, ball end keys in a soft-grip non-slip storage case. Professional quality keys made from fully hardened chrome vanadium steel. All keys from 4mm have chamfered edges to prevent damage to the blade and fittings. Designed to avoid the inconvenience of lost keys.

Metric Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8mm

PTDFAIHKSF8M

These sets come in compact plastic holders that firmly retain each key in size marked holes, with a unique friction ring design.

Key holders are colour coded.
Red for Imperial.
Blue for Metric Sizes.

PTDGRPEKL10107

These Hex-L Key Sets are manufactured with a black oxide finish.
The ball end key allows more flexibility when using hex keys in confined spaces and will turn through 360 up to 25 from vertical.

PTDGRPEKL13607

Each set of metric keys is housed in a one piece comfort grip handle which is designed to operate smoothly, as well as hold the keys firmly in any desired work position.

PTDGRPEKL20811

Two models are available to cover a wide range of applications:
.
Keys are made from hardened and tempered 8650 chrome nickel alloy and finished to resist rust.

PTDGRPEKL22571