Hand Tools

This Bulldog Floor Scraper has a flexible blade made from hardened spring steel, and tubular steel handle. It is perfect for cleaning the floors of barns, garages and patios, and will clear debris and rubbish with ease. It is ideal for removing oil or compacted material, such as mud.

Blades can be replaced.

The BUL1190 Premier Floor Scraper has the following specifications:
Handle length: 1220mm (48in)
Head width: 203mm (8in)
Blade part number: 1911

PTDBUL1190

This manure fork is lightweight, strong and well balanced. It has 4 sharp prongs and a 48in long wooden handle.

PTDBUL1711

West Country round mouthed open socket shovel from Bulldogs Premier range. It has its origin in specific areas where long ash shafts are preferred because of the extra leverage they generate. The timber used for the handle and shaft has a very low moisture content to avoid shrinkage or splitting. The open socket blade is hardened and tempered, so it can be used for light digging as well as for moving loose materials such as shingle, sand and gravel.

Blade: 290 x 265mm (11.1/2 x 10.1/2in).
Handle: 137cm (54in).

PTDBUL2309

Ash Handle with Plastic D Grip. Is an ideal tool for shoveling out or backfilling trenches, concrete mixing, working tarmac and moving cement chippings etc. With an unvarnished hardwood shaft for strength and durability.

The Standard Contractor range is designed with the usual Bulldog attention to detail but aimed at the budget-conscious contractor.

Size: No.2.
Blade: 315 x 250mm.

PTDBUL2SM2PD

Bulldogs Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This cable laying shovel is forged from one piece of steel to give maximum strength. It has an all-metal construction, and a YD grip with a wooden cross dowel for added comfort.

The narrow blade desing allows this tool to dig cable trenches without taking too much material. Its slightly dished blade and rounded cutting edges make it ideal for digging narrow trenches in clay and similar materials.

Blade: 280 x 125mm (11 x 5in).
Handle length: 711mm (28in).

PTDBUL5CLAM

Bulldogs Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This cable laying shovel is forged from one piece of steel to give maximum strength. It has an unvarnished hardwood shaft, which is strong and durable and metal YD grip with a wooden cross dowel for added comfort.

The slightly dished blade and rounded cutting edges make it ideal for digging narrow trenches in clay and similar materials.

The BUL5CLMYD has the following specifications:
Head size dimensions: 280 x 114mm (11 x 4.1/2in)
Handle length: 711mm (28in).

PTDBUL5CLMYD

This solid forged Newcastle draining shovel is ideal for digging holes, deep narrow trenches, cable, pipe and drain channels or post holes. It has a solid forged blade, steel shaft and metal YD hilt with wooden cross piece for added comfort.

Blade: 400 x 180mm (16 x 7in).

PTDBUL5NDAM

This Bulldog draining tool has a solid forged mangangese steel head and socket, which offers great strength and resilience. It has a solid fibreglass shaft and a rubber collar to protect and insulate hands. It is an ideal tool for digging deep narrow holes, trenches, cable channels, pipe channels, drain channels or post holes.

Each tool is tested to 10,000 volts and guaranteed to 1,000 volts.

The BUL5NDIN insulated Newcastle drainer has the following specifications:
Head size: 405 x 178mm (16 x 7in)
Handle length: 711mm (28in)

PTDBUL5NDIN

A heavy-duty, All-steel Square Mouth Contractors Shovel. Solid forged blade and socket correctly tempered for strength. It has a metal YD handle with wooden cross piece.

Size: No.2.
Blade: 310 x 250mm (12 x 10in).

PTDBUL5SM2AM

A solid forged, 4 prong all steel trenching fork. Ideal for breaking up uncultivated ground, digging trenches and hardcore. It has a steel shaft and metal YD grip wirh wooden cross piece for added comfort.

Blade: 310 x 210mm (12 x 8.1/4in).

PTDBUL5TFAM

This Insulated Trench Fork from Bulldogs Premier range has solid forged managanese steel head and socket. It has a 711mm solid fibreglass shaft and a rubber collar to protect and insulate your hand. It is the ideal tool for breaking up hard and compacted lumps and hard ground. Each tool is tested to 10,000 volts and guaranteed to 1,000 volts.

Features:
Insulated Wear Collar.
Tested to 10,000 Volts.
Guaranteed to 1,000 Volts.
Individually Certificated.
Forged in Britain.
Size of head: 310 x 210mm (12.1/4in x 8.1/4in).
Handle length: 711mm (28in).

PTDBUL5TFIN

A heavy-duty all steel taper mouth contractors shovel. Solid forged blade and socket correctly tempered for strength. It has a metal YD handle with wooden cross dowel.

Size: No.2.
Blade: 310 x 250mm (12 x 10in).

PTDBUL5TM2AM

This Bulldog taper mouth shovel has a solid forged manganese steel head and socket, which offers great strength and resilience. It has a solid fibreglass shaft with a YD grip handle, and a rubber collar to protect and insulate hands. It is the ideal tool for digging holes and trenches in compacted and hard ground.

Each tool is tested to 10,000 volts and guaranteed to 1,000 volts.

The BUL5M2IN taper mouth shovel has the following specifications:
Head size number: 2
Head dimensions: 315 x 250mm (12.1/2 x 250mm)
Length of handle: 711mm (28in).

PTDBUL5TM2IN

A solid forged, taper mouth shovel that is ideal for trench work, concrete mixing and general shovelling. It has an unvarnished hardwood handle with a metal YD hilt with a wooden cross dowel for added comfort.

Size: No.2.
Blade: 310 x 250mm (12 x 10in).

PTDBUL5TM2MYD

A heavy-duty, all-steel solid forged trenching shovel which is ideal for digging narrow trenches when laying cables or pipes. It has a metal YD handle with a wooden cross dowel for comfort.

Size: No.2.
Blade: 190 x 280mm

PTDBUL5TSAM