Hand Tools

Hultafors 5 Piece Scandinavian Butt Chisel Set is ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic Deposition (EPD).

They are an everyday chisel, sharp, reliable and always at hand.

Comes with one of each size: 32mm, 25mm, 18mm, 12mm and 6mm.

Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportation.

PTDHULEDC5

The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece.

The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision.

Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button.

Replaceable nylon striker available as spare part.

The Hultafors Set of 4 HDC Heavy-Duty Chisels, that have a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all the way through for extreme durability and to maximise the force transmission down to the work piece.

The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision.

Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button.

Comes with one of each size: 20, 25, 32, 40mm

Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportatoin.

PTDHULHDC4

The Hulfafors Talmeter is a unique marking and measuring tool. Hard-wearing steel tape, that is scaled in millimetres, with ABS plastic casing. Combined measuring and marking edges that quickly and easily measure and mark both external and internal lengths. The tape and extender can be replaced and are available as spare parts.

The tape also measure diameters using the scale on the reverse of the tape and it also has a compass function which is useful when marking round shapes. The scale is always locked in normal position and the extender is easy to open out and retract with the easy-to-hold sliding carriage.

USING THE MARKING MEASURE. With a marking measure, you do not need to convert the measurements you have taken into units of measurement. Instead, all there is to it, is to fit in the combined marking and measuring edges between the measurement points on the object being measured. The scale is automatically fixed at this length and with the help of the same measuring and marking edges, you can then etch the length on to the work-piece. You can do it once or several times and with unwavering precision. You do not even need to see properly in order to make exact measurements and markings.

PTDGRPHULTALM3

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.

1 x Hultafors 207 Steel Pinch Bar 400mm (16in)

PTDHUL207400

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.

1 x Hultafors 207 Steel Pinch Bar 500mm (20in)

PTDHUL207500

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.

1 x Hultafors 207 Steel Pinch Bar 600mm (24in)

PTDHUL207600

The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.

Hultafors STFS30 Non-Rebound Hammer

PTDHULSTFS30

The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.

Hultafors STFS40 Non-Rebound Hammer

PTDHULSTFS40

The Hultafors TB600 Bricklayers Hammer has an ergonomic design that has been forged as one piece for increased durability with a vibration damping urethane plug. The steel shaft with I-beam provides increased durability. It is fitted with a tempered square striking face and a strong ground chisel with a notch for pulling out nails. The right angle and shape of chisel for safe splitting of bricks. The handle is fitted with a distinct end stop to ensure a secure grip and has a rubber cover to provide a comfortable grip.

PTDHULTB600

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.

PTDGRPHUL207400

The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.

PTDGRPHULSTFS30

The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece.

The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision.

Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button.

Replaceable nylon striker available as spare part.

Hultafors HDC20 Heavy-Duty Chisel 20mm

PTDHULHDC20

The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece.

The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision.

Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button.

Replaceable nylon striker available as spare part.

Hultafors HDC25 Heavy-Duty Chisel 25mm

PTDHULHDC25

The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece.

The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision.

Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button.

Replaceable nylon striker available as spare part.

Hultafors HDC32 Heavy-Duty Chisel 32mm

PTDHULHDC32

The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25 for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece.

The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision.

Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button.

Replaceable nylon striker available as spare part.

Hultafors HDC40 Heavy-Duty Chisel 40mm

PTDHULHDC40