Hand Tools

A universal handsaw offering all round cutting performance, ideally suited for softwoods and board material. The blade is coated in low friction PTFE.

The 1mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth for ultimate cutting performance.The soft grip handle with finger guide is designed to offer maximum comfort and it is suitable for cutting most woods, including rough wood and also board material.

Teeth 8 TPI,
The blade is PTFE coated.

PTDGRPJAK10505545

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard.

Hardpoint tenon saw with soft-grip handle for user comfort.

The ideal choice for fine carpentry and can be used with a mitre box.

PTDGRPJAK1360HP250

IRWIN Jack universal handsaw offering all round cutting performance, ideally suited for softwoods and board material. The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8 TPI for ultimate cutting performance.

The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.

Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine

PTDGRPJAK10505538

IRWIN Jack coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts.
The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8 TPI for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Plasterboard
Worktop
Teeth 8 TPI.

PTDGRPJAK10505542

IRWIN Jack Hardpoint fine tooth saw ideally suited for cutting hardwood, and for accurate finishing cuts. The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 10 TPI for ultimate cutting performance.

The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.

Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine

PTDGRPJAK10505555

IRWIN Jack Xpert Pro Light Concrete Saw with specially designed large teeth for cutting cellular concrete. The 1mm thick high quality steel blade ensures maximum stability and power transfer. Xpert soft-grip handle provides a positive, lightweight but durable grip, even during prolonged use. 45 and 90 angles on the handle which are useful for marking.

PTDGRPJAK10505548

IRWIN Jack Hardpoint fine tooth saw ideally suited for cutting hardwood, and for accurate finishing cuts. The fine tooth blade is coated in low friction PTFE for improved efficiency and wear resistance.

The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 10 TPI for ultimate cutting performance. The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.

Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine

PTDGRPJAK10505602

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4x the added protection than conventional anti-rust agents.

The handle is a proven design, light and strong with an ultrasonic welded soft-grip for increased hold and enhanced comfort. 90 and 45 angles integrated in the handle aid the user when marking out.

PTDGRPJAK880UN20

The IRWIN Jack EVO Universal Hand Saw features Human Interaction Technology, which perfectly matches the handle position to the tooth design, but also provides superior performance in speed, ease and quality of cut and reduces the required energy to do the job. This is also reflected by the usage of up to 100% of the blade.

The high-quality steel blade ensures maximum stability and power transfer, and the high angled nose increases blade stability. The blade is lacquered and gives up to four times better rust protection compared to traditional lacquer. The teeth are hardened for lasting sharpness and have an optimised design and set, which provides maximum versatility, speed and quality of cut.

To ensure maximum control, the EVO Universal Hand Saw has a finger rest. For comfort, it has a light and strong ultra sonic welded soft grip handle.

Ideal for most applications and materials.

PTDGRPJAKEVOUNI

IRWIN Jack shallow bladed, round nosed saw for cross cutting, mitre work, PVC, floorboards and similar items.

Soft-grip handle with finger guide for maximum comfort in prolonged use.

Screwed handle/blade assembly for added safety.
Length 330mm (13 in)
Teeth: 12 tpi.

PTDJAK10503533

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you dont have to work so hard.

Hardpoint tenon saw with soft-grip handle for user comfort.

The ideal choice for fine carpentry and can be used with a mitre box.

Size: 300mm (12 in).
Teeth 12 tpi

PTDJAK10503534

IRWIN Jack universal handsaw offering all round cutting performance, ideally suited for softwoods and board material. The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8 TPI for ultimate cutting performance.

The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.

Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine

Length 380mm (15 in)

PTDJAK10505538

IRWIN Jack universal handsaw offering all round cutting performance, ideally suited for softwoods and board material. The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8 TPI for ultimate cutting performance.

The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.

Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Worktop
Floorboard
Melamine

Length 550mm (22 in)
Teeth 8 TPI

PTDJAK10505541

IRWIN Jack coarse tooth handsaw ideally suited for laminated boards, plasterboard and fast ripping cuts.
The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 8 TPI for ultimate cutting performance. Deep gullets positioned along the cutting edge further enhance the cutting performance through greater volume removal of waste material.
The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.
Suitable for cutting the following timber:-
Hardwood
Softwood
Rough Timber
Board Sheet
Plasterboard
Worktop
Teeth 8 TPI.

Length 550mm (22 in)

PTDJAK10505542

IRWIN Jack Hardpoint fine tooth saw ideally suited for cutting hardwood, and for accurate finishing cuts. The 1 mm thick rigid nose blade is designed to offer maximum blade stability and features triple ground teeth 10 TPI for ultimate cutting performance.

The soft grip handle with finger guide is designed to offer maximum comfort during prolonged use and is securely fixed to the blade for added safety.

Suitable for cutting the following timber:-
Hardwood
Softwood
Board Sheet
Worktop
Dowel
Skirting board
Architrave
Floorboard
Melamine

Length 550mm (22 in)
Teeth 10 TPI

PTDJAK10505543