Hand Tools

Marshalltown PermaShape Finishing Gold Stainless Steel Trowel pre-worn finishing trowel with broken-in shape to eliminate line and ripple marks. They withstand the pressure of hard-trowelling and are made from the highest grade stainless steel, properly shaped and tempered to a golden finish. With a resilient DuraSoft handle which provides a soft feel, reduces fatigue and offers excellent durability.

Marshalltown MPB13GSD PermaShape Finishing Gold Stainless Steel Trowel

Size: 330 x 125mm (13 x 5in).

PTDM/TMPB13GSD

M22 Drywall Utility Saw has a heavy gauge blade securely attached to a contoured hardwood handle with ferrule. Cuts wallboard, masonite, plywood and wood.

Size: 150mm (6in).

PTDM/T22

The Marshalltown M48D gauging trowel solid forged from high grade tool steel and carefully taper ground and polished. Used primarily for measuring, mixing and applying small quantities of cement. The DuraSoft handle provides a soft feel, reduces fatigue and offers excellent durability.

Size: 180 x 86mm (7 x 3.3/8in).

PTDM/T48D

Hand Scarifier for the preparation of drywall surfaces to help keying of plaster.
The tines are heat-treated and they come with a plastic handle.

Size 200mm (8 in)

PTDM/T722

The Marshalltown M46 London Pattern Pointing Trowels are one-piece forged from highest carbon steel then heat treated for strength and durability. It has a polished steel ferrule and DuraSoft handle.

Made in USA.

M46115D Pointing Trowel London Pattern

Size: 125mm (5in).

PTDM/T46115D

The Marshalltown Tuck / Window Pointer is referred to as tuck pointer or joint filler. This trowel is forged in one piece and designed with high shank and lift. This tool is used to form joints between bricks for weatherproofing and to improve appearance.

It has a resilient DuraSoft handle that provides a soft feel, reduces fatigue and offers excellent durability.

It is available in a wide variety of widths.

Marshalltown M509D Tuck / Window Pointer

Size: 22 x 170mm (7/8 x 6 3/4in).

PTDM/T509D

The Marshalltown Tuck / Window Pointer is referred to as tuck pointer or joint filler. This trowel is forged in one piece and designed with high shank and lift. This tool is used to form joints between bricks for weatherproofing and to improve appearance.

It has a resilient DuraSoft handle that provides a soft feel, reduces fatigue and offers excellent durability.

It is available in a wide variety of widths.

Marshalltown M504D Tuck / Window Pointer

Size: 8 x 170mm (5/16 x 6 3/4in).

PTDM/T504D

34 Series Wide London pattern brick trowels are one-piece forged from highest carbon steel then heat treated for strength and durability. The handle rise is set for correct hang and balance. The blade is taper ground and polished.

The DuraSoft handle incorporates an integral finger guard, provides a soft feel, reduces fatigue and offers excellent durability.

Wide London trowels have a rounded heel which places mortar further forward on the blade than the Philadelphia Pattern Trowels.
Made in USA.

Wooden handle with polished steel ferrule.

Size. 300 x 145mm (12 x 5 3/4 in).

PTDM/T3412

The Marshalltown 33 London Pattern Brick Trowel is manufactured from a single piece of high grade tool steel. These trowels have been re-engineered and are produced on the most modern forging equipment available.

The blades are expertly ground from heel to toe and are London Pattern with a wooden or DuraSoft handle and polished steel ferrule. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels.

London Pattern with Durasoft handle incorporating a integral finger guard for protection against callouses, heat and cold.

Size: 280 x 125mm (11 x 4 7/8in).

PTDM/T3311D

The Marshalltown M24D Internal Dry Wall Corner Trowel is lightweight, made from one piece of stainless steel with an aluminium mounting. Fitted with a DuraSoft handle for user comfort.

Size: 125 x 94mm (5 x 3.3/4in)

PTDM/T24D

The Marshalltown 20D Hand Sander is lightweight and is fitted with an exclusive one-piece handle clamp that holds paper firmly and makes changing paper easy.

It has a bonded foam pad and DuraSoft handle, and is designed for pre-cut or half sheet standard sandpaper.

PTDM/T20D

MXS Gold Finishing Trowels have a stainless steel blade tempered to a golden finish, made from the highest grade hardened and tempered bright stainless steel blade, which is properly shaped. The aluminum alloy Xtralite mounting is lightweight but very strong and has a resilient DuraSoft handle which provides a soft feel, reduces fatigue, and offers excellent durability.

Size 400 x 125mm (16 x 5 in)

PTDM/TMXS165GD

Marshalltown Square Notched Trowel is made to the same high standards as regular plasterers trowels. The blade is cross-ground to maintain its shape and is polished and machine finished to ensure perfect end-to-post fit. It features alloy mountings, fully heat-treated for increased strength and hardened steel rivets attach blades to the mountings. The DuraSoft handle provides a soft feel, reduces fatigue and offers excellent durability.

1 x Marshalltown M702SD Notched Trowel Square 1/4in DuraSoft Handle 11 x 4.1/2in

PTDM/T702SD

This Marshalltown jointing knife is made from heat-treated, hardened and tempered annealed steel for an even hardness throughout the blade.

It has a full tang throughout the handle, with a hammer end.

The Marshalltown M-T5743 Joint knife has the following dimensions:
Size: 100mm (4 inch)

PTDM/T5743

This Marshalltown jointing knife is made from heat-treated, hardened and tempered annealed steel for an even hardness throughout the blade.

It has a full tang throughout the handle, with a hammer end.

The Marshalltown M-T5763 Joint knife has the following dimensions:
Size: 150mm (6 inch)

PTDM/T5763