Hand Tools

The Roughneck Roofing Demolition & Lifting Bar is ideal when working overhead, such as taking down ceilings, ripping off roof laths and working in confined spaces. The tusks are hardened and tempered and the heel rounded to distribute pressure over a larger area.

The side by side chisel ends can be rested on joists for added leverage when removing roof lathes, taking down ceilings and general demolition work. Saves time, energy and increases safety reducing the chance of injury.

PTDROU64642

The Roughneck Double Ended Nail Puller is manufactured from drop-forged alloy steel, hardened and tempered with a hexagonal shank. With a black painted finish and an integral nail puller to aid the removal of embedded nails.

PTDROU64491

The Roughneck Demolition & Lifting Bar increases safety, reducing the chance of injury. Ideal for lifting floorboards, removing ceiling boards, breaking pallets, removing roofing laths, lifting heavy objects and all types of demolition work. Also for lifting up large items (e.g slabs) with less risk of items dropping when prising up. The tusks are hardened and tempered and the heel is rounded to distribute pressure over a larger area.

PTDROU64640

The safe and convenient way to carry plasterboards, wood panels etc.
It has a strong yet lightweight design and helps avoid back injury.
Maximum load capacity of 80Kg (176lb).

PTDROU32025

The Roughneck Auger Type Posthole Digger made from heavy gauge metal for extra strength. It has a long, tubular T-handle for easy application. Ideal for digging and scooping out a hole of 152mm (6in) diameter. Its hardened blade will cut through most soils and clays.

Specification

Thread Diameter: 152mm (6in)
Handle Length: 1.08m (42.1/2in)

PTDROU68260

The Roughneck Aligning Bars are made from drop-forged alloy steel, hardened and tempered and with a hexagonal shank and polished tips.

Ideal for aligning bolt holes during steel construction.

1 x Roughneck Chrome Plated Aligning Bar 610mm (24in)

PTDROU64455

The Roughneck Telegraph Digger Bar has an extra wide chisel blade designed for heavier breaking and a pointed tip for breaking stone and concrete. The drop forged steel construction has specific heat treated working areas and a black powder coated finish with polished tips.

PTDROU64562

The Roughneck Gorilla Bar has a low profile claw that fits further under the workpiece for increased prying power and the wider claw surface offers better control whilst resisting sinking into the support surface.

Made from drop-forged alloy steel hardened and tempered, with polished tips, and oval shaped for better control and strength.

This 3 Piece Gorilla Bar Set contains the following:

1 x Gorilla Bar Junior 356mm (14in)
1 x Gorilla Bar 610mm (24in)
1 x Gorilla Bar 914mm (36in)

PTDROU64401

The Roughneck Big Mutt Pro Multi Scraper has a heat treated roll forged steel blade with bevelled cutting edge for durability and clean cutting. With a polished tip for easy cleaning. The blade can be re-sharpened to maintain its cutting edge. It has a polyethylene coated steel handle fitted with a D grip handle.

Specification

Blade Size: 225 x 175mm (9 x 7in)
Overall Handle Length: 1640mm (64.1/2in)

PTDROU64398

The Roughneck Pick Mattock has a head made from roll forged alloy steel, hardened and tempered and with a black painted finish. Pointed pick at one end and mattock on the other, ideal for cutting roots and breaking up soil. The fibreglass handle has a solid core and polypropylene cover.

Supplied in a handy carry box.

PTDROU64152

The Roughneck Cutter Mattock has a head made from roll forged alloy steel, hardened and tempered and with a black painted finish. It has a horizontal mattock edge at one end and a vertical one at the other. Ideal for cutting roots and breaking up soil. The fibreglass handle has a solid core and polypropylene cover.

Supplied in a handy carry box.

PTDROU64252

This Roughneck Slate Bar has a bent chisel for increased leverage and a pointed tip for breaking stone and concrete. With a drop forged steel construction that has specific heat treated working areas, and a black finish with polished tips.

PTDROU64585

Roughneck Gorilla Gripper is a safe and easy way to grip, lift and carry all types of sheet materials, doors and worktops. Made from aircraft quality aluminium with special rubber gripping pads. Significantly reduces stress and potential injuries to your back, shoulders, neck, hands and fingers. A must for those handling large cumbersome boards and doors on a daily basis.

Soft grip cushioned handle with 3 sizes available, up to 19mm, 10 to 28mm and 35 to 50 mm, to handle the majority of board and door thicknesses.

This Roughneck ROU32600 will clamp easily to boards or doors up to 19mm for ease of movement around rooms or worksite.

PTDROU32600

Roughneck Gorilla Gripper is a safe and easy way to grip, lift and carry all types of sheet materials, doors and worktops. Made from aircraft quality aluminium with special rubber gripping pads. Significantly reduces stress and potential injuries to your back, shoulders, neck, hands and fingers. A must for those handling large cumbersome boards and doors on a daily basis.

Soft grip cushioned handle with 3 sizes available, up to 19mm, 10 to 28mm and 35 to 50 mm, to handle the majority of board and door thicknesses.

This Roughneck ROU32610 iwill clamp easily to boards or doors from 10mm up to 28mm for ease of movement around rooms or work site.

PTDROU32610

The Roughneck Multi-Purpose Bar Set, contains the following:

2 x Traditional Wrecking Bars: 300mm (12in) x 1/2in Hex, 450mm (18in) x 5/8in Hex. Suitable for pulling large nails, wrecking and dismantling.

2 x Utility Bars: 175mm (7in), 375mm (15in). Suitable for pulling nails, wrecking, dismantling and prying.

1 x Aligning Bar: 610mm x 19mm (24 x 3/4in). Suitable for prying and aligning bolt holes and connecting hardware.

PTDROU64965