Hand Tools

Sievert high pressure regulator (10kg) with hose failure valve.

The pressure regulator has a P.O.L. (Prest-o-Lite) fitting - a fitting used exclusively for flammable gases.

3/8 inch outlet.

PTDPRM305401

The Sivert 2.5Kw ASBR Single Cast Iron LPG Boiling Ring.

8mm diameter hose and low pressure regulator are required - NOT SUPPLIED.

PTDPRMASBR

5mm inline LPG Hose to Hose Connector.

PTDPRMB1042

The Sievert ERP11A5 20in Pigtail for connecting a cylinder to a Tee Piece. With P.O.L. to P.O.L. fitting, used exclusively for flammable gases.

PTDPRMERP11A5

The Sievert B1022 3/8in Nut with 6mm tail for connecting 6mm LPG hose to a 3/8in male connector.

PTDPRMB1022

The Sievert 4 Bar 8kg High Pressure Regulator 3/8 BSP fits standard POL valve cylinders. Suitable to run many high pressure appliances such as roofing torches, blow lamps, etc.

Inlet: 5/8in POL.
Outlet: 3/8 BSP LH.
Outlet Pressure: 4 bar.
Capacity: 8kg.

PTDPRMIGT305

Primus 8303 Sealing Washer for Primus valve to cylinder.
Pack. 2.

PTDPRM8303

The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.

Size 2 metre .

PTDPRMS717321

The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.

Size 10 metre

PTDPRMS717431

The Detail Roofing Kits feature a heavy-duty burner ideal for drying, bitumen laying and detail work on roofs, road works and other heat demanding applications like preheating before weldings, melting snow and ice etc.

The kit comes complete with a 4 or 10 metre hose and a hose failure valve. The burner and steel neck-tube are fixed to the handle and are not interchangeable.

Ideal for engineering and detailing work.

Burner Diameter: 50mm.
Heat Input: 86kW.

Hose length: 4 metres.

PTDPRM3444KIT

The Promatic 38mm 11.5kW Soft Flame Burner used for cable work and heat shrink applications such as the joining of electrical and telecommunications cables.

For use with PRMS3366 Handle.

PTDPRMS3341

The Multi-Purpose Kit has a manual ignition blowtorch assembly with a standard blowlamp type nozzle, 7.7kW output and is suitable for all general heating work.

Suitable for plumbing, building, roofing and engineering applications.

Hose Length: 4m.

PTDPRMPMPXKIT

The Sievert Pro 86/88 Brass Tubes are for use with the PRMS3486 and PRMS3488 handles and separate burner tips. They allow the extension of the handle according to the use required.

180mm Short Neck Tube with Hook.

PTDPRMS3509

The Sievert 50mm 86kW Power Burner is a heavy-duty, lightweight power burner with extremely strong windproof flames capable of withstanding the severest weather conditions. Ideal for drying, bitumen laying, detail and field torching and other demanding applications.

For use with PRMS3509, PRMS3510 or PRMS3511.

PTDPRMS2944

The Turbo Roofing Kits feature a heavy-duty burner ideal for drying, bitumen laying and detail work on roofs, roadworks and other heat demanding applications like preheating before weldings, melting snow and ice etc.

The kit comes complete with hose and a hose failure valve. The burner and steel neck-tube are fixed to the handle and are not interchangeable.

Burner Diameter: 60mm.
Heat Input: 114 kW.

Hose length: 4 metres.

PTDPRM3460KIT