Hand Tools

Spare point for the Starrett 18A automatic punch.

PTDSTR18APOINT

The Starrett Prosite Protractor takes the error-prone calculations out of the process of mitre cuts. Simply set your saw to the angle that you read. Upside down or backwards, the reading is always correct. This easy-to-use tool has two scales. The Mitre Cut arrow and internal scale indicate the exact mitre saw setting for an accurate mitre joint every time. The Single Cut arrow and the outer scale indicate the exact mitre saw setting for fitting a single work piece to an angle.

It is ideal for carpenters, plumbers and all building trades that require the measuring and transfer of angles.

Length: 300 mm (12in)

PTDSTR505A12

The Starrett Prosite Protractor takes the error-prone calculations out of the process of mitre cuts. Simply set your saw to the angle that you read. Upside down or backwards, the reading is always correct. This easy-to-use tool has two scales. The Mitre Cut arrow and internal scale indicate the exact mitre saw setting for an accurate mitre joint every time. The Single Cut arrow and the outer scale indicate the exact mitre saw setting for fitting a single work piece to an angle.

It is ideal for carpenters, plumbers and all building trades that require the measuring and transfer of angles.

Length: 175 mm (7in)

PTDSTR505A7

Especially adaptable for delicate work. The revolving heads are concave and hexagonal for sensitive control. Blades are hardened and tempered. Overall length of screwdrivers are approximately 95 mm (3 3/4in).

Set of seven in case: 0.6mm (0.025in), 1mm (0.040in), 1.4mm (0.055in) 1.8mm (0.070in), 2 mm(0.080in), 2.5mm (0.100in) and Phillips No. 0.

PTDSTRS555Z7

The Starrett H11-1224 square head is made from cast iron with a black wrinkle finish.

Fits blades 12in, 24in, 300mm & 600mm.

PTDSTRH111224

Cast iron protractor head with a black wrinkle finish.
Fits blade size: 300mm (12 in) and 600mm (24 in)

PTDSTRPR1224W

The Starrett C11-1224 Centre Head is made from cast iron with a black wrinkle finish.

Fits blades 12in, 24in, 300mm & 600mm.

PTDSTRC111224

The Starrett C493ME Protractor & Depth Gauge features an angular measurement range of 0-180 in opposite directions allowing the direct reading of angles and supplementary angles. Depths are measured from a 150mm (6in) blade.

Graduation: 1/2mm (64ths).

PTDSTRC493ME

Supplied with accurate ground and graduated main vial and cross test vial. Adjustable to a positive setting the main vial is housed in a satin finished brass tube with a cover to prevent breakage. The level features an involute groove running the base length providing a reliable seat on cylindrical workpieces.
Size: 150mm (6 in).

PTDSTR986

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch.

Whitworth standard - 55 threads

No. of leaves: 30

TPI range: 3 1/2 - 60

With positive stop.

PTDSTR476

Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. Locking device on all sets.

Inch Reading Gauges with Tapered leaves 1/2-1/4 x 3 1/32 in

No. of leaves: 9

Range: 0.0015 - 0.015 in ( 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).

PTDSTR172AT

Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. Locking device on all sets.

Inch Reading Gauges with Tapered leaves 1/2-1/4 x 6 in

No. of leaves: 8

Range: 0.002 - 0.015 in ( 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).

PTDSTR172CT

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Tapered leaves 12.7-7 x 114mm

No. of leaves: 9

Range 0.04 - 0.3mm (0.04-0.08 by 0.01mm steps, 0.10, 0.15, 0.20 and 0.30mm).

PTDSTR172MBT

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Straight leaves 12.7 x 77mm

No. of leaves: 13

Range: 0.03 - 0.5mm ( 0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)

PTDSTR173MA

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Tapered leaves 12.7-7 x 77mm,

No. of leaves: 13

Range 0.03 - 0.5mm (0.03 to 0.10 by 0.01mm steps, 0.15, 0.20, 0.30, 0.40 and 0.50mm).

PTDSTR173MAT