Hand Tools

Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft.

The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage.

Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available.

They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance.

(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)

Size: 1.
Weight 590g (1 1/2lb).
Diameter 32mm (1 1/4 in).

PTDTHO10

Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdirected blows. The faces are designed to wear and be replaced by hand. These Dead Blow Hammers are twin-faced and fitted as standard with screw-in white nylon faces. For certain specialist applications, brown polyurethane faces may be preferred and are available to purchase separately.

A multipurpose striking tool, they are ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Available in 5 different weights.

Diameter: 32mm (1.1/4in).
Weight: 550g (1 lb).

PTDTHO1010

Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight.

These hide mallets are widely used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc.

These Mallets are fitted with an oval wood handle.

108: Size 0.

Weight 60g (2oz).
Diameter 25mm (1in).

PTDTHO108

Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer.

Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage.

The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.

Faces are designed to wear and be replaced.

For use with size 1 Thor split head hammers .
Face diameter 32mm (1 1/4 in)

PTDTHO10R

Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight.

These hide mallets are widely used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc.

These Mallets are fitted with an oval wood handle.

Size: 1.

Weight 115g (1/4 lb).
Diameter 32 mm (1 1/4 in).

PTDTHO110

Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight.

These hide mallets are widely used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc.

These Mallets are fitted with an oval wood handle.

Size: 3.

Weigh : 225g (1/2 lb).
Diameter: 44 mm (1 3/4 in).

PTDTHO114

Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight.

These hide mallets are widely used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc.

These Mallets are fitted with an oval wood handle.

Size: 4.

Weight 340g (3/4 lb)
Diameter 50 mm (2 in).

PTDTHO116

Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft.

The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage.

Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available.

They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance.

(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)

Size: 2.
Weight 825g (2lb).
Diameter 38mm (1 1/2 in).

PTDTHO12

Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight.

These hide mallets are widely used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc.

These Mallets are fitted with an oval wood handle.

Size: 5.

Weight 570g (1 1/4 lb).
Diameter 63 mm (2 1/2 in).

PTDTHO120

Thor Dead Blow Hammers have a coated die-cast aluminium alloy head with a rubber grip and screw-in faces.

The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force.

All faces are one-piece moulded with a shoulder for extra strength and to prevent fracture from misdirected blows. The faces are designed to wear and be replaced by hand. These Dead Blow Hammers are twin-faced and fitted as standard with screw-in white nylon faces. For certain specialist applications, brown polyurethane faces may be preferred and are available to purchase separately.

A multipurpose striking tool, they are ideal for sustained and effective blows without recoil. Commonly used in most assembly/fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.

Available in 5 different weights.

Diameter: 38mm (1.1/2in).
Weight: 700g (1.3/4 lb).

PTDTHO1212

Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight.

These hide mallets are widely used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc.

These Mallets are fitted with an oval wood handle.

Size: 6.

Weight 680g (1 1/2 lb).
Diameter 70 mm (2 3/4 in).

PTDTHO122

Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65.

The best all-purpose nylon face for light and heavy assembly work.

For use with size 1 Thor split head hammers.

Face diameter: 32 mm (1 1/4 in).

PTDTHO125NF

Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer.

Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage.

The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.

Faces are designed to wear and be replaced.

For use with size 2 Thor split head hammers .
Face diameter 38mm (1 1/2 in)

PTDTHO12R

Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft.

The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage.

Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available.

They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance.

(No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)

Size: 3.
Weight 1230g (3 lb)
Diameter 44mm (1 3/4 in).

PTDTHO14

Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer.

Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage.

The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area.

Faces are designed to wear and be replaced.

For use with size 3 Thor split head hammers .
Face diameter 44mm (1 3/4 in)

PTDTHO14R