Sockets & Accessories - 1-2in Drive

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 15mm.
Length: 38mm.

PTDSTW5015

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 26mm.
Length: 42mm.

PTDSTW5026

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 27mm.
Length: 45mm.

PTDSTW5027

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 28mm.
Length: 45mm.

PTDSTW5028

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 32mm.
Length: 47mm.

PTDSTW5032

Stahlwille eries 50A Series Bi-hexagon imperial AF sockets have 1/2in square drives. They are made from HPQ high performance steel and are chrome plated.

The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads).

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 1 1/8 AF.
Length: 45mm.

PTDSTW50A118

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 15mm.
Length: 38mm.

PTDSTW5215

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 20mm.
Length: 42mm.

PTDSTW5220

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 26mm.
Length: 42mm.

PTDSTW5226

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 30mm.
Length: 45mm.

PTDSTW5230

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 32mm.
Length: 47mm.

PTDSTW5232

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 34mm.
Length: 47mm.

PTDSTW5234