Torque Wrenches

All Britool 1/2in square drive torque wrenches indicate with touch, sound and sight when the required torque is reached.

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

This Britool torque wrench range is distinguishable by a length independent mechanism, push through reversible mechanism and a retractable adjustment mechanism, which avoids accidental adjustment. The torque wrench complies with ISO 6789 and is supplied in a sturdy plastic storage case.

Includes calibration certificate.

PTDGRPBRIEVT600A

Required torque loads are set by turning the sleeve until the required setting is opposite the mark.

All Britool 3/8in Square torque wrenches indicate with touch, sound and sight when the required torque is reached.

This Britool torque wrench range is distinguishable by a length independent mechanism, push through reversible mechanism and a retractable adjustment mechanism, which avoids accidental adjustment. The torque wrench complies with ISO 6789 and is supplied in sturdy plastic storage case.

PTDGRPBRIAVT100A

Stahlwille Torque Wrenches have blank ends to accept interchangeable insert tools (sizes 9 x 12 or 14 x 18).

The unique triggering cam mechanism means that the internal mechanism is only under load when force is applied to the wrench; there is no need to back the wrench off after use.

The internal mechanism is extremely resistant to mechanical wear and is protected against dirt ingress. Suitable for use in the clockwise or anti-clockwise direction, simply by turning the wrench and insert tool over.

The two-component handle is made of extremely tough, impact resistant plastic, which is resistant to oils, grease, fuels, brake fluids and Skydrol.

The torque wrench has a clearly visible twin scale (Nm and ft.lb). It is quick and easy to set using the QuickSelect rapid setting.

Max deviation of indication 3%.

Supplied with factory calibration certificate, valid from day of first use.

MADE IN GERMANY.

Stahlwille 730N Torque Wrench.

Overall length: 890 mm.
Capacity: 130 to 650Nm / 100 to 480 ft.lb.

PTDSTW730N65

Stahlwille reversible, fine tooth Ratchet Insert Tool with 60 teeth.

Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003.

NOTE: Please pay attention to insert size required - 9 x 12 or 14 x 18.
CAUTION: A modified torque setting is required if using the size 40HD.

MADE IN GERMANY.

Stahlwille Ratchet Insert Tool.

Size: 14 x 18mm.
Drive: 3/8 in.

PTDSTW73540HD

The Norbar ClickTronic shares its mechanics with our popular and proven Professional range of torque wrenches and complemented by a sleek, stylish two-piece injection moulded handle which incorporates the digital display on one side and a calibration reminder TimeStrip on the opposite side. TimeStrip provides visual indication of when the wrench may need calibration.

The digital display, O.L.E.D. provides a clear and easy to read display, significantly reducing setting errors. It is fitted with a push/pull lock which is fast and intuitive to use. A coloured band on the lock clearly indicates that the wrench is unlocked. Fitted with a rechargeable lithium battery and includes a mini-USB to USB charging lead.

Norbar Model 100 ClickTronic Torque Wrench

Specification

Drive: 1/2in Square Drive.
Range: 20-100Nm
Ratchet Diameter:
Ratchet Teeth:
Ratchet Type:
Length:
Weight:

PTDNOR15167

The Norbar ClickTronic shares its mechanics with our popular and proven Professional range of torque wrenches and complemented by a sleek, stylish two-piece injection moulded handle which incorporates the digital display on one side and a calibration reminder TimeStrip on the opposite side. TimeStrip provides visual indication of when the wrench may need calibration.

The digital display, O.L.E.D. provides a clear and easy to read display, significantly reducing setting errors. It is fitted with a push/pull lock which is fast and intuitive to use. A coloured band on the lock clearly indicates that the wrench is unlocked. Fitted with a rechargeable lithium battery and includes a mini-USB to USB charging lead.

PTDGRPNOR15157

Stahlwille Torque Wrenches have blank ends to accept interchangeable insert tools (sizes 9 x 12 or 14 x 18).

The unique triggering cam mechanism means that the internal mechanism is only under load when force is applied to the wrench; there is no need to back the wrench off after use.

The internal mechanism is extremely resistant to mechanical wear and is protected against dirt ingress. Suitable for use in the clockwise or anti-clockwise direction, simply by turning the wrench and insert tool over.

The two-component handle is made of extremely tough, impact resistant plastic, which is resistant to oils, grease, fuels, brake fluids and Skydrol.

The torque wrench has a clearly visible twin scale (Nm and ft.lb). It is quick and easy to set using the QuickSelect rapid setting.

Max deviation of indication 3%.

Supplied with factory calibration certificate, valid from day of first use.

MADE IN GERMANY.

PTDGRPSTW730N5

Stahlwille reversible, fine tooth Ratchet Insert Tool with 60 teeth.

Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003.

NOTE: Please pay attention to insert size required - 9 x 12 or 14 x 18.
CAUTION: A modified torque setting is required if using the size 40HD.

MADE IN GERMANY.

PTDGRPSTW73510

This Teng Tools torque wrench is manufactured according to DIN 3122 standards. With a ratchet head, the torque wrench can be used for both tightening and final checking of the torque. The wrench is equipped with an angular gauge for after tightening. It is graduated in both Nm and ft.lb, and has a degree scale for after tightening of cylinder heads.

The ratchet head has a satin finish and for comfort and excellent grip, the wrench has a rubber handle.

Accuracy: 4%.
Drive: 1/2in Square Drive.

PTDGRPTEN1292AGEP

With ratchet, the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right-hand action for torque checking. Equipped with angular gauge for after tightening.
Satin finish and rubber handle.
Graduated in Nm and ft.lb. with lockable setting.
Accuracy: 4%.
3/4in. Square drive.

Manufactured according to DIN 3122.

PTDGRPTEN3492AGE

3/8in Square Drive torque wrench with flip reverse ratchet action, and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88.

The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45. Both the torque and angular gauge can be set with the one tool.
Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035). Supplied in a robust oil resistant case.

PTDGRPTEN3892AGE1

The Norbar Adjustable Industrial Torque Wrenches have a robust construction, which gives accurate results to 4%, even in arduous working conditions. Their large break angle improves accuracy by reducing the possibility of over torquing and the cam control of the mechanism gives a controlled break which will not throw the operator off balance. The torque wrenches are dual scaled, with both Nm (Newton Meters) and lb.ft graduations.

Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017 and carry case for storage and protection.

PTDGRPNOR12001

The Norbar TTi Wrenches are accurate upto 3%, which meets all international standards for torque wrenches. Every wrench comes with a traceable calibration certificate. Quick and light adjustment over the entire scale can be quickly achieved with minimal effort in approximately 10 complete turns (exact number varies by model) and they have a micrometer scale for simple and error free setting.

All models have an adjustment lock to prevent accidental adjustment of the set torque. The ratchets have a narrow engagement angle of 5 on the TTi50 and 6 on all other models, allowing easy positioning of the tool in the tight confines of todays vehicles and machines.

They also have a comfortable, durable handle that is constructed using 2 materials: a base material for strength overlaid with a soft feel grip for comfort and slip resistance. The handle and lens resist chemicals in common usage in the automotive, aviation and industrial environments.

PTDGRPNOR13285

The Norbar Professional Torque Wrench Models 650 1500 are highly accurate up to a reading of 3%. The wrenches are non- length dependent. An extension handle can be used to reduce operator effort (handle supplied as standard with Model 1000 and 1500).

The wrenches are easy to use; a positive click can be heard, seen and felt, helping to prevent over torqueing. Have a long scale where the length is shown in Nm and lbf.ft. The fine 60 tooth ratchet allows the wrench to be used in confined areas.

Supplied with a declaration of conformance to satisfy the requirements of ISO 6789-2:2017 and a carry case for storage and protection.

PTDGRPNOR14001

Norbar HT3 Torque Multiplier with a 5:1 torque multiplication, and accuracy guaranteed to better than 4%. It comes with two reaction bar styles to offer maximum versatility. It has a robust construction that allows for minimal maintenance, whilst maximising working life.

Supplied in a carrying case, it is ideal for inclusion in the heavy vehicle tool kit. The 1300 Nm version has a spare 3/4in output square included in the kit.

PTDGRPNOR17220