Diagonal & Side Cutting Pliers

The Milwaukee Hand Tools Diagonal Pliers have a 15 offset head which allows flush cutting. Can also be used as a nail puller for easier and quicker prying and pulling. Made from chrome vanadium steel for increased durability and good rust protection. With laser hardened cutting edges, jaws extra hardened to 64 HRC, and deburring ribs on head for pipe up to 25mm. The tips are off-set ground to protect cutting edges from damage if dropped.

High leverage design with long handles for maximum cutting power and leverage. The handles are fitted with ergonomic, overmoulded grips for added comfort. These pliers are ideal for universal all-round cutting applications.

PTDGRPMHT48226106

The Roughneck Diagonal Cutting Pliers for cutting wires. They are made from high-quality steel, that has been drop-forged, hardened and tempered. In addition, the cutting edge is induction hardened for added durability. They have finely polished heads with a clear lacquer coating that helps prevent rust. Fully encased spring-loaded mechanism for ease of use.

The pliers are fitted with comfortable double injected, air-cushion grips that help to reduce fatigue during use. The handles also feature a handy lanyard hole.

Manufactured to DIN ISO 5746 Standard.

PTDGRPROU10120

The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment.

The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.

Size. 5.1/2in - 140mm

PTDMAU2990140

The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment.

The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.

Size. 6.1/2in - 160mm

PTDMAU2990160

The essential feature of all Maun Diagonal Cutting Nippers is the accuracy of the cutting edges and the quality of the steel and heat-treatment.

The compound lever design gives good mechanical advantage, allowing the plier to cut piano wire with handle loads significantly less than conventional forged pliers of equivalent size.

Length 160mm (6 1/2 in)
P.V.C. Sleeved.

PTDMAU2999160

IRWIN Vise-Grip Cable Cutter have an induction hardened chromium nickel steel cutting face that stay sharper for longer.

The pliers also feature machined jaws for maximum gripping strength and the moulded ProTouch handles for added comfort and less hand fatigue.

Can cut up to 2.0 mm cables and a moulded 1 component handle that is pull-resistant.

Length: 175mm (7in).

PTDVIS10505494

This high leverage side cutting plier has serrated flat jaws with a built-in cutter on the side which is capable of cutting ISO standard piano wire.

Size: 165mm (6 1/2 in).

PTDMAU4950160

This high leverage side cutting plier has serrated flat jaws with a built-in cutter on the side which is capable of cutting ISO standard piano wire.

Size 165mm (6 1/2 in).
Spring return

PTDMAU4951160

Bahco Side Cutting Pliers for cutting hard materials such as piano wire, copper wire and plastic insulated wire. They are made form high performance alloy steel and have two-component handles for comfort.

PTDGRPBAH2171G140

These Stanley FatMax Diagonal Cuttting Pliers have an angled head for flush cuts. Made from heat treated high chrome steel with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a secure grip and increased comfort.

Ideal for cutting piano wire, copper wire and aluminium.

1 x Stanley FatMax Angled Diagonal Cutting Pliers 200mm (8in)

PTDSTA089859

These Stanley FatMax Diagonal Cuttting Pliers have an angled head for flush cuts. Made from heat treated high chrome steel with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a secure grip and increased comfort.

Ideal for cutting piano wire, copper wire and aluminium.

1 x Stanley FatMax Angled Diagonal Cutting Pliers 160mm (6.1/4in)

PTDSTA089860

These Stanley FatMax Diagonal Cuttting Pliers have an angled head for flush cuts. Made from heat treated high chrome steel with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a secure grip and increased comfort.

Ideal for cutting piano wire, copper wire and aluminium.

1 x Stanley FatMax Angled Diagonal Cutting Pliers 200mm (8in)

PTDSTA089861

A flat cutter for wire with hardened steel plate jaws.
The handles are zinc plated and are fitted with a return spring.

Used for cutting soft wire.
Unsleeved.

PTDMAU2850100

The Bahco ERGO Side Cutting Pliers are made from high-performance steel, with a black anti-corrosion finish and edges which are induction hardened at 62 HRC. They have 2-component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip.

Progressive edges allow the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges.

The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. The round shaped jaws give improved accessibility in confined spaces. The pliers are equipped with a return spring featuring an on/off function. The ON-OFF return spring increases ease of cutting with an automatic opening of the jaws. For transport or storage, the spring function can be safely deactivated when not in use.

PTDGRPBAH2101G125N

The Bahco ERGO Side Cutting Heavy-Duty Pliers are made from high performance steel, with a black anti-corrosion finish and their edges are induction hardened at 62 HRC. They are designed to outlive more than 50,000 cuts of hard wire.

The pliers have two component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip. Progressive edges allows the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges.

The heavy-duty cutting edge provides a sturdy cut all over the blade. The reinforced metal frame has been designed to withstand extreme conditions and hold up extra hard wires.

The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. The round shaped jaws give improved accessibility in confined spaces. The pliers are equipped with a return spring featuring an on/off function. The ON-OFF return spring increases ease of cutting with an automatic opening of the jaws. For transport or storage, the spring function can be safely deactivated when not in use.

PTDGRPBAH21HDG140