39 items

Electronic Cutters & Nipper Pliers

Electronic Cutters & Nipper Pliers
View as Grid List

39 items

Set Ascending Direction Set Descending Direction
  1. Lindstrom Diagonal Cutting Ultra Flush Cut Nipper 110mm

    SKU: PTDLIN8142

    List Price:  

    £73.62

    Our Price:  

    £43.96

    Inc VAT:  

    £52.75

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 110 mm (4.3/8 in).
    Blade length (B): 10mm (0.39 in).
    Head width (C): 10mm (0.39 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 0.8mm (0.03 in).
    Cutting Capacity: 0.1-1.0mm.

    Cutting edge: Ultra flush.

    The Ultra flush cutter virtually eliminates the pinch that other cutters make. The cutters configure two flat planes, with a barely discernible line separating each of these planar surfaces. They are perfect for use in close tolerance electronic and medical device assembly, where concerns about final lead-end configuration and mechanical shock transmission are a top priority.

    PTDLIN8142

    Learn More
  2. Lindstrom Supreme Short Snipe Nose Smooth Jaw Pliers 120mm

    SKU: PTDLIN7893

    List Price:  

    £67.82

    Our Price:  

    £40.49

    Inc VAT:  

    £48.59

    Lindstrom 7893 Supreme Snipe Nose Pliers are produced from high performance tool steel. These snipe nose holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved.

    The smooth jaws minimise the risk of damage and scratching surfaces.

    Length (A): 120mm (4.72 in).
    Jaw length (B): 20mm (0.79 in).
    Head width (C): 9mm (0.35 in).
    Head depth (D): 6mm (0.24 in).
    Tip width (E): 1.2mm (0.05 in).
    Tip depth (F): 0.8mm (0.03 in).

    PTDLIN7893

    Learn More
  3. Lindstrom Supreme Diagonal Cutting Micro Bevel Cut Tapered Head Nipper 109mm

    SKU: PTDLIN7190

    List Price:  

    £77.88

    Our Price:  

    £46.50

    Inc VAT:  

    £55.80

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 109mm (4.29 in).
    Blade length (B): 9mm (0.35 in).
    Head width (C): 9mm (0.35 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 1.0mm (0.04 in).
    Cutting capacity: 0.2-1.25mm.

    Head type: Tapered
    Cutting edge: Micro-bevel.

    The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN7190

    Learn More
  4. Lindstrom Diagonal Cutting Flush Cut Nipper 110mm

    SKU: PTDLIN8141

    List Price:  

    £66.00

    Our Price:  

    £39.41

    Inc VAT:  

    £47.29

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 110mm (4.3/8 in)
    Blade length (B): 10mm (0.39 in).
    Head width (C): 10mm (0.39 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 0.8mm (0.03 in).
    Cutting Capacity: 0.1-1.25mm.

    Cutting edge: Flush Bevel.

    The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

    PTDLIN8141

    Learn More
  5. Lindstrom Diagonal Cutting Micro Bevel Cut Nipper 112.5mm

    SKU: PTDLIN8150

    List Price:  

    £81.25

    Our Price:  

    £48.51

    Inc VAT:  

    £58.21

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 112mm (4.1/2in).
    Blade length (B): 12.5mm (0.5 in).
    Head width (C): 12.5mm (0.5 in).
    Head depth (D): 6.0mm (0.24 in).
    Tip width: (F): 1.2mm (0.05 in).
    Cutting capacity: 0.3-1.6mm.

    Cutting edge: Micro-bevel.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN8150

    Learn More
  6. Lindstrom Diagonal Cutting Micro Bevel Cut Nipper 125mm

    SKU: PTDLIN8160

    List Price:  

    £78.05

    Our Price:  

    £46.60

    Inc VAT:  

    £55.92

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 125mm (5 in).
    Blade length (B): 16mm (0.63 in).
    Head width (C): 16mm (0.63 in).
    Head depth (D): 8mm (0.31 in).
    Tip width: (F): 1.6mm (0.06 in).
    Cutting capacity: 0.4-2.0mm.

    Cutting edge: Micro-bevel.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN8160

    Learn More
  7. Lindstrom Supreme Oblique Cutting Micro Bevel Cut Double Angled Head Nipper 108mm

    SKU: PTDLIN7290

    List Price:  

    £84.34

    Our Price:  

    £50.35

    Inc VAT:  

    £60.42

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 108mm (4.25 in).
    Blade length (B): 8mm (0.31 in).
    Head width (C): 10.5mm (0.41 in).
    Head depth (G): 15mm (0.59 in).
    Cutting capacity: 0.35-1.25mm.

    Head type: Double angled.
    Cutting edge: Micro-bevel.

    Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN7290

    Learn More
  8. Lindstrom Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108mm

    SKU: PTDLIN7291

    List Price:  

    £93.71

    Our Price:  

    £55.94

    Inc VAT:  

    £67.13

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 108mm (4.25 in).
    Blade length (B): 8mm (0.31 in).
    Head width (C): 10.5mm (0.41 in).
    Head depth (G): 15mm (0.59 in).
    Cutting capacity: 0.35-1.25mm.

    Head type: Double angled.
    Cutting edge: Flush.

    Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access.

    The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

    PTDLIN7291

    Learn More
  9. Lindstrom Supreme Long Snipe Nose Smooth Jaw Pliers 132mm

    SKU: PTDLIN7890

    List Price:  

    £70.45

    Our Price:  

    £42.06

    Inc VAT:  

    £50.47

    Lindstrom 7890 Supreme Flat Nose Pliers are produced from high performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved.

    The smooth jaws minimise the risk of damage and scratching surfaces.

    Length (A): 132mm (5.2 in).
    Jaw length (B): 32mm (1.26 in).
    Head width (C): 9mm (0.35 in).
    Head depth (D): 6mm (0.24 in).
    Tip width (E): 1.2mm (0.05 in).
    Tip depth (F): 0.8mm (0.03 in).

    PTDLIN7890

    Learn More
  10. Knipex Electronic Oblique End Cutting Nippers 120mm

    SKU: PTDKPX6432120

    List Price:  

    £75.06

    Our Price:  

    £35.59

    Inc VAT:  

    £42.71

    These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics.

    There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand.

    Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.

    Length: 120mm.
    End diagonal cutter with small bevel - 15 .

    PTDKPX6432120

    Learn More
  11. Knipex Electronic Diagonal End Cutting Nippers Short Head 115mm

    SKU: PTDKPX6442115

    List Price:  

    £73.64

    Our Price:  

    £34.92

    Inc VAT:  

    £41.90

    These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics.

    There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand.

    Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.

    Length: 115mm.
    End oblique cutter, short head with small bevel 27 .

    PTDKPX6442115

    Learn More
  12. Knipex Electronic Diagonal Cut Pliers Extra Slim PVC Grip 125mm

    SKU: PTDKPX7502125

    List Price:  

    £64.90

    Our Price:  

    £31.17

    Inc VAT:  

    £37.40

    The Knipex 75 02 125 extra slim diagonal cutters are constructed from solid style forged top quality steel with precision non-slip tips for added strength and durability. With high quality material and precise workmanship for long service life. Clean cutting at cutting edge tips for hard or soft wire or thin copper wires. With narrow head style for use in confined areas.

    Like most of the Knipex range of pliers, all components have oil hardened edges and hardened electric steel forged to approximately 64 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have a hardened head and plastic PVC coated cushion grip handles for added durability and comfort.

    Length: 125mm.
    Cutting Capacity: Piano: 0.4mm, Hard: 0.6mm, Medium: 1.0mm, Soft: 0.2-1.3mm.

    PTDKPX7502125

    Learn More
  13. Knipex ESD Electronics Diagonal Cutters - Round Head Small Bevel 115mm

    SKU: PTDKPX7702ESD

    List Price:  

    £64.14

    Our Price:  

    £30.79

    Inc VAT:  

    £36.95

    Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC.

    Cutting Capacity:

    77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm.

    77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.

    77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

    Knipex 77 02 115 ESD Electronic diagonal cutter with a round head and small bevel. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    ESD versions discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.

    77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm.

    PTDKPX7702ESD

    Learn More
  14. Knipex Electronic Diagonal Cut Pliers - Round Bevelled 115mm

    SKU: PTDKPX7712115

    List Price:  

    £72.40

    Our Price:  

    £34.32

    Inc VAT:  

    £41.18

    The Knipex 77 12 Electronic diagonal cutter are a top quality precision cutters for ultra fine cutting work in electronics and fine mechanics. Has around head, bevelled with wire clamp and round head, NON-bevelled. They have precision shaped tips which are ideal for cutting close sitting wire, soft wire up to 1.6mm to hard wire up to 0.5mm diameter.

    These Knipex electronic cutters are jointed with a stainless steel rivet for added strength and easy movement and have cutting edges additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth play-free joint with stainless steel rivet movement for minimum operator fatigue. The handles are coated with soft plastic for comfort and a return spring built into the handle.

    This model has a precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. These pliers are made from special tool steel which is oil hardened for added strength and durability. With polished heads.

    Length 115mm.
    Cutting Capacity: Hard: 0.6mm, Medium: 1.2mm, Soft: 0.2-1.6mm.

    PTDKPX7712115

    Learn More
  15. Knipex Electronic Diagonal Cut Pliers - Round Non Bevelled 115mm

    SKU: PTDKPX7722115

    List Price:  

    £63.40

    Our Price:  

    £30.44

    Inc VAT:  

    £36.53

    The Knipex 77 22 Series electronic diagonal cutter with a round head, NON - Bevelled are a top quality precision pliers for ultra fine cutting work in electronics and fine mechanics. The non-bevelled 77 22 115 have precision shaped tips which are ideal for cutting close sitting wire, soft wire up to 1.6mm to hard wire up to 0.5mm diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement and have cutting edges additionally induction hardened for durability and a longer life. These pliers have an extremely smooth play-free joint with stainless steel rivet movement for minimum operator fatigue. The handles are coated with soft plastic for comfort and a return spring built into the handle.

    Precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. These pliers are made from special tool steel which is oil hardened for added strength and durability. With polished heads.

    Length: 115mm.
    Cutting Capacity: Medium: 1.0mm, Soft: 0.2-1.3mm.

    PTDKPX7722115

    Learn More
No more product
Electronic Cutters & Nipper Pliers
© 2020 Power Tools Direct Online Ltd
VAT Number: 100 5143 84