Insulated Wire Stripping Pliers

IRWIN Vise-Grip VDE wire strippers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability.

Machined jaws provide maxium grip strength.

They are fully TV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts.

Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue.

Will strip cable up to 6 mm in diameter.

Length: 150mm (6 in)

PTDVIS10505871

These Knipex 13 46 Series VDE Dismantling Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. For stripping all types of round sheathed and damp-proof installation cables (e.g. NYM cable), without damage, thanks to circular cutting edge with depth limiter.

The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. Cutting edges are additionally induction hardened to approx. 61 HRC for high wear resistance. The slim head design and optimally angled cable sheath cutter for simplified access especially into deep mounted junction boxes.

It also features a side cutter for cutting and trimming conductors, wires, small screws and nails. They are 30% lighter than comparable pliers. Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm

Specification:

Cable Stripping : 8-13mm
Stripping Capacity: 0.75 - 1.5/2.5m
Wire Capacity : Medium-Hard 3.2mm, Hard 2.2mm
Length: 165mm

PTDKPX1346165

The Knipex 13-6 Series StriX Insulation Stripper with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from high-grade tool steel that has been forged and oil-hardened, multiple times. Chrome plated finish. The knurled screw and lock nut provide easy adjustment to the required diameter of solid or stranded wire. Also fitted with a shear blade for cutting copper cable up to 15mm (5 x 2.5mm) and a bolted joint for precise operation with zero backlash. The pliers have a slim design for easy access.

Ideal for single, multiple and fine stranded conductors with plastic or rubber insulation, max 5.0mm or resp. 10mm cable cross section. Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11mm and 16mm).

Specification

Stripping Capacities: Diameter: 5mm/10mm, AWG: 7
Length: 180mm

PTDKPX1366180

The Knipex 11 06 Series VDE Insulation Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from special tool steel, forged, oil-hardened. Chrome plated finish. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation up to 5.0mm dia. or 10mm cable cross-section.

Specification

Stripping Capacity: Diameter: 5mm/10mm
AWG: 7
Length: 160mm

PTDKPX1106160

These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers.

With 6 functions:

-Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material.

-Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.

-Stripping holes for conductors of 0.75 - 1.5mm and 2.5mm

-Crimp die for wire-end ferrules 0.5 - 2.5mm

-Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm / dia. 15mm

-Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected

1 x Knipex VDE Multifunctional Installation Pliers 200mm

PTDKPX1386200

These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers.

With 6 functions:

-Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material.

-Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.

-Stripping holes for conductors of 0.75 - 1.5mm and 2.5mm

-Crimp die for wire-end ferrules 0.5 - 2.5mm

-Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm / dia. 15mm

-Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected

These Knipex VDE Multifunctional Installation Pliers have an opening spring integrated in to the joint. The activated locking lever keeps the cutting edges closed while other functions remain active.

The intelligent latching mechanism enables you to grip without opening the pliers. The cutting edge remains closed and protected.

PTDKPX1396200

These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers.

With 6 functions:

-Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material.

-Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.

-Stripping holes for conductors of 0.75 - 1.5mm and 2.5mm

-Crimp die for wire-end ferrules 0.5 - 2.5mm

-Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm / dia. 15mm

-Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected

PTDGRPKPX1386200

These Faithfull VDE wire strippers are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to EN 60900:2012. All Faithfull VDE rated tools can safely be used when working on live electrical wires at voltages of up to 1,000 volts AC.

Designed for removing insulation on solid or stranded wires without damaging the core. A pre-set adjustment controls the jaw closure depth.

Length: 170mm.

PTDFAIPLVDEWS6

The ITL Insulated End Wire Strippers with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working.

In addition, this tool meets the requirements of Category C, which requires it to perform at extreme temperatures of -40C to +70C, making it unique in this category.

These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.

Size: 150mm (6in).

PTDITL00170

The Milwaukee Hand Tools VDE Wire Stripping Pliers have a fully forged, hardened and tempered head with a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. For stripping solid, stranded or finely stranded conductors with standard insulation.

V-shaped cutting edge for wires and strands up to a max. of 5mm or 10mm conductor cross section. Adjustable screw for easy adjustment to the required wire or strand diameter. Fitted with ergonomic handles that have a soft grip for comfortable handling and an automatic opening spring.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

Specification:

Total Length: 160mm
Cutting Capacity: Al & Cu Cable 0.75 - 6mm
Weight: 180g

PTDMHT932464573

Manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are resistant to temperatures from -20 to +70 C making them ideal for use in demanding or hostile environments.

Type: Wire Stripping Plier

Length: 170mm

PTDSTA084010