Insulated Pliers

The Milwaukee Hand Tools VDE Cable Cutter with a fully forged, hardened and tempered head. Precision serrated cutting edge for best grip, smooth and clean cut without any burrs. Only for aluminium and copper cables. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Cable Cutter has the following specification:

Cutting Capacity: Al & Cu Cable 25mm
Overall Length: 210mm

PTDMHT932464563

The Milwaukee Hand Tools VDE Long Nose Pliers have a fully forged, hardened and tempered head with 45 angled, flat-round jaws. Grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. Ideal for holding, gripping, bending and cutting work.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

Specification:

Total Length: 205mm
Cutting Capacity: Hard Wire 2.3mm; Soft Wire 3.9mm
Weight: 200g

PTDMHT932464565

The Milwaukee Hand Tools VDE Diagonal Cutter for cutting hard and soft wires. With a fully forged, hardened and tempered head. Cutting edges inductively hardened to 62 HRC. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Diagonal Cutter has the following specification:

Total Length: 160mm
Cutting Capacity: Hard Wire 2mm; Soft Wire 6mm; Al & Cu Cable 11mm
Weight: 210g

PTDMHT932464567

The Milwaukee Hand Tools VDE Diagonal Cutter for cutting hard and soft wires. With a fully forged, hardened and tempered head. Cutting edges inductively hardened to 62 HRC. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Diagonal Cutter has the following specification:

Total Length: 180mm
Cutting Capacity: Hard Wire: 2.5mm, Soft Wire: 7mm, Al & Cu Cable: 13mm
Weight: 240g

PTDMHT932464568

The Milwaukee Hand Tools VDE Heavy-Duty Diagonal Cutter for cutting hard and soft wires. With a fully forged, hardened and tempered head. Precision cutting edge for piano wire (D2 quality). With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Heavy-Duty Diagonal Cutter has the following specification:

Total Length: 200mm
Cutting Capacity: Piano Wire 2.5mm; Hard Wire 2.8mm; Soft Wire 8mm; Al & Cu Cable 15mm
Weight: 305g

PTDMHT932464570

The Milwaukee Hand Tools VDE Combination Pliers with a fully forged, hardened and tempered head. Cutting edges inductively hardened to 62 HRC. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

These Milwaukee Hand Tools VDE Combination Pliers have the following specification:

Total Length: 180mm
Cutting Capacity: Hard Wire 2.2mm; Soft Wire: 5.2mm; Al & Cu Cable 12mm
Weight: 250g

PTDMHT932464572

The Milwaukee Hand Tools VDE Wire Stripping Pliers have a fully forged, hardened and tempered head with a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. For stripping solid, stranded or finely stranded conductors with standard insulation.

V-shaped cutting edge for wires and strands up to a max. of 5mm or 10mm conductor cross section. Adjustable screw for easy adjustment to the required wire or strand diameter. Fitted with ergonomic handles that have a soft grip for comfortable handling and an automatic opening spring.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

Specification:

Total Length: 160mm
Cutting Capacity: Al & Cu Cable 0.75 - 6mm
Weight: 180g

PTDMHT932464573

The Milwaukee Hand Tools VDE Water Pump Pliers are made of forged chrome vanadium steel with a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. The jaws are additionally induction hardened with self-locking serration for best grip.

It has a curved box joint with wide guide surfaces to withstand highest torque pressures. Curved box joint provides for larger gripping capacity, 40% above ISO standard. The joint is smooth and precise for maximum power transmission with optimum leverage for easy and effortless work.

Fitted with an ergonomic 3-component handle with soft grip for comfortable handling. Finger trap protection for safe work, prevents injuries caused by squeezing. It also features a lanyard hole.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

Specification:

Pipe Capacity: 50mm
Total Length: 240mm

PTDMHT932464574

The Milwaukee Hand Tools VDE Cable Cutter with a fully forged, hardened and tempered head. Precision serrated cutting edge for best grip, smooth and clean cut without any burrs. Only for aluminium and copper cables. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Cable Cutter has the following specification:

Cutting Capacity: Al & Cu Cable: 16mm
Overall Length: 160mm

PTDMHT932464562

The Milwaukee Hand Tools VDE Long Round Nose Pliers have a fully forged, hardened and tempered head. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. Ideal for holding, gripping, bending and cutting work.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

Specification:

Total Length: 205mm
Cutting Capacity: Hard Wire 2.3mm; Soft Wire 3.9mm
Weight: 200g

PTDMHT932464564

The Milwaukee Hand Tools VDE Diagonal Cutter for cutting hard and soft wires. With a fully forged, hardened and tempered head. Cutting edges inductively hardened to 62 HRC. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Diagonal Cutter has the following specification:

Total Length: 145mm
Cutting Capacity: Hard Wire 1.7mm; Soft Wire 5mm; Al & Cu Cable 8mm
Weight: 160g

PTDMHT932464566

The Milwaukee Hand Tools VDE Heavy-Duty Diagonal Cutter for cutting hard and soft wires. With a fully forged, hardened and tempered head. Precision cutting edge for piano wire (D2 quality). With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

This Milwaukee Hand Tools VDE Heavy-Duty Diagonal Cutter has the following specification:

Total Length: 180mm
Cutting Capacity: Piano Wire 2.2mm; Hard Wire 2.6mm; Soft Wire 7mm; Al & Cu Cable 13mm
Weight: 250g

PTDMHT932464569

The Milwaukee Hand Tools VDE Combination Pliers with a fully forged, hardened and tempered head. Cutting edges inductively hardened to 62 HRC. With a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance.

Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.

These Milwaukee Hand Tools VDE Combination Pliers have the following specification:

Total Length: 165mm
Cutting Capacity: Hard Wire 2mm; Soft Wire 4mm; Al & Cu Cable 10mm
Weight: 180g

PTDMHT932464571

The Milwaukee Hand Tools VDE Pliers feature induction hardened cutting edges, with a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work. Fitted with ergonomic handles that have a soft grip for comfortable handling and a good grip.

VDE (DIN EN/IEC 60900) Certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C

The set comprises of:

1 x VDE Diagonal Cutter 160mm

1 x VDE Long Round Nose Pliers 205mm

1 x VDE Combination Pliers 180mm

PTDMHT932464575