Basin Wrenches & Keys

The Faithfull Cranked Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. The cranked head allows access to heaters that are surrounded by insulation or recessed. Manufactured from high-quality steel.

PTDFAIIHSC

The Faithfull Flat Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. Manufactured from high-quality steel.

PTDFAIIHS

Monument Universal Radiator & Valve Key the ends are tapered and therefore self restricting.The three profiles make the tool universal, catering for 3/8 in and 10 mm square section radiator vent plugs and bleed screws.

Bayonet or internal lug type radiator valves allowing for variations in size, shape and position. 12 mm to 14 mm internal hexagon valves tapered allowing for variations in size.

PTDMON2052

The Faithfull Box Type Immersion Heater Spanner provides a firm non-slip grip on immersion heater elements. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied complete with a tommy bar to help provide added leverage when removing over tight elements. Manufactured from high-quality steel.

PTDFAIIHSB

Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts.

Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube and full user instructions.

For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the tap tail. Uses mechanical advantage of the thread of the tap tail to remove stiff nuts.

Monument Stiffnuts Professional Boxed Kit.
1/2-inch. and 3/4-inch. BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. Complete with 3/8-inch. Cordless drill adaptor, 1/2-inch. Square Drive; Extension tube and full instructions.

PTDMON173

The Monument MON2059 2059M multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves.

PTDMON2059

Monument Radiator Stepped Wrench & Ratchet handle.

For use on most radiator valves, nipples, plugs, tank connectors etc.

PTDMON2048

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion.

Supplied as pairs.

2 x Monument MLK06 Manhole Lifting Keys 150mm (6in)

PTDMONMLK06

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion.

Supplied as pairs.

2 x Monument MLK12 Manhole Lifting Keys 304mm (12in)

PTDMONMLK12

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion.

Supplied as pairs.

2 x Monument MLK20 Manhole Cover Lift Keys 508mm (20in)

PTDMONMLK20

The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.

PTDMON339

The Faithfull Crutch Pattern Stopcock Key also has additional 1/2 and 3/4 in square valve fittings. Turning handle has one pointed end for lifting covers.

Length 114cm (44.3/4in).

PTDFAISTOPCOCKU

Monument Three Legged Radiator Valve Key for 1/2, 3/4 and 1in radiator valves.

Made from a brass pressing.

PTDMON2056

The Monument 361T Box Ring Immersion Heater Spanner is made with an octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle.

The one-piece casting enables full transmission of power to the spanner unlike loose tommy bar types. Overall clearance around the spanner is 7/8in (22mm) allowing easier fitting on insulated copper cylinders.

Made in Britain.

PTDMON361

The Faithfull 4-Way Services Utility Meter Key is made from chrome vanadium steel for strength and durability. It features four popular key shapes: square, triangular and two-way.

Suitable for use on radiator taps, gas and electricity meter doors. An essential item for many tradesmen.

PTDFAISUKEY