Basin Tap Wrenches

The Monument GRIP+ 323F Tap Backnut Box Spanner is double-ended for the quick assembly of tap backnuts on basins. Part of the GRIP+ range.

Size: 27 and 32mm.

PTDMON323

Monument Basin Wrench for fitting back nuts and union nuts of pillar and bath taps behind basins, sinks and baths.

Manufactured from strong malleable material, and correctly machined jaws to fit standard back nuts 1/2 and 3/4in BSP.

The offset design allows you to reach behind sinks & baths easily

Overall Length: 260mm

PTDMON327

Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts.

Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube and full user instructions.

For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the tap tail. Uses mechanical advantage of the thread of the tap tail to remove stiff nuts.

Monument Stiffnuts Professional Boxed Kit.
1/2-inch. and 3/4-inch. BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. Complete with 3/8-inch. Cordless drill adaptor, 1/2-inch. Square Drive; Extension tube and full instructions.

PTDMON173

The Monument GRIP+ Adjustable Basin Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.
The teeth on the jaws will grip uneven shapes etc.

The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach.

Correct heat treatment of all components ensures a long life.

Supplied with small and medium jaws.

Size 15 and 22mm, 1/2 and 3/4 in

PTDMON345

Monument Adjustable Fitted 2 Jaw Wrench (DIY) is an adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.

The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate.

Round cross section steel handle with removable tommy bar.

Size: 15 and 22mm (1/2 and 3/4 in).

PTDMON341

Spare jaws to fit all Monument adjustable wrenches.

Monument 351O.

Size medium: 38mm (1 1/2 in).

PTDMON351

Spare jaws to fit all Monument adjustable wrenches.

Monument 352R.

Size: Large 50mm (2 in).

PTDMON352

The Monument 781T DIY telescopic adjustable basin wrench is designed for use when tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.

The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate.

Extends from 25 - 43cm

PTDMON781

Monument GRIP+ Mono Tap Backnut Spanner Set is a set of 3 double-ended tap back nut box spanners for quick assembly of tap backnuts on basins.

Supplied with T-bar.

The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.

PTDMON3240

These Faithfull basin wrenches have adjustable spring action jaws that maintain an automatic grip on pipe fittings. The forged steel jaws turn 180 for greater flexibility. Essential tool for use on compression fittings, copper or polythene, on basins and baths.

1 x Faithfull Adjustable Basin Wrench 25 - 50mm

PTDFAIBWADJL

Bahco Telescopic basin nut wrench with a reversible jaw for accessing nuts on wash basins, bath tubs, sinks or bidets. With 4 adjustment sizes.

Length: 280 to 460mm (telescopic)

Capacity: 10 to 32mm

PTDBAH36332

The Faithfull Basin Wrench 15mm (1/2in) and 22mm (3/4in) is manufactured from malleable cast iron with accurately machined jaws.

Ideal for use in awkward places, eg. backnuts fitted to taps behind sinks or baths.

PTDFAIBW1

These Faithfull basin wrenches have adjustable spring action jaws that maintain an automatic grip on pipe fittings. The forged steel jaws turn 180 for greater flexibility. Essential tool for use on compression fittings, copper or polythene, on basins and baths.

1 x Faithfull Adjustable Basin Wrench 6mm - 25mm

PTDFAIBWADJ

The Monument 4534X GRIP+ T1 is a 27x32mm double-ended nickel plated hexagonal fitting tool. Fits most radiator valves, back nut box spanners, taps, pumps and cabinets. Use with the Monument 323F Tap Back Nut Box spanner. When connected to the box spanner, the Monument 4537G GRIP+ shorty swivel handle or the Monument 345V adjustable basin wrench handle, it extends the reach for easier access.

PTDMON4534

The Monument 4562P GRIP+ is a pair of stepped 8, 9 and 10mm & 11, 12 and 13mm Nickel Plated Hexagonal Fittings. They can be connected to the Monument 3240U and the 4537G GRIP+ shorty swivel handle, extending the reach of the Monument 3240U box spanners, for easier access to Monobloc tap back nuts.

PTDMON4562