Pipe Cutters

The RIDGID 258 Power Pipe Cutter cuts 2 12 - 8in (65-200mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts.

The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21ft (6m) or nipple lengths of pipe is achieved quickly, without abrasive dust, sparks, or open flame.

Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.

No Load Speed: 26-30/min.
Capacity: Schedule 10/40 Steel Pipe: 2.12 - 8in (65-200mm).
Weight: 48kg.

PTDRID17881

The RIDGID Quick-Acting Tube Cutters for Copper feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation.

The X-CEL Knob cuts tubing more quickly and easily with the larger, more ergonomic design and the X-CEL wheel pin makes changing the cutter wheel quicker using the new ball detent design, with no tools needed and no lost clips.

Also available in models for plastic pipe.

RIDGID 31632 Quick-Acting 151 Tube Cutter For Copper

Std. Wheel: E-3469.
Capacity: 6-42mm (1/4 - 1.7/8in).
Weight: 0.56kg.

PTDRID31632

The RIDGID Quick-Acting Tube Cutters for Plastic feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation.

The X-CEL Knob cuts tubing more quickly and easily with its larger, more ergonomic designs. The X-CEL Wheel Pin makes changing the cutter wheel quicker using the new ball detent design, no tools needed and no lost clips.

Also available in models for Copper pipe.

RIDGID 31647 Quick-Acting 152-P Tube Cutter For Plastic

Std. Wheel: E-2155.
Capacity: 10-63mm (1/8 - 2in).
Weight: 0.92kg.

PTDRID31647

The RIDGID Quick-Acting Tube Cutters for Plastic feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation.

The X-CEL Knob cuts tubing more quickly and easily with its larger, more ergonomic designs. The X-CEL Wheel Pin makes changing the cutter wheel quicker using the new ball detent design, no tools needed and no lost clips.

Also available in models for Copper pipe.

RIDGID 31657 Quick-Acting 154-P Tube Cutter For Plastic

Std. Wheel: E-2156.
Capacity: 50-110mm (1.1/2 - 4in).
Weight: 1.72kg.

PTDRID31657

The RIDGID Quick-Acting Tube Cutters for Plastic feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation.

The X-CEL Knob cuts tubing more quickly and easily with its larger, more ergonomic designs. The X-CEL Wheel Pin makes changing the cutter wheel quicker using the new ball detent design, no tools needed and no lost clips.

Also available in models for Copper pipe.

RIDGID 31667 Quick-Acting 156-P Tube Cutter For Plastic

Std. Wheel: E-2157.
Capacity: 110-160mm (1.1/2 - 4in).
Weight: 2.23kg.

PTDRID31667

The RIDGID Heavy-Duty Pipe Cutter has an extra-long shank that protects the adjustment threads and an extra-large handle for quick, easy adjustment. Provides a fast, clean cut on metallic pipes such as copper.

Can be converted to a 3-wheel cutter by replacing rollers with a cutter wheel. Model 3-S has a second handle making two-man leverage possible on large pipe sizes.

RIDGID 2-A Heavy-Duty Pipe Cutter

Capacity: 3-50mm (1/8 - 2in).
Weight: 3.2kg.

PTDRID32820

The RIDGID Heavy-Duty Pipe Cutter has an extra-long shank that protects the adjustment threads and an extra-large handle for quick, easy adjustment. Provides a fast, clean cut on metallic pipes such as copper.

Can be converted to a 3-wheel cutter by replacing rollers with a cutter wheel. Model 3-S has a second handle making two-man leverage possible on large pipe sizes.

RIDGID 2-A Heavy-Duty 3 Wheel Pipe Cutter

Capacity: 3-50mm (1/8 - 2in).
Weight: 3.2kg.

PTDRID32825

The RIDGID Heavy-Duty Pipe Cutter has an extra-long shank that protects the adjustment threads and an extra-large handle for quick, easy adjustment. Provides a fast, clean cut on metallic pipes such as copper.

Can be converted to a 3-wheel cutter by replacing rollers with a cutter wheel. Model 3-S has a second handle making two-man leverage possible on large pipe sizes.

RIDGID 3-S Heavy-Duty Pipe Cutter

Capacity: 25-80mm (1 - 3in).
Weight: 6.9kg.

PTDRID32830

The RIDGID Heavy-Duty 4 Wheel Pipe Cutter is designed for work in areas where a complete turn is impossible. Both models are equipped with four heavy-duty wheels.

The 42-A Model has a short handle for use in confined areas.

The 44-S Model has a second handle, making two-man leverage possible for large pipe sizes.

RIDGID 42-A Heavy-Duty 4 Wheel Pipe Cutter

Capacity: 20-50mm (3/4 - 2in).
Weight: 3.1kg.

PTDRID32870

The RIDGID Heavy-Duty 4 Wheel Pipe Cutter is designed for work in areas where a complete turn is impossible. Both models are equipped with four heavy-duty wheels.

The 42-A Model has a short handle for use in confined areas.

The 44-S Model has a second handle, making two-man leverage possible for large pipe sizes.

RIDGID 44-S Heavy-Duty Pipe Cutter (USA Type)

Capacity: 65-100mm (2.1/2 - 4in).
Weight: 9.1kg.

PTDRID32880

The RIDGID No.246 Soil Pipe Cutter has a ratchet-action handle parallel to pipe, that allows for application in minimum width trenches. Comes complete with hand guard to protect the operators knuckles when cutting.

Cuts 1 1/2 - 6in clay, cast-iron, clay pipe, cement pipe and 4in class 22 water main.

PTDRID32900

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel.

Models 10, 15 and 20 feature a convenient fold-away reamer.

RIDGID Screw Feed No.10 Tubing and Conduit Cutter

Capacity: 3-25mm (1/8 - 1in).
Std. Wheel: F-158.
Weight: 0.40kg.

PTDRID32910

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel.

Models 10, 15 and 20 feature a convenient fold-away reamer.

RIDGID Screw Feed No.10 Heavy-Duty Tubing and Conduit Cutter

Capacity: 3-25mm (1/8 - 1in).
Std. Wheel: E-1240.
Weight: 0.40kg.

PTDRID32915

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel.

Models 10, 15 and 20 feature a convenient fold-away reamer.

RIDGID Screw Feed No.15 Tubing and Conduit Cutter

Capacity: 5-28mm (3/16 - 1.1/8in).
Std. Wheel: F-158.
Weight: 0.68kg.

PTDRID32920

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel.

Models 10, 15 and 20 feature a convenient fold-away reamer.

RIDGID Heavy-Duty Screw Feed No.20 Tubing and Conduit Cutter

Capacity: 16-54mm (5/8 - 2.1/8in)
Std. Wheel: E-1240.
Weight: 0.79kg.

PTDRID32935