Pipe Cutters - Adjustable

High quality adjustable, copper pipe cutter tool that ensures a square even cut.
All parts liable to wear are heat treated.
For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.
It also has an integrated pipe-deburrer.

No.1. Capacity 4 to 28mm.

Spare wheel number MON273.

Monument pipe cutter number 3 is a high quality tool for use by professional and DIY plumbing Installers, heating engineers, and maintenance staff.

This copper pipe cutter assures a square even cut. All parts liable to wear are heat treated.

Capacity: Copper Pipe: 25-82mm, Plastic Pipe: 25-81mm.

Spare wheel number MON273.

PTDMONTC3

Monument Pipe Cutter is a high quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff.

It assures a square even cut and all parts liable to wear are heat-treated.

For sizes: 4mm up to 22mm (copper tube).

PTDMON264

Adjustable Heavy-Duty pipe cutter ideal for cutting steel tubing up to 50mm diameter.

Uses spare wheel FAIPCW6002

PTDFAIPC50

High quality adjustable, copper pipe cutter tool that ensures a square even cut.
All parts liable to wear are heat treated.
For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.
It also has an integrated pipe-deburrer.

No.1. Capacity 4 to 28mm.

Spare wheel number MON273.

Capacity: 4mm-28mm.

PTDMON265

Monument Semi-Automatic Pipe Cutter enables 8-22 mm diameter copper and thicker walled plastic pipes such as those used in Central heating to be cut automatically once it has been sized and tightened.

Thin walled plastic pipes may collapse too easily unless an internal support is given to pipes. After tightening no further adjustment or feeding of the wheel into the tube is required.

Soft copper can also be cut without crushing if the tool is used like a conventional Cutter by feeding the wheel into the tube.
Ideal for use in confined spaces.

Capacity 8 to 22mm.

Replacement wheel number MON301.

PTDMON300

The Faithfull adjustable pipe cutter cuts copper, brass, aluminium and light gauge steel tube. It features a retractable de-burrer and has a steel wheel and rollers.

The Faithfull FAIPC642 has a tube cutting capacity: 6 - 42mm outside diameter.

Uses spare wheel FAIPCW642

PTDFAIPC642

Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube.

Tube Cutting Capacity. 3 to 30mm.

Uses spare wheel FAIPCW6001

PTDFAIPC330

The Faithfull Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube.

Ideal for use in confined spaces.

Tube Cutting Capacity. 3 to 16mm.

Uses spare wheel FAIPCW6001

PTDFAIPC316

Monument Trac Pipe is a stainless steel, bendable corrugated gas pipe with a yellow polyethylene cover.

This cutter has been designed to cut the omegaflex Trac Pipe from DN15/15 mm to DN32/32 mm.

PTDMON295

IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics.

Die-cast body with stove enamelled rust resistant finish.

Capacity: 15 to 45mm (9/16 to 1 3/4 in).

PTDREC20045

High quality adjustable, copper pipe cutter tool that ensures a square even cut.
All parts liable to wear are heat treated.
For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.
It also has an integrated pipe-deburrer.

No.1. Capacity 4 to 28mm.

Spare wheel number MON273.

Capacity: 12 - 43mm.

PTDMON266

The Ridgid 238-P Powered Soil Pipe Cutter cuts cast iron soil pipe quickly and easily in tight spaces. It is designed to cut to to 200mm (8in) soil pipe when driven by an impact driver (minimum 340Nm torque) or 100mm (4in) with the included ratchet.

The 238-P is lightweight and - at only 6.1kg - it is easy to mount in difficult places. It has a compact design and low profile cutter wheels to fit into tight places in both overhead and below ground applications.

The pipe cutter allows two-directional operation to allow scoring of the pipe for a clean cut. A patent pending torque limiter protects the tool from overloading.

Capacity (Ratchet / Impact Driver):

No-Hub Soil Pipe: 32-100mm / 32-200mm.
Clay Pipe: 50-100mm / 50-200mm.
Concrete Pipe: 100mm / 100-150mm.

PTDRID42878

Designed for cutting plastic and metal tubing, this Ridgid cutter is quick-acting with an I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. It also features a fold-away reamer.
Capacity: 6-66mm.

Supplied with spare cutting wheel.

PTDRID31642

Designed for optimised performance on stainless steel tube, the Ridgid 65S cutter has a specially designed cutter wheel, with six individual bearings, which replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube. The cutter has a quick-acting mechanism, which rapidly adjusts to different sized tubing.
An oversized, easy-to-grip knob allows for quick and easy adjustments, and the contoured frame allows for easy alignment while adjusting the cutter to make a cut.
Capacity: 6-65mm.

PTDRID31803

This Ridgid 118 AUTOFEED 2-in-1 Midget Cutter is designed for hard and soft copper, aluminium, brass and plastic tubing. It is ideal for use in restricted spaces on small diameter pipes. It is fitted with a feed assisting spring mechanism for controlled and automatic advance and has strong, lightweight slide and wheel housing.
Capacity: 6-28mm.
Supplied with spare cutting wheel.

PTDRID32573