Plumbing & Heating Consumables

Evo Stik Plumbers Mait, a waterproof non-setting, non-cracking putty for use in sanitary installations. It provides a watertight seal that can be overpainted. Permanent flexibility allows for joint movement.

Supplied in a 750gm tub.

PTDEVOPM750

Evo Stik Plumbers Mait, a waterproof non-setting, non-cracking putty for use in sanitary installations. It provides a watertight seal that can be overpainted. Permanent flexibility allows for joint movement.

Supplied in a 1.5Kg tub.

PTDEVOPM15

Everbuild EVBP16PIPE is a PVC pipe cement is a non-drip, thixotropic solvent based pipe cement and combines a long open time with a rapid rate of bond strength development. Conforms to BS26209.

The Everbuild P16 product is designed specifically for the following applications. Bonding uPVC and ABS non-pressure pipes to themselves and each other, i.e. uPVC soil and ventilating pipes, fittings, and accessories conforming to BS4514; uPVC rainwater piping/goods conforming to BS4576; uPVC underground drainpipes and fittings BS4660; ABS or uPVC waste pipes and fittings conforming to BS55255.

Size 250ml

PTDEVBP16PIPE

P18 GAS LEAK DETECTOR is a specially formulated micro porous foam designed specifically to identify even the smallest, gaseous leak. It is suitable for use with most gases and is compatible with paintwork, metals, wood and most plastics.

This product is designed to be used to trace costly and potentially dangerous gas leaks

*Suitable for most gas types.
*Fast and easy to apply.
*CFC free.
*Directional tube for hard to reach places.

*Detecting leaks in pressurised pipe systems.
*Suitable for use with most gas types including natural and town gas, compressed air, butane, propane, acetylene, chlorine gas, hydrogen and oxygen
Size 400ml

PTDEVBP18GASLEK

Everbuild Central Heating P11 System Cleanser Concentrate will remove commissioning and flux residues from new systems and restore circulation to old systems which suffer from sludge.

Everbuild P11 System Cleanser should also be used when components are replaced or existing systems are extended. This product is compatible with plastic tanks, micro bore and all metals (including aluminium) used in central heating systems. It is very economical as 1 litre will treat a 100 litre system capacity in new and existing central heating systems or extensions to existing systems.

Size : 1 litre.

PTDEVBP11CLEAN1

Formerly PROTEX by Purimachos

EVERBUILD P14 SYSTEM INHIBITOR is a multi-purpose treatment, specifically designed to protect the entire central heating system from scale, sludge and corrosion.

*WRAS Approved formulation.
*BuildCert Performance Standard
*Compatible with all EVERBUILD central heating products.
*Does not contain mineral oil.
*compatible with plastic and fibreglass header tanks and with all metals used in central heating systems which includes iron, copper, steel, brass and aluminium.
*Suitable for microbore systems constructed from plastic pipes.

*New and existing central heating systems.
*Extensions to existing systems.

PTDEVBP14INHIB1

ROCOL STEAMSEAL PJC is an excellent pipe sealant primarily used in plumbing and industrial application for pipes, flanges and face joints. Its graphite and manganese compound provides efficient sealing for ferrous pipework. Hard-setting but flexible to resist vibration, thermal expansion and contraction of pipework.

Joints sealed with STEAMSEAL are easy to break and clean. High pressure sealing capability, up to 193 bar (2800 psi).

Specification

Temperature Range: -20C to 600C

PTDROC30042

Boss Super Green conforms to BS6956 Part 5, 1992.
For use on potable drinking water and both hot and cold water services with pressures up to 7 bar and temperatures up to 200 degrees C.
The compound is ideal for applying to all types of joints on pipework where the quality of the water has to be maintained and the taste unimpared by contact with the compound.

Boss Green is a Water By-laws Scheme approved product.

Size: 400g.

PTDMISBG400

ROCOL FUELSEAL is a high pressure pipe jointing compound for use with fuel oils and petroleum at high pressures and the sealing of threads and face connections. Resists vibration and thermal enivronmental changes

Suitable for petrol, diesel and mineral oils.

PTDROC30051

ROCOL METAL REPAIR Compound is a solvent free, permanent metal repair putty which can be used to repair castings, valve and pump components. Binds to a wide range of substrates: metal, glass, ceramic, concrete, fibreglass and wood. Eliminates the need for welding and brazing. It can be applied underwater.

Specification

Cure Time: 4 Minutes
Full Cure: 1 Hour
Permanent Strength: up to 23MPa
Temperature Range: up to +150C

PTDROC64012

Rocol OILSEAL is a thixotropic liquid which is hard setting to form pressure tight seals. It offers excellent high pressure and temperature performance. It also offers excellent resistance to vibration. Mineral oil, white spirit and petroleum compatible.

Suitable for uses up to 2000 psi and 200C.

PTDROC28032

ROCOL M23660 Gas Tap Lubricant lubricates and seals gas taps and taper plug cocks. Developed in conjunction with cooker and tap manufacturers for taper gas taps operating with 1st, 2nd and 3rd family gases. Suitable for high temperature applications up to 120C. Excellent anti-wear and anti-seize properties.

Meets the requirements of BS5494:1978, service No. 6 (30,000 operations).

PTDROC32020

Evo Stik Plumbers Mait, a waterproof non-setting, non-cracking putty for use in sanitary installations. It provides a watertight seal that can be overpainted. Permanent flexibility allows for joint movement.

PTDGRPEVOPM15

Boss White is well known as a non-poisonous pipe jointing compound which is clean and easy to apply. It acts as a lubricant whilst the joint is being assembled and tightened and does not set hard enabling easy dismantling for subsequent alterations to the pipework.

Boss White conforms to BS6956 Part 5, 1992.
The compound is lead free and incombustible and will not deteriorate.

Suitable for use on compressed air, natural gas, steam and non potable hot and cold water services.

Size: 400g.

PTDMISBW

ROCOL Gasseal Non-Setting Sealant is a non-setting pipe sealant used for metallic threaded joints. Non corrosive to aluminium, brass, copper, low carbon steel and zinc.

Suitable for use with natural gas and LPG pipework. Joints can be assembled and pressure tested immediately. Resists vibration. Compatible with foam forming leak testers.

Independently tested by BSI to BS EN 751-2: 1997 Part 2 Class B.

Specification

Temperature Range: -20 C to + 125C

PTDROC28042