Our website uses cookies to make your browsing experience better. By using our site you agree to our use of cookies. Learn more
Plumbing & Heating Tools

- Ridgid Chain Tong - Double Ended 33-168mm (1-6in) Capacity 3233
SKU: PTDRID92675
List Price:
£520.26
Our Price:
£337.02
Inc VAT:
£404.42
RIDGID Chain Tongs are designed and sized to provide extra leverage for the toughest jobs. All chains are tested to 2/3 of its breaking strength.
Model 3215 is a single-end tong but all other models feature double-end jaw styles which can be reversed.
RIDGID Chain Tong - Double Ended
Total Length: 1,117mm (44in).
Pipe Capacity: 33-168mm (1-6in).
Chain Length: 813mm (32in).
Chain Breaking Load: 9,117.0kg.
Weight: 13kg.PTDRID92675
Learn MoreMonument 83X Tank Connector Fitting Tool 15/22mmSKU: PTDMON83
List Price:
£17.18
Our Price:
£9.17
Inc VAT:
£11.00
Monument 83 tool has been designed to make the job of fitting both 15 & 22mm tank connectors easy.
Traditionally the task of fitting a connector to a domestic cold water tank has been awkward and required 2 pairs of hands or very long arms. The tool engages with the dog drive of the tank connector and can then be used one handed whilst the nut of the tank connector is tightened.
Size: 15 & 22mm.
PTDMON83
Learn MoreMonument 2922M Copperkey Pipe Cleaning Tool 22mmSKU: PTDMON2922
List Price:
£30.85
Our Price:
£16.47
Inc VAT:
£19.76
Monument pipe cleaning tool is the very best and safest way to prepare copper pipe and copper fittings and comes in 15mm and 22mm cutting sizes.
Long-lasting double stemmed brushes clean quickly. Quick thorough tubing prep with patented tungsten carbide abrasive technology, they work 3x faster and last 4x longer than conventional tools.
Patented ratchet handle makes jobs possible in tight spaces. Eliminates the risk of scrapes or flux burns.
Monument MON2922 Copperkey Pipe Cleaning Tool
PTDMON2922
Learn MoreMonument 458N Tap Reseating Tool 1/2 in BS1010SKU: PTDMON458
List Price:
£28.15
Our Price:
£15.02
Inc VAT:
£18.02
Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top.
For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable.
Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.
PTDMON458
Learn MorePriory 400 Tank Cutter for Hand Brace/Drill Stand 125mm (5in)SKU: PTDPRI400
List Price:
£37.74
Our Price:
£22.15
Inc VAT:
£26.58
This tank cutter has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck.
This tank cutter is suitable for use in a hand held brace or drill stand.
The cutting blade is manufactured from heat-treated high-speed steel and the cutter has a high speed steel pilot drill and is suitable for use on most tank materials.Capacity 25 - 125mm (1-5 in) .
Shank. Straight.
Cutter. H.S.S.PTDPRI400
Learn MoreMonument 3024O Abrasive Clean Up Strips (Pack of 10)SKU: PTDMON3024
List Price:
£11.57
Our Price:
£5.13
Inc VAT:
£6.16
Monument Abrasive Clean Up Strips, 180 grit silicone clean up strips of abrasive waterproof open mesh material for a multitude of cleaning jobs such as roughing up pipe, cleaning inside fittings (can be cut into small strips), deburring metal and wooden surfaces.
PTDMON3024
Learn MoreMonument 2915Q Copperkey Pipe Cleaning Tool 15mmSKU: PTDMON2915
List Price:
£23.75
Our Price:
£12.68
Inc VAT:
£15.22
Monument pipe cleaning tool is the very best and safest way to prepare copper pipe and copper fittings and comes in 15mm and 22mm cutting sizes.
Long-lasting double stemmed brushes clean quickly. Quick thorough tubing prep with patented tungsten carbide abrasive technology, they work 3x faster and last 4x longer than conventional tools.
Patented ratchet handle makes jobs possible in tight spaces. Eliminates the risk of scrapes or flux burns.
Monument MON2915 Copperkey Pipe Cleaning Tool.
PTDMON2915
Learn MoreMonument 2036T Olive Puller 15/22mmSKU: PTDMON2036
List Price:
£51.40
Our Price:
£27.43
Inc VAT:
£32.92
The Monument 2036T ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm and 22mm copper pipe.
This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives.
Made in Britain.
PTDMON2036
Learn MoreMonument 3025R Clean & Polish Pads 50 x 250mm (Pack of 6)SKU: PTDMON3025
List Price:
£11.80
Our Price:
£6.30
Inc VAT:
£7.56
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use.
Size: 50 x 250 mm pads, medium grit.
PTDMON3025
Learn MoreMonument 450P D.I.Y. Tap Reseating Tool 1/2in & 3/4inSKU: PTDMON450
List Price:
£18.07
Our Price:
£8.01
Inc VAT:
£9.61
Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps.
Complete with: 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes.
Made in Britain.
PTDMON450
Learn MoreIrwin Record 232.1/2 Chain Pipe Wrench 8-76mmSKU: PTDREC23212
List Price:
£294.24
Our Price:
£162.29
Inc VAT:
£194.75
IRWIN Record Chain Wrenchs are robust and provide maximum grip on round or irregular shapes. Not for use on copper pipe or non-ferrous pipes. Easy to use, you simply loop the chain around the pipe, lock it, and the jaws will grip in the direction of turn.
Great for use in confined spaces, trenches, or close to walls. With its double ended reversible replacement jaws and a high breaking strain tensile steel chain with fast positive lock.
The cast tubing handle combining strength and lightness.
Note: Not for use on copper pipe or any non ferrous pipes.
IRWIN Record T23212 Chain Pipe Wrench has the following specification:
Overall Length: 546mm (21.1/2in).
Capacity: 8-76mm (5/16-3in).PTDREC23212
Learn More© 2021 Power Tools Direct Online LtdIrwin Record 234C Chain Pipe Wrench 25-200mmSKU: PTDREC234C
List Price:
£792.04
Our Price:
£426.58
Inc VAT:
£511.90
IRWIN Record Chain Wrenchs are robust and provide maximum grip on round or irregular shapes. Not for use on copper pipe or non-ferrous pipes. Easy to use, you simply loop the chain around the pipe, lock it, and the jaws will grip in the direction of turn.
Great for use in confined spaces, trenches, or close to walls. With its double ended reversible replacement jaws and a high breaking strain tensile steel chain with fast positive lock.
The cast tubing handle combining strength and lightness.
Note: Not for use on copper pipe or any non ferrous pipes.
The Record T234C Chain Pipe Wrench has the following specification:
Overall Length: 1300mm (51in).
Capacity: 25-200mm (1-8in).PTDREC234C
Learn MoreMonument 454B Tap Reseating Tool 1/2in & 3/4in BS5412SKU: PTDMON454
List Price:
£33.83
Our Price:
£18.05
Inc VAT:
£21.66
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework.
Parallel bushes for use where the internal thread will not allow the entry of tapered cones.
For taps with recessed threads in body, use parallel bush series.
Cutters are case hardened, feedscrew allows fine adjustment to the cutter.
All parts are interchangeable.Fits 1/2in and 3/4in BS5412 bevelled seats.
Complete with 17, 20 mm (11/16 in, 13/16 in) Bevelled Cutters.
One double bush.
PTDMON454
Learn MoreMonument 2030B Olive Cutting Tool 15mmSKU: PTDMON2030
List Price:
£58.69
Our Price:
£31.32
Inc VAT:
£37.58
The Monument olive cutting tool is designed to remove an olive from copper pipe without damaging the pipe and without producing swarf/debris.
NOTE: DO NOT attempt to remove stainless steel olives with this tool.
Made in Britain.
The Monument 2030B Olive Removing Tool is suitable for the removal of 15mm olives only.
PTDMON2030
Learn MoreAntex Replacement Heads for Pipemaster Pro RangeSKU: PTDGRPANTPM8
From:
£12.05
Inc VAT:
£14.46
Interchangeable heads for Pipemasters irons.
PTDGRPANTPM8
Learn MorePlumbing & Heating Tools
VAT Number: 100 5143 84