- Faithfull No.10 Rebate Plane
The Faithfull traditional No.10 bench rebate plane designed for cleaning up wide rebates and shoulders or large joints and for general bench joinery, where a full width cutter is required. Suitable for use on both hard and soft woods.
The high quality grey cast iron body provides both strength and stability, with a precision ground base and sides for flatness and squareness, a machined blade seating eliminates movement and blade judder. The lever cap is fitted with a brass locking screw securing the blade assembly and enables easy release for sharpening. Hardwood handle and knob for user comfort, all parts are precision machined for accurate adjustment.
Cutter Width: 50mm (2in).
Overall Length: 330mm (13in).
PTDFAIPLANE10Learn MoreStanley No.78 Duplex Rebate Plane
This rebate plane is made from fine grey iron with all working surfaces accurately machined for precise results. Two cutter positions for regular and bull nose work. The cutter is adjustable for depth of cut in the rear position. To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied. A cutting spur is also provided for cross grain work.
Cutter Width: 38mm (1.1/2in).
Length: 250mm (10in).
PTDSTA112078Learn MoreFaithfull Shoulder Bullnose Rebate Plane in Wooden Box
The Faithfull Shoulder Bullnose Rebate Plane is a versatile, 3-in-1 low angle plane, combining the functions of: a shoulder plane with the front extension fitted; a bullnose plane using the small nose section; or a chisel plane with the nose removed. The full width blade also allows use as a rebate plane and is easy to set using the knurled adjustment screw.
Presented in a hinged wooden storage box.
PTDFAIPLANESHOULearn MoreFaithfull No.778 Rebate Plane
The Faithfull 778 plane is designed to cut rebates up to 38mm (11/2in) and is guided by an adjustable fence supported on two guide rods. The rods can be pushed through which allows the fence to be used on either side of the plane. A twin position cutter enhances the versatility of this plane.
The plane features a quality cast iron body with accurately ground base, two position cutter for rebate and bull nose work, a double sided adjustable fence, a spur for cross grain cutting and is supplied with an accurate depth stop.
With the cutter in the centre position, the plane can be used for cutting rebates, and has a fine screw adjuster for precise control of the depth of cut.
With the cutter moved to the front position, the plane can also be used for cutting into corners (bullnose work).
Presented in a hinged wooden box.
Cutter Width: 38mm.
Overall Length: 255mm.
PTDFAIPLANE778Learn MoreIrwin Record No.778 Rebate Plane
The IRWIN Record 778 rebate plane has two cutter positions, one for normal rebating work and a forward position for planing into corners and difficult positions.
The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate.
The cast iron body has an accurately ground base.
Five thread depth adjusting screws for precision control of shaving thickness.
Cutter Width: 38mm (1.1/2 in).
Length: 215mm (8.1/2 in).
PTDREC778Learn MoreRebate Planes
VAT Number: 100 5143 84