General Hardware

Forge Steel Corner Braces for joining two pieces of wood at right angles and for supporting cupboard joints.

Zinc plated and pre-drilled for fixing.

Fitting Instructions: Use to support joints in cupboard assembly.

PTDGRPFGEBRACBR25

Forge Steel Corner Plates for joining and supporting pieces of timber.

Zinc plated and pre-drilled for fixing.

Fitting Instructions: Use to support joints in cupboard assembly.

PTDGRPFGEBRACPL50

Forge traditionally shaped Handrail Bracket for domestic use.

Supplied with all fixings.

Fitting Instructions:
1. Measure up from the lowest step and mark a height at 100 to 120cm. Repeat at the top step.
2. Use a chalk line to create a straight line accross these two points.
3. Measure points equally along this line no further than 120cm apart.
4. Screw brackets to the wall using fixings suitable for the surface.

PTDGRPFGEBRAKHRAL

Forge Steel Mending Plates for joining two pieces of timber or reparing broken timber such as in fencing.

Zinc plated and pre-drilled for fixing.

Fitting Instructions: Use to support joints in cupboard assembly.

PTDGRPFGEBRAMND75

This Forge traditional silent Cabin Hook is suitable for heavy-duty applications. The tight fitting hook and eye prevents movement hence the silent application. Made from solid brass and supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Place cabin hook in the desired position, and mark fixing holes with a pencil.
2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.
3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.

PTDGRPFGECABSILBR4

Forge black powder coated light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Repostion hinge, mark and drill fixing holes and screw into postion.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

PTDGRPFGEHNGBTBL75

Forge light pattern steel fixed Pin Butt Hinges in traditional pattern.

Supplied with all fixings and fitting instructions.

Pack of 2.

Fitting Instructions:
1. Position hinges on door surface and mark around hinge body using a sharp pencil.
2. Use a chisel to rebate door edge so that hinges sit flush with surface.
3. Reposition hinge, mark and drill fixing holes and screw into position.
4. Line door up with the door frame and mark around the hinge body. Repeat steps 2 & 3 on door frame.

PTDGRPFGEHNGBTBP25

Forge steel Flush Hinges do not require rebating into the door or frame surface and are ideal for lightweight doors or cabinet construction.

Supplied with all fixings.

Pack of 2.

Fitting Instructions:
1. Screw to Door surface using fixings provided.
2. Support the door weight with spacers at a suitable height and screw hinges into door frame.

PTDGRPFGEHNGFLBP40

Forge Loose Pin Butt Hinges for general purpose use on internal doors or cabinets. Fitted with a removeable pin for easy door removal and refitting.

Supplied with all fixings.

Pack of 2.

PTDGRPFGEHNGLPBP75

Forge cranked Stormproof Hinges, usually used in the construction of windows where the sash closes over the frame to prevent draft and water ingress.

Supplied with all fixings.

Pack of 2.

Finish: Brass Plated

PTDGRPFGEHNGSPBP50

Forge Tee Hinges in black japanned finish.

Manufactured from steel and black epoxy coated for corrosion resistance.

Supplied as a pack of 2 with fixing screws.

PTDGRPFGEHNGTBL100

Forge Tee Hinges, manufactured from steel and zinc plated for corrosion resistance. For surface fitting to light to medium doors and gates.
Supplied in pairs with fixing screws.

PTDGRPFGEHNGTZP200

A pack of 5 Forge Cupboard Knobs in traditional Victorian style. Includes fixing bolts and fitting instructions.

Fitting Instructions:
1. In desired position drill 4mm hole through cupboard door.
2. Insert fixing bolt through hole and fasten knob by tightening screw.

PTDGRPFGEKNOBVBR25

Forge London Shelf Brackets for light to medium-duty shelving applications.

PTDGRPGRPFGELONWH34

The Forge Padlock Bolts or Brenton Bolts are used to secure gates, or doors which require locking with a padlock. The Forge padlock bolt is designed for heavy-duty use with a strong steel bolt and locking collar. It comes in a variety of sizes and are either black powder coated or galvanised.

Supplied with fixings for screwing into position and also bolt through fixings for additional security.

Fitting Instructions:
1. Position Padlock bolt in the desired position and mark the square fixing holes with a pencil.
2. Drill holes using a 6mm drillbit and use the bolts provided to fasten in place.
3. Position the keep and ensure that the bolt moves freely through the hole.

PTDGRPFGEPBLTGAL4