39 items

Hardware & Fixings

Hardware & Fixings
View as Grid List

39 items

Set Ascending Direction Set Descending Direction
  1. Bondloc B222 Screwlock Low Strength Threadlocker 10ml

    SKU: PTDBONB22210

    List Price:  

    £6.32

    Our Price:  

    £2.88

    Inc VAT:  

    £3.46

    Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222s Anaerobic nature allows it to cure only when confined between metal parts.

    Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc.

    Specifications:

    Resin: Dimethacrylate
    Colour: Purple White tint
    Cure speed with Activator: <15 mins at 20C
    Cure speed without Activator: 15 minutes
    Viscosity- Brookfield Sp3 at 20rpm: 1200 cps (thixo), Sp3 at 20rpm: 5000cps
    Gap Fill/Max Threadform: 0.5mm/M36
    Flash Point: >100C
    Shelf Life: 12 months at 20C
    Specific Gravity: 1.06

    Cured performance:

    Full Cure Time: 12 hours at 20C
    Typical Strength: ISO 10964: 6Nm M10s
    Range of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 Nm
    DIN 54454 Breakloose: 10Nm max 20Nm
    DIN 54454 Prevailing: 6Nm up to 20Nm

    Bondloc Screwlock Low Strength Threadlocker

    Size: 10ml.

    PTDBONB22210

    Learn More
  2. Bondloc B222 Screwlock Low Strength Threadlocker 50ml

    SKU: PTDBONB22250

    List Price:  

    £26.72

    Our Price:  

    £12.19

    Inc VAT:  

    £14.63

    Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222s Anaerobic nature allows it to cure only when confined between metal parts.

    Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc.

    Specifications:

    Resin: Dimethacrylate
    Colour: Purple White tint
    Cure speed with Activator: <15 mins at 20C
    Cure speed without Activator: 15 minutes
    Viscosity- Brookfield Sp3 at 20rpm: 1200 cps (thixo), Sp3 at 20rpm: 5000cps
    Gap Fill/Max Threadform: 0.5mm/M36
    Flash Point: >100C
    Shelf Life: 12 months at 20C
    Specific Gravity: 1.06

    Cured performance:

    Full Cure Time: 12 hours at 20C
    Typical Strength: ISO 10964: 6Nm M10s
    Range of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 Nm
    DIN 54454 Breakloose: 10Nm max 20Nm
    DIN 54454 Prevailing: 6Nm up to 20Nm

    Bondloc Screwlock Low Strength Threadlocker

    Size: 50ml.

    PTDBONB22250

    Learn More
  3. Bondloc B243 Nutlock Medium Strength Threadlocker 10ml

    SKU: PTDBONB24310

    List Price:  

    £6.32

    Our Price:  

    £2.88

    Inc VAT:  

    £3.46

    Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc.

    Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance.

    Specifications:

    Resin: Mod Methacrylate
    Colour: Blue Thixotropic
    Cure speed: <15 mins at 20C
    Viscosity: 1200-1800 thixotropic
    Gap fill: 0.1mm
    Flash Point: >85C
    Shelf life: 12 months at 20C
    Specific gravity: 1.04
    Max. Operating Temperature: -53C to + 150C

    Cured Performance:

    Full Cure Time: 24 hours
    Typical Breakaway Strength: 12 N/mm
    Typical Prevailing Strength: 8-10N/mm

    Bondloc Nutlock Medium Strength Threadlocker

    Size: 10ml.

    PTDBONB24310

    Learn More
  4. Bondloc B243 Nutlock Medium Strength Threadlocker 50ml

    SKU: PTDBONB24350

    List Price:  

    £26.92

    Our Price:  

    £12.28

    Inc VAT:  

    £14.74

    Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc.

    Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance.

    Specifications:

    Resin: Mod Methacrylate
    Colour: Blue Thixotropic
    Cure speed: <15 mins at 20C
    Viscosity: 1200-1800 thixotropic
    Gap fill: 0.1mm
    Flash Point: >85C
    Shelf life: 12 months at 20C
    Specific gravity: 1.04
    Max. Operating Temperature: -53C to + 150C

    Cured Performance:

    Full Cure Time: 24 hours
    Typical Breakaway Strength: 12 N/mm
    Typical Prevailing Strength: 8-10N/mm

    Bondloc Nutlock Medium Strength Threadlocker

    Size: 50ml.

    PTDBONB24350

    Learn More
  5. Bondloc B270 Studlock High Strength Threadlocker 10ml

    SKU: PTDBONB27010

    List Price:  

    £6.32

    Our Price:  

    £2.88

    Inc VAT:  

    £3.46

    Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases.

    It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses.

    Specifications:

    Resin: Dimethacrylate
    Colour: Green
    Fixture Speed No Activator: 10 min.
    Fixture Speed With Activator: 5 min.
    Viscosity: 500 cps
    Gap fill: 0.25mm
    Flash Point: >100C
    Shelf Life: minimum 12 month
    Specific Gravity: 1.06.
    Max Operating Temperature: -55C to +180C

    Cured Performance:

    Full Cure Time: 12 hours.
    Cure Time with good % of final strength: 2 hours
    Typical Breakaway Strength DIN : 40 Nm (25/55)
    Typical Prevailing Strength DIN : 55 Nm (45/70)
    Typical Breakaway ISO 10964: 26 Nm (16/36)
    Typical Prevailing ISO 10964: 36 Nm (22/50)

    Bondloc Studlock High Strength Threadlocker

    Size: 10ml.

    PTDBONB27010

    Learn More
  6. Bondloc B270 Studlock High Strength Threadlocker 50ml

    SKU: PTDBONB27050

    List Price:  

    £26.92

    Our Price:  

    £12.28

    Inc VAT:  

    £14.74

    Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases.

    It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses.

    Specifications:

    Resin: Dimethacrylate
    Colour: Green
    Fixture Speed No Activator: 10 min.
    Fixture Speed With Activator: 5 min.
    Viscosity: 500 cps
    Gap fill: 0.25mm
    Flash Point: >100C
    Shelf Life: minimum 12 month
    Specific Gravity: 1.06.
    Max Operating Temperature: -55C to +180C

    Cured Performance:

    Full Cure Time: 12 hours.
    Cure Time with good % of final strength: 2 hours
    Typical Breakaway Strength DIN : 40 Nm (25/55)
    Typical Prevailing Strength DIN : 55 Nm (45/70)
    Typical Breakaway ISO 10964: 26 Nm (16/36)
    Typical Prevailing ISO 10964: 36 Nm (22/50)

    Bondloc Studlock High Strength Threadlocker

    Size: 50ml.

    PTDBONB27050

    Learn More
  7. Bondloc B406 Low Viscosity Cyanoacrylate 20g

    SKU: PTDBONB40620

    List Price:  

    £17.93

    Our Price:  

    £8.17

    Inc VAT:  

    £9.80

    Bondloc B406 is a very Low Viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.

    Liquid Properties:

    Ester base: Ethyl cyanoacrylate
    Appearance: Clear, colourless
    Specific Gravity: 25C 1.06 g/cm
    Shelf life: 12 months unopened
    Viscosity at 25C: 25 - 35 mPas

    Size: 20g

    PTDBONB40620

    Learn More
  8. Bondloc B454 Thixotropic Non-Drip Gel Cyanoacrylate 20g

    SKU: PTDBONB45420

    List Price:  

    £21.00

    Our Price:  

    £9.58

    Inc VAT:  

    £11.50

    Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.

    Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of Superglues. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation.

    Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding.

    Liquid Properties:

    Ester base: Ethyl cyanoacrylate
    Appearance: Clear, colourless
    Specific Gravity: 25C 1.1 g/cm
    Shelf life: 12 months unopened
    Viscosity at 25C: Gel

    Size: 20g

    PTDBONB45420

    Learn More
  9. Bondloc B480 Black Rubber Toughened Cyanoacrylate 20g

    SKU: PTDBONB48020

    List Price:  

    £20.64

    Our Price:  

    £9.41

    Inc VAT:  

    £11.29

    Bondloc B480 is a black rubber toughened Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.

    Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of Superglues. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation.

    Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding.

    Liquid Properties:

    Ester base: Ethyl cyanoacrylate
    Appearance: Black Opaque Liquid
    Specific Gravity: 25C 1.06 g/cm
    Shelf life: 6 months unopened
    Viscosity at 25C: 350 - 450 mPas

    Size: 20g

    PTDBONB48020

    Learn More
  10. Bondloc B518 Flexible Gasket Sealant 50ml

    SKU: PTDBONB51850

    List Price:  

    £17.44

    Our Price:  

    £7.95

    Inc VAT:  

    £9.54

    Bondloc Gasket Seal Type B518 is a Red, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal.

    Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Use B518 for dressing gaskets, spacers etc.

    Specifications:

    Resin: Modified Urethane Acrylate.
    Colour: Red Paste.
    Fixture Speed No Activator: Up to 12 hours.
    Fixture Speed With Activator: <2 hours.
    Viscosity: >3,500,000 cps.
    Gap fill: 0.5 mm.
    Flash point: >100C.
    Shelf life: 12 months at 20C.
    Specific gravity: 1.13.
    Max operating temp: -55C to + 150C.

    Cured Performance:

    Full Cure Time: 12 hours.
    Tensile strength: 8 N/mm(2).
    Static Shear strength: 12.5 N/mm(2).

    Size: 50ml.

    PTDBONB51850

    Learn More
  11. Bondloc B542 Hydraulic Seal and Locker 10ml

    SKU: PTDBONB54210

    List Price:  

    £6.32

    Our Price:  

    £2.88

    Inc VAT:  

    £3.46

    Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines.

    Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.

    Specifications:

    Resin: Dimethacrylate.
    Colour: Brown.
    Fixture Speed No Activator: 10 - 20 mins.
    Fixture Speed With Activator: <5 mins.
    Spindle 2 at 2.5 rpm: 1000 to 2750 cps.
    Spindle 2 at 20rpm: 400 to 800 cps.
    Gap fill: 0.05mm to 0.25 mm.
    Flash point: >100C.
    Shelf life: 2 Years at 20C.
    Specific gravity: 1.06.
    Max operating temp: -55C to + 150C.

    Cured Performance:

    Full Cure Time: 12 hours.
    Typical breakway ISO 10964: 15 N.m.
    Typical prevailing ISO 10964: >8 N.m.
    DIN 10964 Breakloose: 24 N.m.
    DIN 10964 Prevailing: 15 to 35 N.m.
    Typical Break and Prevailing: 20N.m/15N.m.

    Bondloc Hydraulic Seal Pneumatic Fittings.

    Size: 10ml.

    PTDBONB54210

    Learn More
  12. Bondloc B572 Pipe Seal Slow Cure 50ml

    SKU: PTDBONB57250

    List Price:  

    £17.44

    Our Price:  

    £7.95

    Inc VAT:  

    £9.54

    Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate.

    Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints.

    Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc.

    Specifications:

    Resin: Dimethacrylate.
    Colour: White paste.
    Cure speed with activator: Not recommended.
    Cure speed Without Activator: up to 60 hours.
    Viscosity Brookfield Sp3 at 20rpm: 20,000cps.
    Gap fill / Max threadform: 0.4 mm / M36.
    Flash Point: >85C.
    Shelf Life: 36 months at 20C.
    Specific Gravity: 1.25.
    Max Operating Temperature: -55C to + 150C.

    Cured Performance:

    Full Cure Time: 60 hours.
    Typical breakaway strength: 6 N.m.
    Typical prevailing strength: 2 N.m.

    Size: 50ml.

    PTDBONB57250

    Learn More
  13. Bondloc B574 Instant Gasket Maker 50ml

    SKU: PTDBONB57450

    List Price:  

    £17.44

    Our Price:  

    £7.95

    Inc VAT:  

    £9.54

    Bondloc B574 is an Instant Gasket material that forms in place, making almost any size and shape, replacing paper, cork etc. It eliminates relaxation and on loads loss. The assembled parts are usually suitable for immediate Low Pressure ( 6 bar) service and once cured can resist 350 Bar Pressure depending on gap size.

    Suitable for all formed in place applications such as gear box sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing, bearing gaps, outer housings, crank case and sump assemblies and flange pipe fittings.

    Specifications:

    Resin: Dimethacrylate.
    Colour: Orange paste.
    Cure speed with Activator: 10 mins.
    Cure speed without Activator: 15-30 mins.
    Viscosity - Brookfield Sp3 at 20rpm: 50,000cps.
    Gap Fill/Max Threadform: 0.5mm/M36.
    Flash Point: >100C.
    Shelf Life: 12 months at 20C.
    Specific Gravity: 1.10.
    Max operating temperature: -55C to 150C.

    Cured Performance:

    Full Cure Time: 24 hours at 20C.
    Breakloose Strength: 8N.m.
    Static Shear Strength: 10N.m.

    Size: 50ml.

    PTDBONB57450

    Learn More
  14. Bondloc B577 Pipe Seal with Teflon 50ml

    SKU: PTDBONB57750

    List Price:  

    £18.08

    Our Price:  

    £8.25

    Inc VAT:  

    £9.90

    Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.

    Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes.

    Specification:

    Resin: Dimethacrylate.
    Colour: Yellow.
    Cure Speed with Activator: <10 minutes.
    Cure Speed without Activator: <15 mins at 20C.
    Viscosity: >50,000 cps.
    Gap Fill: 0.05mm to 0.4mm.
    Flash Point: >100C.
    Shelf Life: 12 months at 20C.
    Specific Gravity: 1.09.
    Max. Operating Temperature: +150C.

    Cured Performance:

    Full Cure Time: 6-12 hours.
    Typical Breakaway Strength: >6 to <15 N/mm (2).
    Prevailing Torque: >3 to < 9 N/mm (2).
    Static Shear Strength: >5 to <15 N/mm (2).

    Size: 50ml.

    PTDBONB57750

    Learn More
  15. Bondloc B638 High Strength Retainer 10ml

    SKU: PTDBONB63810

    List Price:  

    £6.32

    Our Price:  

    £2.88

    Inc VAT:  

    £3.46

    Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress.

    It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit.

    Specifications:

    Resin: Urethane Acrylate.
    Colour: Green.
    Fixture Speed No Activator: 5 mins.
    Fixture Speed With Activator: <5 mins.
    Viscosity: 2500 cps.
    Gap fill: 0.2mm.
    Flash Point: >85C.
    Shelf Life: 12 months min.
    Specific Gravity: 1.08.
    Max Operating Temperature: -55C to + 150C.

    Cured Performance:

    Full Cure Time: 24 hours.
    Static shear strength: 30 N/mm.

    Bondloc high strength retaining Compound.

    Size: 10ml.

    PTDBONB63810

    Learn More
No more product

A Great Choice in Hardware and Home Security Products


When storing your tools, security for your hardware should be of the utmost importance. Whether you keep the tools in a workshop or a garage, they need to be 100 per cent secure. Power Tools Direct carries a range of home security products such as heavy duty padlocks and chains, allowing you to safely lock away your expensive tools. Your workshop isnt the only thing that needs to be secure - think about your home. Power Tools Direct stocks a wide variety of online security products like security cameras and floodlights that will give you peace of mind whether you are at home or away. For added security think about installing deadlocks on all exterior doors, and window locks on ground floor windows.


Power Tools Direct carries security hardware products from all the leading brands, the majority of which will be shipped directly from the supplier, meaning rock bottom prices for all our customers. Orders placed before 12 noon will be delivered by courier in 1-2 days, and delivery is free on any purchase over a certain amount. If you have any questions about a suitable security system for your home or workshop feel free to give us a call.

© 2021 Power Tools Direct Online Ltd
VAT Number: 100 5143 84