2017 items

Hardware & Fixings

Hardware & Fixings
View as Grid List

2017 items

Set Ascending Direction Set Descending Direction
  1. ForgeFix Annular Ring Shank Nails, Bright Finish Range

    SKU: PTDGRPFORAR20B500

    Rating:
    80 %

    From:  

    £1.70

    Inc VAT:  

    £2.04

    These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood.

    The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

    APPLICATION:
    Used where permanent holding is preferred such as flooring applications.

    PTDGRPFORAR20B500

    Learn More
  2. ForgeFix Clout Nails, Galvanised Range

    SKU: PTDGRPFORC30GB500

    From:  

    £1.13

    Inc VAT:  

    £1.36

    These Forgefix Clout Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing.

    The nails are galvanised for increased resistance to corrosion.
    Suitable for roofing of all types.

    APPLICATION:
    Specifically used when roofing felt is being fitted to either shed or similar types of roofs.

    Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

    PTDGRPFORC30GB500

    Learn More
  3. ForgeFix Cut Clasp Nails, Bright Finish Range

    SKU: PTDGRPFORCC50B500

    From:  

    £2.84

    Inc VAT:  

    £3.41

    These Forgefix Cut Clasp Nails are specially designed for fitting floorboards. They are sometimes knowns as square nails, due to their rectangular shank shape.
    The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

    PTDGRPFORCC50B500

    Learn More
  4. ForgeFix Felt Nails, Galvanised Range

    SKU: PTDGRPFORF13GB500

    From:  

    £1.13

    Inc VAT:  

    £1.36

    These Forgefix Felt Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing.

    The nails are galvanised for increased resistance to corrosion.
    Suitable for roofing of all types.

    APPLICATION:
    Specifically used when roofing felt is being fitted to either shed or similar types of roofs.

    Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

    PTDGRPFORF13GB500

    Learn More
  5. ForgeFix Plasterboard Nails, ZYP Range

    SKU: PTDGRPFORPN30ZYP21

    From:  

    £8.12

    Inc VAT:  

    £9.74

    These Forgefix Plasterboard nails are Zinc Yellow Passivated for corrosion resistance. They have indented shanks and countersunk heads, and can be used widely in many joinery applications.

    APPLICATION:
    The shape of the nail makes them ideal for fixing plasterboard and cladding.

    The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.

    Countersunk heads are designed to fit flush with substrates to leave a smooth surface finish. The twin threads main function is to enable an easy start when driving.

    PTDGRPFORPN30ZYP21

    Learn More
  6. ForgeFix Panel Pins, Bright Finish Range

    SKU: PTDGRPFORPP20B500

    From:  

    £1.13

    Inc VAT:  

    £1.36

    These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.
    The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

    APPLICATION:
    General cross section of joinery applications such as fixing decorative timber mouldings.

    PTDGRPFORPP20B500

    Learn More
  7. ForgeFix Panel Pins, Sheradised Range

    SKU: PTDGRPFORPP25SB500

    From:  

    £2.54

    Inc VAT:  

    £3.05

    These Panel Pins are ideal for lightweight and decorative tasks. For corrosion resistance, the pins are sheradised.

    The shape of the pins helps to reduce splitting in hard or brittle timber.

    APPLICATION:
    General cross section of joinery applications such as fixing decorative timber mouldings.

    Sheradisation is the process of choice for fixings or fasteners that require long-term corrosion resistance. The sheradised finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses into the surface of the fastener or fixing to form a sacrificial corrosion protective Zinc /Iron alloy coating which dramatically increases the nails durability.

    PTDGRPFORPP25SB500

    Learn More
  8. ForgeFix Round Head Nails, Bright Finish Range

    SKU: PTDGRPFORRH25B500

    From:  

    £1.04

    Inc VAT:  

    £1.25

    These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

    APPLICATION:
    These nails are the most popular type of nail, used in many joinery and construction applications.

    PTDGRPFORRH25B500

    Learn More
  9. ForgeFix Round Head Nails, Galvanised Range

    SKU: PTDGRPFORRH40GB500

    From:  

    £1.64

    Inc VAT:  

    £1.97

    These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. They are galvanised for increased durability.
    Available in standard sizes, from 25mm to 150mm.

    APPLICATION:
    These nails are the most popular type of nail, used in many joinery and construction applications.

    Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

    PTDGRPFORRH40GB500

    Learn More
  10. ForgeFix Twist Nails, Sheradised Range

    SKU: PTDGRPFORT30GB500

    From:  

    £1.85

    Inc VAT:  

    £2.22

    These Forgefix Twist Nails are a unique twisted shank nail for attaching metalwork joists, hangers, straps etc. The twisted shank assists in absorbing movement that may occur in construction. They have a sheradised finish for corrosion resistance. This finish is a thermal diffusion process, in which Zinc powder is vaporised and diffuses to the surface of the Twist Nail to form a sacrificial corrosion protective Zinc/Iron alloy coating, thus dramatically increasing the nails durability.

    APPLICATION:
    The Twist Nail is the most popular construction nail used in fixing of joist hangers, restraining straps and Galvanised banding.

    PTDGRPFORT30GB500

    Learn More
  11. ForgeFix Oval Lost Head Nails, Bright Finish Range

    SKU: PTDGRPFOROH25B500

    From:  

    £1.04

    Inc VAT:  

    £1.25

    These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a Bright finish, which is simply the basic raw mild steel material, without any coating or finish.

    APPLICATION:
    General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.

    PTDGRPFOROH25B500

    Learn More
  12. ForgeFix Penny Washers, ZP Range

    SKU: PTDGRPFORPENY6

    From:  

    £0.35

    Inc VAT:  

    £0.42

    These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name Penny Washer due to their similarity in size to an old penny.

    Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face.

    APPLICATION:
    On all manner of bolting applications.
    Can be used with all types of bolts and nuts.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    PTDGRPFORPENY6

    Learn More
  13. ForgeFix Cavity Wall Anchors, ZP Range GRPFORMCA420

    SKU: PTDGRPFORMCA420

    From:  

    £0.89

    Inc VAT:  

    £1.07

    These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage.

    APPLICATION:
    All metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    PTDGRPFORMCA420

    Learn More
  14. ForgeFix Mirror Screws, Chrome Domed Top, ZP Range GRPFORMS34CP

    SKU: PTDGRPFORMS34CP

    From:  

    £1.82

    Inc VAT:  

    £2.18

    These Forgefix Mirror Screws are zinc plated for resistance to corrosion, and have a slotted screw head and a threaded female insert in the head and shank. They have a chrome plated dome with a threaded machine screw type male insert, and screw-in top.
    Often used when fixing mirrors or signage, the single threaded screws will hold firm in wall plugs.

    APPLICATION:
    Suitable for use when fixing mirrors or signage in sanitary and similar locations.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used.

    PTDGRPFORMS34CP

    Learn More
  15. ForgeFix Netting Staples, Galvanised Range

    SKU: PTDGRPFORNS15GB500

    From:  

    £1.13

    Inc VAT:  

    £1.36

    Forgefix Netting Staples are versatile staples with extra sharp points, ensuring quick insertion. They are galvanised for increased durability, as the staples are predominantly used on external applications.

    APPLICATION:
    For fastening all manner of wire and netting.
    Used extensively in the fencing trades.

    Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

    PTDGRPFORNS15GB500

    Learn More
No more product

A Great Choice in Hardware and Home Security Products


When storing your tools, security for your hardware should be of the utmost importance. Whether you keep the tools in a workshop or a garage, they need to be 100 per cent secure. Power Tools Direct carries a range of home security products such as heavy duty padlocks and chains, allowing you to safely lock away your expensive tools. Your workshop isnt the only thing that needs to be secure - think about your home. Power Tools Direct stocks a wide variety of online security products like security cameras and floodlights that will give you peace of mind whether you are at home or away. For added security think about installing deadlocks on all exterior doors, and window locks on ground floor windows.


Power Tools Direct carries security hardware products from all the leading brands, the majority of which will be shipped directly from the supplier, meaning rock bottom prices for all our customers. Orders placed before 12 noon will be delivered by courier in 1-2 days, and delivery is free on any purchase over a certain amount. If you have any questions about a suitable security system for your home or workshop feel free to give us a call.

© 2020 Power Tools Direct Online Ltd
VAT Number: 100 5143 84