Hardware & Fixings

Gunk driveway cleaner removes unsightly oil stains from driveways, garage floors, paths and patios. Can be diluted for use on asphalt and tarmac. It is easy to pour on, brush in and hose off.

PTDGRPGUN830

Gunk driveway cleaner removes unsightly oil stains from driveways, garage floors, paths and patios. Can be diluted for use on asphalt and tarmac. It is easy to pour on, brush in and hose off.

1 litre.

PTDGUN830

Gunk driveway cleaner removes unsightly oil stains from driveways, garage floors, paths and patios. Can be diluted for use on asphalt and tarmac. It is easy to pour on, brush in and hose off.

Size. 2 litre.

PTDGUN832

This Teng Tools Hand Riveter has a heavy-duty steel plate, and its jaw and case are made of a strong, heat-treated steel alloy.
The riveter will take aluminium and steel rivets to produce a permanent mechanical fastener. For a comfortable grip it has PVC handles.

The TENHR14 Hand Riveter has the following specifications:
Aluminium and Steel rivet capacity: 2.4mm, 3mm, 3.2mm, 4mm, 4.8mm and 5mm.
Length: 270 mm (10.1/2 in).

PTDTENHR14

Boxed trade pack of 1000.

Talon wall fixing plugs are designed and manufactured in the UK.

Talon plug fixings are produced from premium grade polymer. The fixing plugs are designed to
expand in two directions. This two way system offers rapid fixing with good pullout resistance.

Special side fin anchors restrict the plugs from spinning during installation.

Specifications
- Brown fixing plugs DIM A = 42 mm DIM B = 7 mm
- Woodscrew size = 10,12 & 14 Recommended drill hole diameter = 7 mm
- Recorded pullout values: (pulling force required to remove fixing)
- Result 1 = 2.8 kN (result 1 obtained from 10 x 2 screw & 7 mm hole)
- Result 2 = 2.9 kN (result 2 obtained from 12 x 2 screw & 7 mm hole)
- Result 3 = 2.2 kN (result 3 obtained from 14 x 2 screw & 8 mm hole)

Results obtained from pulling plugs from a hardened concrete fixing surface. Plug pullout limits will vary depending on the type and density of fixing surface.

PTDTALTRADEBROWN

Boxed trade pack of 1000.

Talon wall fixing plugs are designed and manufactured in the UK.

Talon plug fixings are produced from premium grade polymer. The fixing plugs are designed to
expand in two directions. This two way system offers rapid fixing with good pullout resistance.

Special side fin anchors restrict the plugs from spinning during installation.

Specifications
- Red fixing plugs DIM A = 34 mm DIM B = 5.5 mm
- Woodscrew size = 6,8 & 10 Recommended drill hole diameter = 5.5 mm
- Recorded pullout values: (pulling force required to remove fixing)
- Result 1 = 3.4 kN (result 1 obtained from 6 x 2 screw & 5.5 mm hole)
- Result 2 = 2.55 kN (result 2 obtained from 8 x 2 screw & 5.5 mm hole)
- Result 3 = 3.3 kN (result 3 obtained from 10 x 2 screw & 6 mm hole)
- Results obtained from pulling plugs from a hardened concrete fixing surface. Plug pullout limits will vary depending on the type and density of fixing surface.

Results obtained from pulling plugs from a hardened concrete fixing surface. Plug
pullout limits will vary depending on the type and density of fixing surface.

PTDTALTRADERED

SNAPPIT KIT2 (Anthracite Grey)

Snappit is a rigid pipe finish product that is great for covering, unsightly, visible, copper pipe work. It is the best, mess-free, alternative to painting saving time and improving appearance.

Made from the highest quality grade uPVC

Can be cut to any size allowing you to finish various configurations with perfection

Not only covering pipes but by using our pipe collars you have a seamless join to wall/floor

Fire rated

Kit forms comes inclusive with 2 pipe collars and 2 lengths of snappits

PTDTALACSNAK2

SNAPPIT KIT2 (Black)

Snappit is a rigid pipe finish product that is great for covering, unsightly, visible, copper pipe work. It is the best, mess-free, alternative to painting saving time and improving appearance.

Made from the highest quality grade uPVC

Can be cut to any size allowing you to finish various configurations with perfection

Not only covering pipes but by using our pipe collars you have a seamless join to wall/floor

Fire rated

Kit forms comes inclusive with 2 pipe collars and 2 lengths of snappits

PTDTALACSNBK2

15mm SNAPPIT 200mm (Chrome)

PTDTALACSNC10

22mm SNAPPIT 200mm (Chrome)

PTDTALACSNC2210

SNAPPIT Towel Rail KIT1 (Chrome)

PTDTALACSNCK1

SNAPPIT KIT2 (Chrome Effect)

Snappit is a rigid pipe finish product that is great for covering, unsightly, visible, copper pipe work. It is the best, mess-free, alternative to painting saving time and improving appearance.

Made from the highest quality grade uPVC

Can be cut to any size allowing you to finish various configurations with perfection

Not only covering pipes but by using our pipe collars you have a seamless join to wall/floor

Fire rated

Kit forms comes inclusive with 2 pipe collars and 2 lengths of snappits

PTDTALACSNCK2

15mm SNAPPIT 200mm (White)

PTDTALACSNW10

22mm SNAPPIT 200mm (White)

PTDTALACSNW2210

Double 10mm Pipe Cover Accessories

PTDTALAD10FC2