Hardware & Fixings

Cable Ties - Stainless Steel

Stainless steel cable ties are designed for both internal and external applications, including corrosive conditions.High tensile strength with a high temperature resistance and conforming to BS 7671 standards new 18th edition, which requires wiring systems to be supported by materials not likely to prematurely collapse in the event of a fire.

PTDGRPTIM46152CTSS

Intumescent Fire & Smoke Seals - Multi Pack - White

This multi pack contains full length intumescent strips for four doors. The strip comes supplied with a brush seal and is suitable for fire and smoke doors.

PTDGRPTIM487054

Metolux Metobond 1-1 Epoxy Building Adhesive - Light Grey

Fire & Acoustic Seals Fire Door Foam is a revolutionary Polyurethane Foam designed to seal the gaps between walls and fire door frames.
The product has been extensively tested to achieve 30 and 60 minutes fire resistance in a wide range of construction and building fire stopping applications.
Certifire Certificate https://euntimcostorage.blob.core.windows.net/downloads/Documents/Fire%20Test%20Reports/Fire%20Door%20Foam/Certifire%20Cert

PTDGRPTIM65379

Mitred Shelf Bracket - White

Mitred brackets are a quick and economic way to create shelving. They feature steel reinforcements at the mitred joint of the bracket to give added strength and durability.

PTDGRPTIM712005

Twin Slot Shelf End - White

Shelf ends are made from sheet metal and are designed to clip directly into the wall upright. They provide additional support and a barrier to prevent items from falling from the shelf end. The shelf end can be fixed to the underside of the shelf for added support.

PTDGRPTIM712012

Steel Handrail Bracket - Black

Designed for use on heavy duty fire doors in public buildings. Lubricated ball bearing washers provide a lifetime of smooth door operation making them ideal for use with door closers as they reduce closing friction. Fixings included. ?*Hinge pads must be fitted beneath each hinge leaf when fitting to fire doors in accordance with BS EN 1634. Failure to fit with intumescent pads will negate the fire certification of this product.

PTDGRPTIM712146

Fibre Cement Board Screws - Hex - For Light Section Steel - Exterior - Silver - with BAZ Washer

Used for securing fibre cement profile sheets to timber. Complete with heavy duty EPDM and stainless steel washer to provide a water-tight seal. Also known as a BAZ washer. Exterior corrosion resistant coating to withstand over 1,000 hours salt spray.

PTDGRPTIM731274

Acetoxy Silicone - White

A general purpose, single component silicone which offers a flexible water tight seal to most surfaces including glass, painted surfaces, ceramics, sanitary ware and most non-porous surfaces. For sealing around most types of door and window frames, kitchen units, pipes, sanitary fixtures and duct work. Can also be used for draught proofing.

PTDGRPTIM732079

Acetoxy Silicone - Clear

A general purpose, single component silicone which offers a flexible water tight seal to most surfaces including glass, painted surfaces, ceramics, sanitary ware and most non-porous surfaces. For sealing around most types of door and window frames, kitchen units, pipes, sanitary fixtures and duct work. Can also be used for draught proofing.

PTDGRPTIM732098

Wedge Strips

A rapid light duty hammer-set anchor for attaching sheet metal, plastic or wood to concrete or masonry. NOTE: Not recommened for overhead applications such as suspended ceilings.

PTDGRPTIM745233

A-Frame Safety Sign - Caution Slippery Surface

Light weight, a-frame safety signs with double sided printing, for temporary marking of potential hazards in the workplace or in public areas.

PTDGRPTIM747015

Rivets - Dome Head - Stainless Steel

Ideal for sheet to sheet applications where welding and bolting is not possible. During installation the head forms a secure fixing whilst maintaining an aesthetic and low profile finish. The A2 stainless steel body ensures consistent performance and ultimate resistance to corrosion. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

PTDGRPTIM748023

Rivets - Dome Head - Aluminium

Ideal for sheet to sheet applications where welding and bolting is not possible. During installation the head forms a secure fixing whilst maintaining an aesthetic and low profile finish. The aluminium body ensures consistent performance and an enhanced resistance to corrosion.

PTDGRPTIM748147

Rivets - Flange Head - Aluminium

Ideal for sheet to sheet applications where welding and bolting is not possible. During installation the head forms a secure fixing whilst maintaining an aesthetic and low profile finish. The A2 stainless steel body ensures consistent performance and ultimate resistance to corrosion. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

PTDGRPTIM748264

Self-Adhesive Cover Caps - Trade Pack - White Matt

Provides a discreet, flush and water tight covering. Ideal for screw heads, unused pre-drilled holes and general repairs to damaged surfaces.

PTDGRPTIM752030