Solder

Bakers Fluid No.3 is a specially formulated liquid flux ideal for soldering and tinning of copper and tinned materials.
Easy to apply.
Fast acting and economical in use, ensuring sound strong joints.

PTDGRPBAK125

An effective and reliable flux paste which simplifies soldering and lead jointing.
Also suitable for lead-free and lead containing solder alloys.
Quick and clean to use.
UKWBF listed and approved by British Gas and WRAS.

PTDGRPFLU100

A lead free solder produced to BS EN 29453 (99.5% tin, 0.5% copper. WRAS Approved. Melting point of 227-228C.

For use with potable water supplies.

PTDGRPFRYLF250

A smooth paste which has been developed for use when installing or repairing pipework for water, heating and gas services etc.
Water soluble, this flux is manufactured in line with the recommendations of MARC, offering good penetration of surface oxide with no pre-cleaning necessary.

PTDGRPFRYPFSMALL

Soldering Flux acts as a chemical cleaning agent to remove impurities from joint surfaces when soldering, ensuring a better joint. It has a non-acidic, non-toxic formula, offering fitters the benefits of savings, safety and certainty.

WRAS (The Water Regulations Advisory Scheme) approved. Products compliant with this approval are accepted by all water suppliers in the UK.

PTDGRPLAC2

Weller General Purpose Resin Core Solder with 1.5 mm diameter.

Supplied on a reel.

PTDGRPWEL54002599

Weller 1 mm diameter solder with a resin core supplied on a reel.

PTDGRPWEL54002999

Convenient and economical to use, applied easily by brush, swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and, as the solder and flux are both applied at once, it saves time.

Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly.

PTDGRPFRY51930

Savbit Ersin alloy solder reduces copper erosion and increases the life of soldering iron bits by up to 10 times. Suitable for all telecommunications and electronics work.

Type: M2 Ersin 5 Core Solder.
Diameter: 0.7mm.

PTDMULM2

A self-fluxing multicore solder with five cores of Ersin flux for instant wetting of joints in all electrical and electronic applications.

Type: Size 10 reel. 60/40 Solder.
Diameter: 0.7mm.

PTDMUL10

A general purpose, self-fluxing multicore solder. Size 6, 40/60 alloy, suitable for all electrical joints.

Type: Size 6 Dispenser.
Diameter: 1.2mm.

PTDMUL6

Savbit Ersin five core alloy solder reduces copper erosion and increases the life of soldering iron bits by up to 10 times. Suitable for all telecommunications and electronics work.

Type: M7 Ersin 5 Core Solder. 60/40.
Diameter: 0.7mm.

PTDMULM7

Blowpipe commercial grade solder is supplied in thin strips weighing approxmately 58grms.

Total Weight: 0.5kg approx.

PTDFRYBLO

An effective and reliable flux paste which simplifies soldering and lead jointing.
Also suitable for lead-free and lead containing solder alloys.
Quick and clean to use.
UKWBF listed and approved by British Gas and WRAS.

Size: 100g.

PTDFLU100

An effective and reliable flux paste which simplifies soldering and lead jointing.
Also suitable for lead-free and lead containing solder alloys.
Quick and clean to use.
UKWBF listed and approved by British Gas and WRAS.

Size: 450g.

PTDFLU450