3741 items

Screws

Screws
View as Grid List

3741 items

Set Ascending Direction Set Descending Direction
  1. ForgeFix General Purpose Screw, Countersunk, Twin Thread, Zinc Plated, Blister Pack Range

    SKU: PTDGRPFORCK124ZB

    These Forgefix General Purpose Pozi Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials.

    APPLICATION:
    Ideal for use in many ironmongery, electrical and plumbing applications.
    Can be used with various screw cover caps.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver.

    The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving.

    Imperial Size > Metric
    No.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mm
    No.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mm

    PTDGRPFORCK124ZB

    Learn More
  2. ForgeFix Torxfast Hex Head Timber Fixing Screws Green Range

    SKU: PTDGRPFORTXFTF100

    The Forgefix Torxfast Timber Fixing Screws have a Hex flange head and an extremely coarse thread offering increased holding power in all types of decking timber. They are specifically designed to be used in decking construction but are also widely used in all manner of exterior timber, fencing, and landscaping applications.

    They have a specialist anti-corrosion green treated finish and a ACQ resistant exterior grade coating with up to 1000 hours salt spray protection. Boxed in 50s with magnetic nut setters included for speed of installation.

    Available in 5 sizes covering most decking assembly applications.

    PTDGRPFORTXFTF100

    Learn More
  3. ForgeFix TechFast Screws, Timber to Steel, CSK/Wing Range

    SKU: PTDGRPFORTFC4838L

    From:  

    £6.11

    Inc VAT:  

    £7.33

    Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX compatible insert for a higher transmission of power. With improved countersinking from recessed ribs.

    Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.

    PTDGRPFORTFC4838L

    Learn More
  4. ForgeFix TechFast Screws, Composite Panels to Steel Range

    SKU: PTDGRPFORTFH55105H

    From:  

    £12.20

    Inc VAT:  

    £14.64

    Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours.

    Complies with EU Safety, Health and Environmental requirements.

    They are supplied with 19mm EPDM rubber washers.

    PTDGRPFORTFH55105H

    Learn More
  5. ForgeFix TechFast Screws, Roofing Sheet to Steel Light-Duty Range

    SKU: PTDGRPFORTFH5525L

    From:  

    £4.99

    Inc VAT:  

    £5.99

    Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours.

    Complies with EU Safety, Health and Environmental requirements.

    Supplied without washer.

    PTDGRPFORTFH5525L

    Learn More
  6. ForgeFix TechFast Screws, Metal Roofing to Timber Range

    SKU: PTDGRPFORTFH63100

    From:  

    £8.76

    Inc VAT:  

    £10.51

    Forgefix TechFast Metal Roofing Panels to Timber Hex Screws are used to join metal roofing panels to timber frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. No pre-drilling is required and the self-drilling T17 Gash Point on screws makes for a rapid installation.

    The nails are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements.

    They are supplied with 16mm EPDM rubber washers.

    PTDGRPFORTFH63100

    Learn More
  7. ForgeFix TechFast Screw Roofing Sheets to Steel Range

    SKU: PTDGRPFORTFHW5570L

    From:  

    £7.33

    Inc VAT:  

    £8.80

    Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours.

    Complies with EU Safety, Health and Environmental requirements.

    They are supplied with 16mm EPDM rubber washers.

    PTDGRPFORTFHW5570L

    Learn More
  8. ForgeFix TechFast Screws, Composite Panels to Steel Range GRPFORTFHW5125H

    SKU: PTDGRPFORTFHW5125H

    From:  

    £13.51

    Inc VAT:  

    £16.21

    Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours.

    Complies with EU Safety, Health and Environmental requirements.

    They are supplied with 16mm EPDM rubber washers.

    PTDGRPFORTFHW5125H

    Learn More
  9. ForgeFix TechFast Screws, Composite Roof Panel to Timber Range

    SKU: PTDGRPFORTFHW63150

    From:  

    £17.21

    Inc VAT:  

    £20.65

    Forgefix TechFast Composite Roof Panel to Timber Hex Screws are used to join composite roof panels to timber frame buildings. The specially designed compression control thread prevents damage and denting of panels. No pre-drilling required, the self-drilling T17 gash point on screws allows for a rapid installation.

    The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements.

    They are supplied with 16mm EPDM rubber washers.

    PTDGRPFORTFHW63150

    Learn More
  10. ForgeFix TechFast Self-Drilling Stitching Hex Screw & Washer Range

    SKU: PTDGRPFORTFHWD6322

    From:  

    £8.08

    Inc VAT:  

    £9.70

    Forgefix TechFast Self-Drilling Stitching Hex Screws are used to join metal roofing sheet panels together. They are self-drilling up to 2.5mm. The smaller No.1 drill tip can drill through 2 sheets then engage the threads to clamp the sheets together under the head.

    They have an 8mm Hex head. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements.

    They are supplied with 16mm EPDM rubber washers.

    PTDGRPFORTFHWD6322

    Learn More
  11. TIMco Screw Eyes - BZP Range

    SKU: PTDGRPTIM40SEP

    From:  

    £0.99

    Inc VAT:  

    £1.19

    The TIMco TIMpac has been specifically designed and presented to give strong visual impact, durability, and simple identicfication of products. The distinctive bag will help to display and sell the product, and will also give the tradesman a robust and convenient packaging to transport, store and use on site. Screw eyes are available in the TIMpac.

    PTDGRPTIM40SEP

    Learn More
  12. ForgeFix Machine Screws, Pozi, Pan Head, ZP Range

    SKU: PTDGRPFORFPMSPH312

    From:  

    £1.22

    Inc VAT:  

    £1.46

    These Forgefix Pozidriv Machine Screws are designed for use with nuts or pre-tapped holes. They are Zinc plated for increased corrosion resistance. Their Pan Head with a flat under head surface makes the screws ideal to lay flat on sheet material of all types, thus reducing deformation.

    APPLICATION:

    Ideal for use in many DIY, ironmongery, electrical and plumbing applications.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver.

    A Machine screw is generally a smaller fastener, threaded the entire length of its shank that usually has a recessed drive type (Slotted, Phillips, etc.).

    PTDGRPFORFPMSPH312

    Learn More
  13. ForgeFix Wood Screws, Slotted, Raised Head, Brass Range

    SKU: PTDGRPFORFPRA16B

    From:  

    £3.01

    Inc VAT:  

    £3.61

    These ForgeFix traditional slotted, single thread wood screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion.

    APPLICATION:

    Used for both decorative applications and in applications where the screw may come in to contact with the elements avoiding corrosion.

    Can be used with all manner of wall plugs. Slotted screw driver required.

    With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used.

    Raised head screws have both countersunk and raised structure, which is designed for aesthetic purposes on all types of ironmongery and lighting applications.

    The single threads have been designed to offer higher pull out values and quicker insertion.

    PTDGRPFORFPRA16B

    Learn More
  14. ForgeFix Construction Screws, Wafer Head, Torx Compatible Range

    SKU: PTDGRPFORCS8140

    From:  

    £18.70

    Inc VAT:  

    £22.44

    The Forgefast Wafer Head Torx Compatible Construction Screws are suitable for fixing into softwood or hardwood. They have a deep Torx compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength.

    Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35, reducing likelihood of the screw shearing when used in flexible materials.

    CE approved for use in load-bearing timber construction.

    PTDGRPFORCS8140

    Learn More
  15. ForgeFix ForgeFast Decking Screws, CSK, TORX Range

    SKU: PTDGRPFORDS4550GT

    From:  

    £23.81

    Inc VAT:  

    £28.57

    The ForgeFast Decking Screws Countersunk TORX T25 are suitable for fixing into softwood or hardwood. They have a deep TORX compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn and the recessed under-head ribs provide superb countersinking. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge.

    Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35mm, reducing likelihood of screw shearing when used in flexible materials.

    CE approved for use in load-bearing timber construction.

    PTDGRPFORDS4550GT

    Learn More
No more product
Screws
© 2020 Power Tools Direct Online Ltd
VAT Number: 100 5143 84