3809 items

Screws

Screws
View as Grid List

3809 items

Set Ascending Direction Set Descending Direction
  1. Reisser R2 Professional Woodscrew Tubs + 2 Free Bits Range

    SKU: PTDGRPREI9221425PB

    Rating:
    94 %

    From:  

    £12.99

    Inc VAT:  

    £15.59

    Reisser R2 Woodscrews have been trusted for over 30 years to give consistent performance in all timbers and board materials.

    The 25 degree needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40 percent less driving resistance and easy penetration. Specially hardened steel gives the R2 maximum tensile and torsional strength and the tried and tested R2 thread pattern offers exceptionally high pull out resistance. The Yellow Tropicalised coating gives superior corrosion resistance (compared to a standard BZP coating) and the deep reinforced pozi drive countersunk head recess allows the best possible fit to the driver bit, reducing cam-out and providing extra strength at the critical junction between shank and head.

    Fully CE accredited the R2 is available if a huge range of sizes, in full and part thread and in many volume options. Presented in attractive, informative packaging the R2 Woodscrew sets the standard for the Consistency of Quality and performance of all Reisser products.

    PTDGRPREI9221425PB

    Learn More
  2. Reisser Cutter Professional Woodscrew Tubs Range

    SKU: PTDGRPREI8221425PB

    Rating:
    100 %

    From:  

    £16.79

    Inc VAT:  

    £20.15

    Reisser Cutter Woodscrews represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20 degree needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40 percent less driving resistance and easy penetration. The Yellow Tropicalised coating gives superior corrosion resistance (compared to a standard BZP coating) and the deep reinforced countersunk head recess allows the best possible fit to the driver bit, reducing cam-out and providing extra strength at the critical junction between shank and head.

    Presented in eye-catching, informative packaging the Cutter leads the way in premium High Performance Woodscrews.

    PTDGRPREI8221425PB

    Learn More
  3. Concept KTX Gold Professional Woodscrew Tubs Range

    SKU: PTDGRPCPTKTX010149

    Rating:
    100 %

    From:  

    £19.99

    Inc VAT:  

    £23.99

    Concept Gold KTX Professional Woodscrews are probably the best woodscrews available in the UK in terms of all round quality , performance and price . There are a multitude of special features and benefits to these woodscrews , as follows -

    • - Special head recess suitable for Concept , Pozi and Square Drive bits
    • - Stick fit head recess
    • - 50mm hardened steel bit in every box or tub ( quality bit suited to impact drivers )
    • - No wobbling or slippage
    • - Easy fixing
    • - Very sharp start point
    • - Curved cut from point speeds penetration and clears debris working with the rotation of the screws
    • - Reinforced double countersunk head
    • - Helical thread cut for debris removal and speed of penetration
    • - Hardened steel
    • - Angled ribs under the head allow for a smooth surface finish and the minimum of surface disturbance
    • - Significantly reduced splitting in timber
    • - Deep recessed head maximises bit hold
    • - Lubricated coating speeds entry into timber
    • - Suitable for all wood types including hardwoods
    • - Packaged in lined hard card box with flip top lid ( ideally suited for trade use ) or in tubs for regular users with handle and resealable lid
    • - Stick fit head allows for one handed fitting in certain situations
    • - Stick fit head greatly improves ability to remove screw from timber
    • - Stick fit head with special hardened bits make ideal for impact drivers

    All users of KTX find a reason to love the screws be that the quality of the packaging , the lack of head damage to the screws , the speed of fitting , the free bits or just the consistent reliable quality.

    Once tried, you will not want to use another brand of screws again.

    EN:14592
    All Concept woodscrews are CE approved.
    Shear Strength : M5.0 > 7000Nm

    PTDGRPCPTKTX010149

    Learn More
  4. Concept XR Gold Woodscrew Tubs Range

    SKU: PTDGRPCPTXR010254

    Rating:
    100 %

    From:  

    £14.99

    Inc VAT:  

    £17.99

    Concept Gold XR professional woodscrews available in either boxed or tub form the screws are made from hardened steel and have
    special features and benefits that make them suited to all wood types . The key features are -

    • Deep pozi head recess
    • Reinforced double countersunk head
    • Ribs to provide a smooth surface finish
    • Lubricated for fast entry
    • Very sharp start point to speed penetration
    • Thread length cut to speed entry and remove debris
    • On larger sizes special curved thread rollet to improve penetration and speed of entry
    • Hardened steel


    All Concept woodscrews are CE approved.

    PTDGRPCPTXR010254

    Learn More
  5. ForgeFix Multi-Purpose Screws, Pozi, CSK, ZP Range GRPFORMPS313ZP

    SKU: PTDGRPFORMPS313ZP

    From:  

    £0.64

    Inc VAT:  

    £0.77

    These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc finish for increased durability.

    The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications.

    APPLICATION
    Suitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.

    The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver.

    The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.

    PTDGRPFORMPS313ZP

    Learn More
  6. ForgeFix ForgeFast Pozi Compatible Wood Screws, Box Range

    SKU: PTDGRPFORFFP312Y

    Rating:
    100 %

    From:  

    £2.20

    Inc VAT:  

    £2.64

    These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power.

    The screws have an anti-friction thread for reduced splitting of the timber, reduced jacking and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel.

    The screws have a Elementech 400 coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours.

    The screws are suitable for interior use.

    PTDGRPFORFFP312Y

    Learn More
  7. ForgeFix ForgeFast TORX Compatible Wood Screws Box Range

    SKU: PTDGRPFORFFT312Y

    From:  

    £2.34

    Inc VAT:  

    £2.81

    ForgeFix ForgeFast Wood Screws have a universally accepted, Torx compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power.

    The screws have a patented drill and drive thread for reduced splitting of the timber, reduced jacking and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel.

    The screws have an Elementech 400 coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours.

    The screws are suitable for interior use.

    Every box is supplied with a Torx compatible bit.

    PTDGRPFORFFT312Y

    Learn More
  8. ForgeFix Mirror Screws, Chrome Domed Top, ZP Range GRPFORMS34CP

    SKU: PTDGRPFORMS34CP

    From:  

    £2.73

    Inc VAT:  

    £3.28

    These Forgefix Mirror Screws are zinc plated for resistance to corrosion, and have a slotted screw head and a threaded female insert in the head and shank. They have a chrome plated dome with a threaded machine screw type male insert, and screw-in top.
    Often used when fixing mirrors or signage, the single threaded screws will hold firm in wall plugs.

    APPLICATION:
    Suitable for use when fixing mirrors or signage in sanitary and similar locations.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used.

    PTDGRPFORMS34CP

    Learn More
  9. ForgeFix Screw Cup Washer, Polished Brass Range GRPFORSCW6B

    SKU: PTDGRPFORSCW6B

    From:  

    £6.75

    Inc VAT:  

    £8.10

    These Forgefix Screw Cup Washers have a solid brass finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws.

    APPLICATION
    To enable flush finish in numerous joinery installations.
    Can be used with most screw types.

    PTDGRPFORSCW6B

    Learn More
  10. ForgeFix Screw Cup Washers, Nickel Plated Range GRPFORSCW6N

    SKU: PTDGRPFORSCW6N

    From:  

    £7.23

    Inc VAT:  

    £8.68

    These Forgefix Screw Cup Washers are made from solid brass with a nickel plated finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws.

    APPLICATION
    To enable flush finish in numerous joinery installations.
    Can be used with most screw types.

    The Nickel plating process provides a coating to considerably prolong the parts life. Nickel plating is probably the most corrosion resistant finish available and is often used on socket screws for electric switch sockets avoiding corrosion and cross contamination. It leaves a bright, aesthetic finish and is extremely hardwearing.

    PTDGRPFORSCW6N

    Learn More
  11. ForgeFix Screw Eyes, ZP Range

    SKU: PTDGRPFORSE408M

    From:  

    £0.40

    Inc VAT:  

    £0.48

    These Forgefix Screw Eyes are Zinc Plated for increased resistance to corrosion. They simply screw directly into timber and similar materials. Drilling a pilot hole is advisable. The screws are also suitable for use with all types of wall plugs.

    APPLICATION
    Screw Eyes are used to attach cables, wires and twine to numerous applications.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    PTDGRPFORSE408M

    Learn More
  12. ForgeFix Screw Hooks, ZP Range

    SKU: PTDGRPFORSH558M

    From:  

    £0.74

    Inc VAT:  

    £0.89

    These Forgefix Screw Hooks are zinc plated for increased resistance to corrosion. They simply screw directly into timber and similar materials. Drilling a pilot hole is advisable. The screw head is also suitable for use with all types of wall plugs.

    APPLICATION:
    Screw Hooks are used to attach cables, wires and twine to many numerous applications. Also ideal as a storage accessory for use as a hanging hook.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    PTDGRPFORSH558M

    Learn More
  13. ForgeFix Socket Screws, Slotted, RSH, NP Range

    SKU: PTDGRPFORSS3525NPM

    From:  

    £1.94

    Inc VAT:  

    £2.33

    These Forgefix Socket Screws have a raised head, and are designed for attaching electrical wall sockets and switches. The screws have a slotted head and are nickel plated for increased durability.

    APPLICATION
    Used specifically for attaching electrical wall socket and switches to back plates.

    The Nickel plating process coats mild steel or stainless steel to considerably prolong the parts life. Nickel plating is probably the most corrosion resistant finish available and is often used on socket screws for electric switch sockets avoiding corrosion and cross contamination. It leaves a bright aesthetic finish and is extremely hardwearing.

    With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used.

    Raised heads have both countersunk and raised structure which is designed for aesthetic purposes on all types of ironmongery and lighting applications.

    PTDGRPFORSS3525NPM

    Learn More
  14. ForgeFix Vine Eyes, ZP Range

    SKU: PTDGRPFORVE10012M

    From:  

    £1.20

    Inc VAT:  

    £1.44

    These Forgefix Vine Eyes simply screw into timber and similar materials. Drilling a pilot hole is advisable.
    The screws are zinc plated for increased resistance to corrosion, and the screw thread is suitable for use with all types of wall plugs.

    APPLICATION:
    Vine Eyes are used to attach cables, wires and twine for many numerous applications. Widely used in gardening and agricultural services.

    Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

    PTDGRPFORVE10012M

    Learn More
  15. ForgeFix Drywall Screws, Phillips, Bugle Head, BP Range

    SKU: PTDGRPFOR200DWS25

    From:  

    £1.84

    Inc VAT:  

    £2.21

    These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.

    APPLICATION:
    Designed for fitting dry linings to studding.

    Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.

    The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.

    Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.

    PTDGRPFOR200DWS25

    Learn More
No more product
Screws
© 2020 Power Tools Direct Online Ltd
VAT Number: 100 5143 84