Decorative Paints

Rustins Metal Lacquer is used to prevent discolouration caused by oxidisation and tarnishing. It leaves a colourless film that does not yellow or craze on ageing as cellulose lacquers do.

Has excellent adhesion on chrome, brass, copper and silver.

Size: 125ml

PTDRUSCML125

Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC.

Clean brushes in soap and water.

Rustins Matt Paint Black Quick Drying.

Size: 500 ml.

PTDRUSBM500

Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC.

Clean brushes in soap and water.

Rustins Matt Paint Black Quick Drying.

Size: 1 Litre.

PTDRUSBM1L

Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC.

Clean brushes in soap and water.

Rustins Satin Black Paint Quick Drying.

Size: 250 ml.

PTDRUSBS250

Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC.

Clean brushes in soap and water.

Rustins Satin Black Paint Quick Drying.

Size: 1 Litre.

PTDRUSBS1L

Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC.

Clean brushes in soap and water.

Rustins Satin Black Paint Quick Drying.

Size: 2.5 Litre.

PTDRUSBS25L

Rustins Aluminium Paint is an alkyd based oil paint which can be applied over existing paints and is ideal for use on wood and metal. Particularly good for protecting exterior steelwork. Made with leafing grade aluminium for extra water-resistance. Heat resistant up to 105C.

One coat is usually sufficient. A second coat may be applied if required. Touch dry in approximately 4 hours, depending on temperature and humidity and a second coat may be applied after 12-16 hours if required. 13m/L/coat, depending on the absorbency of the surface. May be applied over solvent-based paint.

Rustins Aluminium Paint.

Size: 250ml

PTDRUSAP250

Rustins Aluminium Paint is an alkyd based oil paint which can be applied over existing paints and is ideal for use on wood and metal. Particularly good for protecting exterior steelwork. Made with leafing grade aluminium for extra water-resistance. Heat resistant up to 105C.

One coat is usually sufficient. A second coat may be applied if required. Touch dry in approximately 4 hours, depending on temperature and humidity and a second coat may be applied after 12-16 hours if required. 13m/L/coat, depending on the absorbency of the surface. May be applied over solvent-based paint.

Rustins Aluminium Paint.

Size: 500ml

PTDRUSAP500

Rustins Aluminium Paint is an alkyd based oil paint which can be applied over existing paints and is ideal for use on wood and metal. Particularly good for protecting exterior steelwork. Made with leafing grade aluminium for extra water-resistance. Heat resistant up to 105C.

One coat is usually sufficient. A second coat may be applied if required. Touch dry in approximately 4 hours, depending on temperature and humidity and a second coat may be applied after 12-16 hours if required. 13m/L/coat, depending on the absorbency of the surface. May be applied over solvent-based paint.

PTDGRPRUSAP250

Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC.

Clean brushes in soap and water.

PTDGRPRUSBM125

The Rustins Quick Dry Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish.

Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over a previously coated surface, test a small area for compatibility. Use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints.

Get the shabby chic look by painting your furniture with multiple coats, then distressing it by lightly sanding down small areas using fine sandpaper or steel wool.

Specification:

Coverage Approximately: 13m per litre
Coats: 1 coat over primed surfaces, 2 coats (minimum) are required on bare substrates
Drying Time: Touch Dry 30 minutes, depending on temperature and humidity
Re-coating Time: 2 hours minimum, depending on temperature and humidity
Application Temp: Ideally 15-25C. Do not use below 10C or in conditions of high humidity

This Rustins Chalky Finish Paint has the following specification:

Colour: Kenwood Cream.
Finish: Velvety Flat Matt.
Size: 250ml.

PTDRUSCPC250

The Rustins Quick Dry Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish.

Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over a previously coated surface, test a small area for compatibility. Use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints.

Get the shabby chic look by painting your furniture with multiple coats, then distressing it by lightly sanding down small areas using fine sandpaper or steel wool.

Specification:

Coverage Approximately: 13m per litre
Coats: 1 coat over primed surfaces, 2 coats (minimum) are required on bare substrates
Drying Time: Touch Dry 30 minutes, depending on temperature and humidity
Re-coating Time: 2 hours minimum, depending on temperature and humidity
Application Temp: Ideally 15-25C. Do not use below 10C or in conditions of high humidity

This Rustins Chalky Finish Paint has the following specification:

Colour: Kenwood Cream.
Finish: Velvety Flat Matt.
Size: 500ml.

PTDRUSCPC500

The Rustins Quick Dry Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish.

Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over a previously coated surface, test a small area for compatibility. Use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints.

Get the shabby chic look by painting your furniture with multiple coats, then distressing it by lightly sanding down small areas using fine sandpaper or steel wool.

Specification:

Coverage Approximately: 13m per litre
Coats: 1 coat over primed surfaces, 2 coats (minimum) are required on bare substrates
Drying Time: Touch Dry 30 minutes, depending on temperature and humidity
Re-coating Time: 2 hours minimum, depending on temperature and humidity
Application Temp: Ideally 15-25C. Do not use below 10C or in conditions of high humidity

This Rustins Chalky Finish Paint has the following specification:

Colour: Windsor White.
Finish: Velvety Flat Matt.
Size: 250ml.

PTDRUSCPW250

The Rustins Quick Dry Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish.

Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over a previously coated surface, test a small area for compatibility. Use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints.

Get the shabby chic look by painting your furniture with multiple coats, then distressing it by lightly sanding down small areas using fine sandpaper or steel wool.

Specification:

Coverage Approximately: 13m per litre
Coats: 1 coat over primed surfaces, 2 coats (minimum) are required on bare substrates
Drying Time: Touch Dry 30 minutes, depending on temperature and humidity
Re-coating Time: 2 hours minimum, depending on temperature and humidity
Application Temp: Ideally 15-25C. Do not use below 10C or in conditions of high humidity

Rustins Chalky Finish Paint RUSCPW500 comes in the following:

Colour: Windsor White.
Finish: Velvety Flat Matt.
Size: 500ml.

PTDRUSCPW500

The Rustins Quick Dry Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish.

Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over a previously coated surface, test a small area for compatibility. Use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints.

Get the shabby chic look by painting your furniture with multiple coats, then distressing it by lightly sanding down small areas using fine sandpaper or steel wool.

Specification:

Coverage Approximately: 13m per litre
Coats: 1 coat over primed surfaces, 2 coats (minimum) are required on bare substrates
Drying Time: Touch Dry 30 minutes, depending on temperature and humidity
Re-coating Time: 2 hours minimum, depending on temperature and humidity
Application Temp: Ideally 15-25C. Do not use below 10C or in conditions of high humidity

PTDGRPRUSCPC250