Stains Preservers & Treatments
- Everbuild Lumberjack Wood Preserver Range
WOOD PRESERVER is a low solvent, low odour solution based on Micro-fine active technology. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products. In addition the use of ultra light fast pigments on the coloured variants give an even fade resistant finish which will last for years.
WOOD PRESERVER is fast drying and non flammable and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay and fungi.
Solvent Free formula.
Internal and external use.
Can be applied to damp timbers.
PTDGRPEVBLJCR05Learn MoreEverbuild Triple Action Wood Treatment Range
TRIPLE ACTION WOOD TREATMENT takes care of all your wood treatment and preservation needs in the one can. It is a low solvent, low odour solution based on Micro-fine active technology with added fungicides, algaecides and Permethrin to actively kill and protect against all known wood rot, decay, fungi and wood boring insects. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products.
TRIPLE ACTION WOOD TREATMENT is fast drying and non flammable and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay; fungi and wood boring insects/larvae.
PTDGRPEVBLJUN01Learn MoreCuprinol Garden Furniture Stain Range
The Cuprinol Softwood & Hardwood Furniture Stain creates a lasting water-repellent barrier and weather protection. Suitable for all woods, including hardwood and softwood. It adds a rich colour to softwood and a light tint to hardwood.
Coverage: Up to 15 square metres per 750ml.
PTDGRPCUPGFSC750Learn MoreCuprinol Anti Slip Decking Stain Range
Cuprinol Anti Slip Decking Stain with invisible anti-slip microbeads gives a semi-transparent matt finish specially formulated for all types of timber decking. It provides both colour and a tough durable protective coat that resists cracking and peeling.
It is water repellent to help prevent wood cracking and splitting and it is showerproof in less than an hour. Also suitable for use on other garden wood and is safe for plants and pets when dry.
It has an average coverage of approx 20m with 2 coats
PTDGRPCUPUTDSAM25LLearn MoreCuprinol Ducksback 5 Year Waterproof for Sheds & Fences Range
Cuprinol 5 Year Ducksback has an advanced, wax enriched, formulation that colours and weather protects rough sawn garden wood for up to 5 years. The formulation is also showerproof in 1 hour. Its non-drip formulation minimises mess during application. It is quick drying, low odour and safe to use to use around plants and pets.
Ducksback is ideal for restoring and enhancing the appearance of sheds and fences and will help to keep them looking good for years to come.
Coverage: A 5 litre pack covers to to 24 square metres with one coat.
PTDGRPCUPDBAB5LLearn MoreCuprinol Spray Fence Treatment Range
Cuprinol One Coat Sprayable Fence Treatment has been specially developed for use with the Cuprinol Fence Sprayer and the Cuprinol Power Sprayer. Breakthrough technology allows you to spray accurately and evenly with minimal effort to achieve a professional finish in just one coat. The sprayer allows you to reach all awkward spaces without the need for a brush. Sprayable Fence Treatment is quick drying, pleasant to use and is safe for use near plants and pets and when youre finished, simply flush the sprayer through with water. Time efficient, this treatment enables each fence panel to be treated in less than 4 minutes - a fraction of the time that it would normally take with a brush.
Coverage: A 5 litre pack will cover up to 15 square metres
Available in a range of colours.
PTDGRPCUPSFTAB5LLearn MoreCuprinol Shed & Fence Protector Range
Cuprinol Shed & Fence Protector is a lightly tinted, solvent-based formulation that penetrates deep into the wood to give natural, rustic looking colour to both rough sawn and smooth planed timber. It also contains water repellents to help resist rain penetration.
PTDGRPCUPSFAB1LLearn MoreCuprinol Garden Shades Range
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood, with 6 years weather protection. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through.
It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden.
It is water-based and harmless to plants and pets.
PTDGRPCUPGSBAR1LLearn MoreCuprinol Ultimate Garden Wood Preserver Range
Cuprinol Ultimate Garden Wood Preserver has a superior, water-based formulation that works in 3 ways. Its UV filters give long lasting colour for up to 5 years, added waxes and resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot, decay and blue stain.
Ultimate Garden Wood Preserver can be used on all types of rough or planed wood such as sheds, fences, summer houses, gates and arbours.
Drying time: 2-6 hours.
PTDGRPCUPGWPREAB1LLearn MoreCuprinol Total Deck Restore & Oil Wood Clear Range
Cuprinol Total Deck offers a natural finish that protects decking all year round. Its unique double action formulation restores and protects grey and weathered wood.
Cuprinol Total Deck is easily applied with a garden broom, which can be washed after use and re-used. This innovative new decking solution not only pre treats decking but gives a protective finish.
Drying time: 2-6 hours.
Coverage: 22m per 2.5 Litres (1 application).
Coverage can vary depending on application method and the condition and nature of the surface.
PTDGRPCUPTDC25LLearn MoreCuprinol UV Guard Decking Oil Range
Cuprinol UV Guard Decking Oil can be brushed or spray applied to penetrate into the wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood.
A 2.5 Litre Can covers up to 20m with 2 coats brush applied or 1 coat spray applied. Coverage can vary depending on application method and the condition and nature of the surface. Drying times is up to 6 hours but this can vary depending on the nature of the surface and the weather conditions.
PTDGRPCUPDPGT5LLearn MoreRonseal Ultimate Decking Oil Range
Ronseal Ultimate Protection Decking Oil provides superior, natural looking protection, for a longer lasting finish. The unique formula penetrates deeper into the wood to provide increased durability. Providing a lightly tinted finish it will give double the weather resistance and foot traffic protection versus standard decking oils. Unique, new to the market, water-based Linseed Oil technology, colours and waterproofs your deck in one easy step.
Gives a more natural look to your deck and is rainproof in 90 minutes, recoat in 4 hours. Primarily for use on pre-treated decking.
Untreated, weathered decking:
For untreated grey and weathered wood, use Ronseal Decking Restorer to restore the decks natural colour and provide a sound base for application which ensures the oil penetrates effectively.
Previously finished decking:
Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. To avoid patchiness, and if using a contrasting colour, make sure you remove all previous finishes using Ronseal Decking Stripper. Ensure cut ends are adequately protected using Ronseal Decking End Grain Preserver.
New decking should be allowed to weather naturally (usually 6 months). This will make sure any pre-treatment has eroded allowing the stain to penetrate and adhere to the deck. Clean the deck with Ronseal Decking Cleaner and Reviver using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the timber. Rinse thoroughly with clean water ideally using a pressure washer. Allow to dry fully before over coating.
Test effectiveness of the cleaning by splashing the deck with water. If beading occurs, re-clean. Retest before applying any oil. The shade label indicates approximate colour only. It is recommended that you test a small area to determine the final colour which may be influenced by the texture, grain, colour, porosity, type of wood and any previous treatment.
PTDGRPRSLUDSMG25LLearn MorePolyvine Stone & Brick Protector Dead Flat Finish Range
The Polyvine Stone & Brick Protector is a high performance water-based masonry protector and water repellent. It resists grease, oil, acids, alkaline and salts by forming a moisture barrier that seals off the surface. Dries to a dead flat finish, which retains the natural look of the substrate. Protection of the surface begins immediately after application and is complete in approximately 24 hours.
Do not use in temperatures below 5C/40F or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller. Mix well before use, for general applications on masonry, brickwork and stone, a single application will be sufficient.
Ideal for: stone, plaster, brick, slate, flagstones, fireplaces, exposed stone walls, brick walls and stone window ledges.
Drying Time: 15 minutes to 1 hour (Depending on temperature).
Coverage: 15-20m per litre (Depending on the porosity of the material).
PTDGRPCASSBPDF1LLearn MoreBlackfriar Traditional Exterior Wood Stain Range
Blackfriar Exterior Woodstain stains, protects and finishes exterior timber. It can be used on all hard and softwoods. Its weather-resistant, water-repellent satin finish resists flaking, peeling and cracking. It is also Microporous, so it lets the timber breathe.
For hard and soft woods.
Application Method: Brush or roller.
Touch Dry: 2-4 hours.
Hard Dry: 7 days.
Recoatable: 16 hours.
PTDGRPBKFTEWSGT500Learn MoreLiberon Anti-Slip Coating Range
Liberon Anti-Slip Coating assures a non-slip surface on very smooth and humid interior and exterior flooring. It ensures that surfaces are non-slip, even when wet. It is a clear coating, and does not alter the appearance of the surface. Suitable for use on cement, concrete, stone, paving and wood. It is ideal for use on smooth and slippery flooring, or in areas of high humidity such as patios, decking, utility rooms and swimming pools.
UV and water resistant.
Coverage: 12m per litre.
Drying time: 30 minutes to touch, 12 hours total.
Application: Brush or medium haired roller.
Usage: Interior or exterior.
PTDGRPLIBASC750Learn MoreStains Preservers & Treatments
VAT Number: 100 5143 84