Home & Security

The Forge Classic Internal Letter Flap improves the look of any letter opening and to prevent draughts. Treated with a long lasting lacquer to prevent discolouration during use.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Locate letter flap in desired postion and mark fixing holes with a pencil.
2. Drill pilot holes with a 2mm drillbit.
3. Screw Letterplate into position with screws provided.

PTDGRPFGELFLAPBR

This Forge internal Door Bolt is used for securing doors or cupboards.

Made from aluminium and supplied with fitting instructions and all fixings.

Fitting Instructions:
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a 2mm drillbit and fasten in place using supplied screws.
3. If being installed on an inward opening door:- Position the bolt keep onto the door frame, and ensure that the bolt moves freely through the hole. it may be necessary to remove part of the frame with a chisel.

PTDGRPFGEDBLTAL3

This Forge internal Door Bolt can be used for securing doors or cupboards.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a 2mm drillbit and fasten in place using supplied screws.
3. If being installed on an inward opening door:- Position the bolt keep onto the door frame, and ensure that the bolt moves freely through the hole. it may be necessary to remove part of the frame with a chisel.

PTDGRPFGEDBLTBR2

This Forge Door Bolt is heavy-duty and yet still decorative. It is made from solid brass and laquered to prevent discolouration during use.

Ideal for internal doors and for use as secondary security.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a 2mm drillbit and fasten in place using supplied screws.
3. If being installed on an inward opening door:- Position the bolt keep onto the door frame, and ensure that the bolt moves freely through the hole. it may be necessary to remove part of the frame with a chisel.

PTDGRPFGEDBLTHVBR6

This Forge internal Door Bolt can be used for securing doors or cupboards. The necked version can be used for outward opening doors.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a 2mm drillbit and fasten in place using supplied screws.
3. If being installed on an outward opening door, use a necked version:- Drill a 8mm hole, 16mm deep in line with the bolt and screw the flat keep into position over this hole.

PTDGRPFGEDBLTNBR2

Forge internal door packs with all the ironmongery needed to hang and furnish a door. Supplied with two latch handles, a 2.1/2in tubular mortice latch and two 75mm butt hinges. Ideal for doors of 35mm thickness 10-15kg.

Fitting Instructions: To Fit Door Handles:-
1. Measure the thickness of the door and cut the square spindle bar 60mm longer than this thickness.
2. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensure the handle is square, screw hole positions with a bradawl.
3. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.

PTDGRPFGEDPCKVSTSC

Forge classic Oval Door Stop for floor mounting. The low rise oval shape prevents injury from tripping or snagging.

Supplied with fittings and fitting instructions.

Fitting Instructions:
1. Mark a postion for the door stop on the floor so that it catches the door approx 75mm from the door edge and where it will not create a tripping hazard.
2. Drill a 5mm hole and screw the door stopper into position.

PTDGRPFGEDSOVALBR

A pack of two Forge traditional Spring Door Stops for wall mounting at low level.

Supplied with fittings and fitting instructions.

Fitting Instructions:
1.Remove fixing plate from spring and screw to skirting at desired position.
2. Place spring back against base and turn clockwise so that the spring is rethreaded into the base. N.B. Additional fixings may be required for fitting to solid or hollow walls.

PTDGRPFGEDSSPRIBR

Forge stainless steel escutcheon.

Supplied with all fixings and fitting instructions.

Fitting Instructions:
1. Remove fixing plate from Escutcheon body and position over the lock hole.
2. Mark fixing holes and drill pilot holes using a 2mm drillbit.
3. Fix into position using the screws provided.
4. Replace covercap over fixing plate to conceal fixings.

PTDGRPFGEESCTEURO

The Forge range of Gable Handles incorporates a traditional backplate style with a scroll handle. The sprung handles have a lasting finish. They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 100,000 uses.

Supplied with screws and fitting instructions.

Product Dimensions:
Backplate: 170 x 42mm.
Handle: 55 x 93mm.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

PTDGRPFGEHBATGABBR

This Forge classic Backplate Handle has a scroll lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use. Ideal for internal or external use these handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses.

Screws Included.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

PTDGRPFGEHLOCVSCBR

A classic Forge Antique Lever design in antique black finish. Sprung lever operation with thick black enamelled finish.

Designed to be used with any mortice sashlock with centres of 57mm.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a Bradawl.
2. Drill 2mm Pilot holes and reposition the handle before securing using the wood screws provided.

PTDGRPFGEHLOCANTBL

This Forge Backplate Handle has a classic Georgian handle shape with traditional rope style border trim. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use.

They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 70,000 uses.

Backplate: 48 x 104mm.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the srcew hole positions with a bradawl.
2. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

PTDGRPFGEHLOCGEOBR

The Forge range of Modular Handles incorporates a modern backplate style with a straight bar handle. The sprung handles have a lasting finish and are ideal for internal or external use. They have been tested for corrosion resistance and cycle tested beyond 100,000 uses.

Backplate Size: 184 x 40mm.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

PTDGRPFGEHLOCMODBR

This Forge classic Backplate Handle has a straight lever design. The sprung handle has a lasting finish and is lacquered to prevent discolouration during use.

They are ideal for internal or external use as the handles have been tested for corrosion resistance and cycle tested beyond 120,000 uses.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensuring the handle is square, mark the screw hole positions with a bradawl.
2. Drill 2mm Pilot holes and reposition the handle before securing using the wood screws provided.
3. If fitting Bathroom handles, now insert the bathroom spindle bar through the deadbolt hole of the lock from the outside of the door and place the thumbturn onto the spindle bar. Tighten the grubscrew on the underside with the hex key provided.

PTDGRPFGEHLOCVSTBR