Mortice Latches

The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles.

Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.

Finish: Polished Brass

Case Size: 64mm

Backset: 44.5mm
Visi Pack

PTDUNNY2648PL25

The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles.

Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.

Finish: Polished Brass

Case Size: 76mm

Backset: 57mm

Visi Pack

PTDUNNY2648PL30

The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles.

Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.

Finish: Silver Enamel

Case Size: 64mm

Backset: 44.5mm

PTDUNNY2648SE25

The Union 2648 mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. The latch is made of nylon for a quieter closing action. Please note these are not suitable for use with unsprung lever handles.

Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.

Finish: Silver Enamel

Case Size: 76mm

Backset: 57mm

PTDUNNY2648SE30

The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.

Size: 64mm (2 1/2 in)

Finish: Polished Brass

Pack: Visi Pack of 1

PTDYALPM888PB25

The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.

Size: 64mm (2 1/2 in)

Finish: Chrome

Pack: Single

PTDYALPM888ZP25

The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.

Size: 76mm (3 in)

Finish: Polished Brass Finish

Pack: 1

PTDYALPM888PB30

The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.

Size: 76mm (3 in)

Finish: Chrome

Pack: 1

PTDYALPM888ZP30

The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.

The Yale YAL3PM888PB2 M888 Tubular Mortice Latches come with the following dimensions:
Size: 64mm (2 1/2 inch)
Finish: Polished Brass
Pack: 3

PTDYAL3PM888PB2

The Yale M888 tubular mortice latches are suitable for internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side, but they are not suitable for unsprung lever handles.

The Yale YAL3PM888PB2 M888 Tubular Mortice Latches come with the following dimensions:
Size: 64mm (2 1/2 inch)
Finish: Chrome Finish
Pack: 3

PTDYAL3PM888CH2

The Union 2650 rebated mortice latches are suitable for timber doors hinged on the left or right and requiring lever handle operation. Please note these are not suitable for use with unsprung lever handles. These latches are suitable for 13mm rebate.

Latches with a case size of 64.5mm (2.5 inchs) are suitable for handles with a backset of 44.5/45mm. Latches with a case size of 76mm (3 inches) are suitable for handles with a 57mm backset.

Finish : Electro Brass

Case Size: 64mm

Backset Size: 44.5mm.

PTDUNNY2650EB25

The Yale M999 rebated tubular mortice latches are suitable for rebated french doors or internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles.

Polished brass finish.

Length: 64mm (2 1/2 in)

PTDYALPM999PB64

The Yale M999 rebated tubular mortice latches are suitable for rebated french doors or internal doors where no locking is required. The latch bolt is withdrawn by spring lever handle from either side but they are not suitable for unsprung lever handles.

Polished brass finish.

Length: 76mm (3 in)

PTDYALPM999PB76

UNIONs basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality.

The ESSENTIAL Tubular Latch is a universal latch with two way action. The latch bolt can be withdrawn by a sprung lever handle from either side. It has a single piece, square forend with matching strike.

The latch is made from nylon for a quieter closing action.

Finish: Zinc plated.
Case size: 65mm (2.5 inch).
Backset: 45mm.

PTDUNNY2600ZP25

The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob.

Supplied with screws and fitting instructions.

Fitting Instructions:
1. Mark a height line on door face and edge as well as a centre line on door edge.
2. Drill a 23mm hole into door edge to accept the latch body, and a 19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).
3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.
4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.
5. Drill a 16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.

Case size: 76mm (3 inch).
Backset size: 57mm.
Forend finish: Brass.

Supplied with matching screws, face plate and strike.

PTDFGETUBLBR3