The Makita HR3210C SDS+ AVT Rotary Hammer Drill 850 Watt with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.
It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.
It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.
It is supplied with; a side handle, depth stop, bit grease and a carry case.
Input Power: 850 Watt.
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm.
Impact Energy: 5.0 Joules.
Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.
All vibration figures quoted are Tri-axial to EN60745 2006.
Vibration Drilling: 2.5 m/sec.
Vibration Chiselling: 7 m/sec.
Vibration Hammer Drilling: 10 m/sec.
Vibration K Factor: 1.5 m/sec.
Noise Sound Pressure: 89 dB(A).
Noise Sound Power: 100 dB(A).
Noise K Factor: 3 dB(A).
- Additional Information
Condition New SKU PTDGRPMAKHR3210C Brand Makita Manufacturers Part Number HR3210C/2 Retailer Barcode 0088381088718 Package Height (cm) 16 Package Width (cm) 44.5 Package Length (cm) 60 Bullet 1 Proven reliable Makita technology Bullet 2 Lightweight construction at just 10.46 Kgs Bullet 3 No Bullet 4 No Bullet 5 No Bullet 6 No