Einhell Batteries & Chargers

This Einhell Power X-Charger is a fast charger, suitable for all Power X-Change batteries. It can be fastened onto a wall and features a charging condition display.

Specification

Voltage: 18 Volt.
Charging Time: 2.0Ah: 40 mins, 3.0Ah: 60 mins, 4.0Ah: 80 mins.
Weight: 0.4kg.

PTDEINPXCHARGER

Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions.

The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life.

The intelligent charge control system controls each battery cell individually, ensuring that each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger.

The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage.

The Einhell PX-BAT4 Power X-Change Battery has the following specifcation:

Battery Capacity: 4.0Ah.
Battery Chemistry: Li-ion.
Voltage: 18 Volt.

PTDEINPXBAT4

Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions.

The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life.

The intelligent charge control system controls each battery cell individually, ensuring that each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger.

The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage.

PTDGRPEINPXBAT15

Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions.

The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life.

The intelligent charge control system controls each battery cell individually, ensuring that each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger.

The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage.

The Einhell PX-BAT2 Power X-Change Battery has the following specification:

Battery Capacity: 2.0Ah
Battery Chemistry: Li-ion
Voltage: 18V

PTDEINPXBAT2

The Einhell PXC Power-X Twincharger charges two 18V Li-ion batteries at the same time and can be used universally for all 18V Power X-Change batteries. Intelligent charging management provides maximum safety and optimum charging. Charging cycles are adjusted to the specific situation, so the batteries have a longer service life. The 6-stage charging system provides the user with up-to-the-moment battery status information. Integrated suspension eyelets for easy wall mounting.

Specification:

Output Voltage: 18V
Output Current: 3A

PTDEINCHARGETW

Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions.

The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life.

The intelligent charge control system controls each battery cell individually, ensuring that each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger.

The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage.

The Einhell PX-BAT5 Power X-Change Battery has the following specification:

Battery Capacity: 5.2Ah
Battery Chemistry: Li-ion
Voltage: 18V

PTDEINPXBAT5

The Einhell TE-CP 18 LI USB-Solo Power X-Change Battery Adaptor provides a practical and mobile power source for charging devices such as mobile phones, tablets and MP3 players.

The adaptor plugs into a Power X-Change battery, providing plenty of power for charging. It has 2 USB ports, allowing 2 devices to be charged simultaneously. For fast charging, one of the ports is supplied with a powerful 2.1Ah charging current.

Bare unit, no battery or charger.

Voltage: 18 Volt.
Power Output: USB port 1: 1.0Ah, USB port 2: 2.1Ah.
Weight: 0.06kg.

PTDEINTECP18LI

The Einhell Power-X-Change Starter Kit, contains the following:

1 x 18V 2.0Ah Power-X-Change Li-ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature, voltage and even a deeply discharged battery can be charged in repair mode which offers a long working battery life. The high quality Li-ion battery cells provide nearly no self discharge and the rubber coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling.

Battery Type: Li-ion.
Voltage Supply: 18 Volt.
Battery Capacity: 2,000 mAh.
Product Weight: 0.4kg.

1 x 18V Power-X-Change Li-ion Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, deeply discharged battery will be charged in repair mode).

Input Power: 240 Volt.
Output Voltage: 21 Volt.
Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min.
Weight: 0.5kg.

PTDEINPXSTKIT2

The Einhell Power-X-Change Starter Kit, contains the following:

1 x 18 Volt 3.0Ah Power-X-Change Li-ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature, voltage and even a deeply discharged battery can be charged in repair mode which offers a long working battery life. The high quality Li-ion battery cells provide nearly no self discharge and the rubber coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling.

Battery Type: Li-ion.
Voltage Supply: 18 Volt.
Battery Capacity: 3,000 mAh.
Product Weight: 0.4kg.

1 x 18V Power-X-Change Li-ion Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging management system for long battery life (battery status will be constantly checked and accordingly loaded, deeply discharged batteries will be charged in repair mode).

Input Power: 240 Volt.
Output Voltage: 21 Volt.
Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min.
Weight: 0.5kg.

PTDEINPXSTKIT3

Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions.

The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life.

The intelligent charge control system controls each battery cell individually, ensuring that each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger.

The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage.

The Einhell PX-BAT3 Power X-Change Battery has the following specifcation:

Battery Capacity: 3.0Ah
Battery Chemistry: Li-ion
Voltage: 18V

PTDEINPXBAT3

Einhell Power X-Change Multi-Ah Battery features high-quality Li-ion cells with no memory effect, low self-discharge and high, constant power. This cell technology delivers 100% more power for maximum performance.

With Multi-Ah technology: 6Ah for maximum charge level or 4Ah to protect the battery for 3x longer total lifetime. The charge level is precisely indicated as a % on the digital display. PLUS-technology provides increased power for intensive operation.

The ABS process-controlled battery management system stands for maximum safety, optimum performance, operating time and lifetime. Covered with a rubber-coated housing that provides increased impact protection and protects against dust, corrosion and mechanical damage.

Compatible with all Power X-Change chargers, machines and for twin battery use in demanding 36V power applications.

PTDEINPXBAT6