Power Tools

The Makita DTM50 LXT Multi-Tool has a conveniently located thumb On/Off switch for ease of use when holding the machine. It has an easy to use variable speed control dial and a hex wrench holder on body. Uses an OIS interface. Accessories can be installed at 30 increments, across 360 and it comes with a dust extraction attachment.

DTM50Z: Bare Unit, No Charger or Battery
DTM50ZSD: Bare Unit, No Charger or Battery (Loose)

Specification

No Load Speed: 6,000-20,000/min.
Oscillation Angle: 3.2
Weight: 2.0kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration K Factor: 1.5 m/sec
Vibration: Cutting Metal: 5 m/sec
Vibration: Cutting Wood: 9.5 m/sec
Vibration: Chiselling: 7.5 m/sec
Vibration: Sanding: 2.5 m/sec

The Makita DTM50Z Multi-Tool is supplied as a bare unit, no battery or charger supplied.

PTDMAKDTM50Z

The Makita DHS710ZJ 185mm LXT Twin Circular Saw has a compact and lightweight design with a rear dust exhaust port. Durable but lightweight magnesium die-cast blade case and safety cover. The blower function to clear wood dust from cutting line and it offers the same depth of cut as HS7100 (67mm). The saw is powered by 2 x 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.

Bare Unit, No Battery or Charger.

Specification:

No Load Speed: 4,600/min.
Blade: 190 x 20mm Bore
Max Cut: at 0 66mm, at 45 49mm & at 50 44mm
Weight: 4.7kg

PTDMAKDHS710ZJD

The Makita DJV182 Brushless Jigsaw has a top handle design with a brushless motor that produces a greater measure of torque per weight. More torque means less power required, so longer battery life, less motor friction.

With twin LED job lights and a blower function at the front end, your cutting line will remain illuminated and free of sawdust at all times. The tool-less blade change is a handy feature when changing hot blades, just pull back the lever and the blade drops out.

The handle is made from a rubberised material which cuts down on vibration and gives excellent grip with anti-slip dimples. Located at the rear of the machine for easy operation is the variable speed dial to suit blade speed to various applications.

Specification:

Strokes at No Load: 800-3,500/min.
Stroke Length: 26mm
Capacity: Steel 10mm, Wood 135mm, Aluminium 20mm
Weight: 2.6kg

The Makita DJV182Z Brushless Jigsaw comes as a bare unit, NO battery or charger supplied.

PTDMAKDJV182Z

The Makita DTM51 Multi-Tool has a high operational efficiency which enables it to cut through most materials with ease. Offers multi-angle settings, that span a full 360 in 30 increments. Will cut plasterboard, wood, metal, ceramic tiles and can flush cut nails and metal pipework.

Change the blade for the sanding plate and you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems). With a wide variety of accessories available for various applications.

DTM51Z: Bare Unit, No Battery or Charger.
DTM51ZJX7: Bare Unit, No Battery or Charger With Accessory Kit.

Specification

No Load Speed: 6,000-20,000/min.
Length: 324mm
Weight: 1.9kg

The Makita DTM51ZJX7 Multi-Tool is supplied with: 1 x Adaptor, 1 x Segment Saw Blade, 5 x 60 Grit Abrasive Paper, 5 x 80 Grit Abrasive Paper, 5 x 120 Grit Abrasive Paper, 5 x 180 Grit Abrasive Paper, 1 x Sanding Pad and 1 x MAKPAC case.

Bare Unit, No Battery or Charger Supplied

PTDMAKDTM51ZJX7

The Makita GA4530 115mm Slim Body Angle Grinder fits any users palm and fingers perfectly. It provides easy and comfortable handling while minimising hand fatigue and pain. The side grip is angled at 20 for manoeuvrability and the best performance.

The GA4530 is fitted with a high-quality motor with excellent heat resistance. It has built-in dust protection with dustproof ball bearings, the motor field is coated with protective powder varnish. Two labyrinth rings seal the bearings and machine bevelled gears from dust and dirt.

Specification:

Input Power: 720W
No Load Speed: 11,000/min.
Wheel: 115 x 22.23mm Bore
Weight: 1.8kg

1 x Makita GA4530R 115mm Slim Body Angle Grinder 720W 240V Version.

PTDMAKGA4530R

The Makita GA4530 115mm Slim Body Angle Grinder fits any users palm and fingers perfectly. It provides easy and comfortable handling while minimising hand fatigue and pain. The side grip is angled at 20 for manoeuvrability and the best performance.

The GA4530 is fitted with a high-quality motor with excellent heat resistance. It has built-in dust protection with dustproof ball bearings, the motor field is coated with protective powder varnish. Two labyrinth rings seal the bearings and machine bevelled gears from dust and dirt.

Specification:

Input Power: 720W
No Load Speed: 11,000/min.
Wheel: 115 x 22.23mm Bore
Weight: 1.8kg

1 x Makita GA4530R 115mm Slim Body Angle Grinder 720W 110V Version.

PTDMAKGA4530RL

The Makita GA4530 115mm Slim Body Angle Grinder fits any users palm and fingers perfectly. It provides easy and comfortable handling while minimising hand fatigue and pain. The side grip is angled at 20 for manoeuvrability and the best performance.

The GA4530 is fitted with a high-quality motor with excellent heat resistance. It has built-in dust protection with dustproof ball bearings, the motor field is coated with protective powder varnish. Two labyrinth rings seal the bearings and machine bevelled gears from dust and dirt.

Specification:

Input Power: 720W
No Load Speed: 11,000/min.
Wheel: 115 x 22.23mm Bore
Weight: 1.8kg

PTDGRPMAKGA4530R

The Makita SG1251J Wall Chaser features an improved trigger switch, operable with the fingers of the hand holding the top handle. With an ergonomically designed front handle that can be adjusted to multiple positions. The main top handle also has a rubberised soft grip for comfort.

Adjustable cutting width in 9 stages by inserting spacers SJS (Super Joint System) to prevent motor burn out. With a soft start, constant speed control and electronic current limiter for overload protection. Can be connected to a vacuum cleaner for a clean working environment.

Specification

Input Power: 1,400W
No Load Speed: 10,000/min.
Blade: 125 x 22.23mm Bore
Max. Cutting Depth: 30mm
Cutting Diameter: 3mm Steps 6-30mm
Weight: 4.5kg

PTDGRPMAKSG1251J

The Makita DHR242RMJ SDS Plus Rotary Hammer offers 3 modes of operation: Rotation + Hammering, Hammering Only and Rotation Only. Fitted with a one touch slide chuck for SDS-plus bits. The easy-to-grip handle has been ergonomically designed to give maximum power thrust and provide a secure and comfortable grip in any orientation of operation.

The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact.

Supplied with: 1 x Depth Stop, 1 x Side Handle, 1 x MAKPAC Type 4 Connector Case, 1 x 837649-1 Inner Tray, 2 x 18 Volt 4.0Ah Li-Ion Batteries and 1 x DC18RC Compact Charger.

Specification

No Load Speed: 0-950/min.
Impact Rate: 0-4,700/bpm, 2.0 Joules.
Capacity: Concrete: 24mm, Steel: 13mm, Wood: 27mm.
Weight: 3.3kg.

PTDMAKDHR242RMJ

The Makita DTW1001 Brushless 3/4in Impact Wrench offers an extra high tightening torque of 1000Nm thanks to its high-powered, brushless motor and newly designed impact mechanism. It is equipped with twin LED job lights with pre-glow and afterglow function for working in dark areas and 3-stage impact power selection. This reduces fault tightening, you can suit the material of the workpiece or the screw at a push of a button.

Supplied as a Bare Unit - No Battery or Charger supplied.

Specification:

Bit Holder: 3/4in Square
No Load Speed: 900/1,000/0-1,800/min.
Impact Rate: 0-1,800/0-2,000/0-2,200/bpm
Max. Fastening Torque: 1,050Nm
Nut Busting Torque: 1,700Nm
Capacity: Standard Bolt M12-M30, High Tensile Bolt M10-M24

PTDMAKDTW1001Z

The Makita DTW1002 Brushless 1/2in Impact Wrench offers an extra high tightening torque of 1000Nm thanks to its high powered, brushless motor and newly designed impact mechanism. It is equipped with twin LED job lights with pre-glow and afterglow function for working in dark areas and 3-stage impact power selection. This reduces fault tightening, you can suit the material of the workpiece or screw, at a push of a button.

Specification:

Bit Holder: 1/2in Square
No Load Speed: 0-900/1,000/1,800/min.
Impact Rate: 0-1,800/0-2,000/0-2,200/bpm
Max. Fastening Torque: 1,000Nm
Nut Busting Torque: 1,600Nm
Bolt Capacity: Standard M12-M30, High Tensile M10-M24
Weight: 3.6kg

This Makita DTW1002Z Brushless 1/2in Impact Wrench is supplied as a Bare Unit, NO battery or charger Supplied.

PTDMAKDTW1002Z

The Makita 5008 MGAJ Circular Saw is a lightweight tool with the additional safety feature of an electric brake. It also has a magnesium die cast base, blade case and safety cover. It has an easy to read cut-depth scale with the two most frequently used numbers, 19mm (3/4in) and 13mm (1/2in) stamped in larger size. For improved visibility, the circular saw has a built-in job light using a twin LED light.

Specification

Input Power: 1,800W
No Load Speed: 5,200/min.
Blade: 210 x 30mm Bore
Max Cut: at 90: 75.5mm, at 45: 57mm, at 50: 51.5mm
Weight: 5.1kg

Makita 5008 MGAJ 210mm Circular Saw 1800 Watt 240 Volt Version.

PTDMAK5008MGJ

The Makita DCL180 LXT Vacuum Cleaner is a handy cordless cleaner with a cloth filtration system. Strong suction power and large dust capacity for heavy-duty applications. Low noise design, makes it ideal for quiet cleaning operations in job sites located in and around residential areas. Fited with a rubberised soft grip for reduced hand fatigue even in long periods of continuous use.

Bare Unit, No Battery or Charger.

Specification

Capacity: 0.65 Litres.
Max Sealed Suction: 3.6 kPa.
Max Airflow: 1.3 m/min.
Weight: 1.2kg.

The Makita DCL180Z LXT Blue Vacuum Cleaner is supplied as a Bare Unit, NO battery or charger supplied.

PTDMAKDCL180ZB

The Makita DCL180 LXT Vacuum Cleaner is a handy cordless cleaner with a cloth filtration system. Strong suction power and large dust capacity for heavy-duty applications. Low noise design, makes it ideal for quiet cleaning operations in job sites located in and around residential areas. Fited with a rubberised soft grip for reduced hand fatigue even in long periods of continuous use.

Bare Unit, No Battery or Charger.

Specification

Capacity: 0.65 Litres.
Max Sealed Suction: 3.6 kPa.
Max Airflow: 1.3 m/min.
Weight: 1.2kg.

The Makita DCL180ZW LXT White Vacuum Cleaner is supplied as a Bare Unit, NO battery or charger supplied.

PTDMAKDCL180ZW

The Makita HS7601 190mm Circular Saw is a compact and lightweight tool that has an aluminium die-cast safety cover and base plate for increased durability. The tool has been double insulated for increased user safety and an ergonomic soft grip for increased comfort.

Rear angular guide for smooth and precise adjustment of bevel angle and single action lever for quick adjustment of cutting depth. With a rear dust exhaust port, it can also be connected to a dust extractor, for a cleaner working environment.

It is also compatible with a guide rail.

Specification

Input Power: 1,200W
No Load Speed: 5,200/min.
Blade: 190mm x 30mm Bore
Depth of Cut: at 90 66mm, at 45 46mm
Weight: 4.0kg

Makita HS7601 190mm Circular Saw 1200 Watt 240 Volt Version.

PTDMAKHS7601J