Cable Reels Site Lights & Transformers

This Brennenstuhl Gripper Light is a heavy-duty inspection lamp, with a spring-loaded plastic handle that enables you to clamp the light securely. There is also a hanging hook to suspend it from a nail, screw or hook. It comes complete with a glass bulb protector and wire basket.

Specification

Cable: H05VV-F 2x0.75.
Output: 60 Watt.
Fittings: E27.
Plug: BS-plug.
Cable Length: 5m.

PTDGRPBRE1176113

The Brennenstuhl Large Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 30 Watt/2,100 Lumens.
Cable: 5 Metres, H07RNF3G1,0.

PTDGRPBRE253303

Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23 amp.

The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

PTDGRPCM10002

The Brennenstuhl Energy Station has four 16 amp sockets, ideal for multi purpose use. The casing is made of break resistant plastic, with 2 holes on either side to make it suitable for wall mounting. Slots around the body allow the cable to be wound. It has a 2 metre cable and is ideal for worksites where multiple machines need to be used at the same time.

Specification

Cable Length: 2 Metre.
Cable: H05VV-F 3G2,5.
Cable Colour: Yellow.
Nominal Current: 16 Amp.
Socket: 4 x CEE 110 Volt.

PTDBRE1151413

The Brennenstuhl 14 metre CEE Trailing Lead is made from oil-resistant rubber and is fitted with a robust plug.

It conforms to EAN 4007123081288.

Specification

Cable: H05VV-F 3G1.5 1.5mm.
Cable Colour: Yellow.
Length: 14m.
Nominal Current: 16 Ah.
Voltage: 110 Volt.

PTDBRE1166463L

The Brennenstuhl 36 Watt Low Energy Jet Light is a robust, compact and -powerful work light. It offers an even distribution of light via the ultra-efficient fluorescent tubes, making it an ideal choice for a variety of tradesmen, particularly plasterers as there is virtually no heat emitted.

It is IP44 rated, can be used in three angled positions, and has a polycarbonate shockproof casing. It also has a 3m long cable.

Specification

Lamp Efficacy: 79 lm/W.
Colour Temperature: 6400 K.
Power: 2 x 36 Watt.
Ballast Efficiency: A3.
Cable Length: 3m.
Cable Type: H05RN-F 3G1,0.
Voltage: 110 Volt.

PTDBRE1172563L

The Brennenstuhl Large Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 30 Watt/2,100 Lumens.
Cable: 5 Metres, H07RNF3G1,0.

1 x Brennenstuhl Large Cree (Chip LED) Worklight 240 Volt Version.

PTDBRE253303

The Brennenstuhl Large Cree (Chip LED) Worklight is ideal for indoor and outdoor use. It is water resistant to IP65. This light offers a mobile, high powered, COB LED light with extra wide light diffusion to illuminate a large area. It uses approximately 80% less energy than conventional light sources and offers an instant bright light.

Low heat generation, no risk of injury. Chip LEDs have an extremely long lifespan, are shockproof and maintenance free. It has a diecast aluminium casing with a stable tubular steel frame and ergonomic plastic handle. The floodlight pivots and locks in place and the front pane is made of safety glass.

Specification

Output: 30 Watt/2,100 Lumens.
Cable: 5 Metres, H07RNF3G1,0.

1 x Brennenstuhl Large Cree (Chip LED) Worklight 110 Volt Version.

PTDBRE253313

The Brennenstuhl 25 Metre AK260 Cable Reel is made of break resistant PVC with a robust, galvanised steel tube frame. It has three 13 amp sockets and a BS 1363 plug. Three self closing shutters protect the socket outlets from dust and grime when not in use. There is also thermal cut out protection to protect against overheating or overloading.

Made In Germany.

Specification

Cable Length: 25 Metre.
Cable: 05VV-F 3G1.25.
Cable Colour: Black.
Reel Diameter: 260mm.
Nominal Current: 13 Amp.
Plug: BS 1363.

PTDBREAK260

The Brennenstuhl 25 Metre AK260 Cable Reel is made of break resistant PVC with a robust, galvanised steel tube frame. It has two 16 amp sockets with self closing shutters protect the socket outlets from dust and grime when not in use. Three is also thermal cut out protection to protect against overheating or overloading.

Made In Germany.

PTDBREAK260L

The Brennenstuhl 25m Garant Cable Reel has two 16A socket outlets with self-closing covers which provides protection against dust and contamination. It has been developed for tradesmen across a wide range of industrial applications.

With thermal cut-out protection against overheating or overload. The reel body made from special plastic, fitted to a galvanised steel tube frame. With an innovative and ergonomic cable guide handle (cable pilot) for perfect cable management during winding. The handle can be used on the left/right side, increasing user flexibility.

Specification:

Cable Length: 25m
Nominal Current: 16A

PTDBRE1148773

The Brennenstuhl Professional Construction Telescopic Tripod can be used in conjunction with virtually all power-jet lights, site lights and halogen lamps up to 1000 Watt and also Chip-LED lamps. It has a heavy-duty, all steel construction with square section hinged legs and ground mounting plates. Zinc plated for increased job site durability.
It is easily adjustable up to a height of 2.5m.

Inculdes a light attachment with mounting screws.

Height Adjustable: 1-2.5m.
Load Capacity: 7kg.

PTDBRE1170610

The Brennenstuhl Rechargeable LED Spot is splash proof and IP54 rated, making it ideal for use indoors and outdoors. It is equipped with integrated overcharge and total discharge protection and has a battery charging indicator. The casing is made from die-cast Aluminium and fitted with edge protection made of a specially formulated knock resistant plastic and a stable, multi-stage, folding frame. The light casing is impact-resistant and drop-proof up to 2m.

It produces an extremely bright and even light, all the time, even in areas without an electrical connection. With 2 regulating notches: 100 % and 50 % light (safe energy). It also has a powerbank function: USB charging port for devices with USB charging cables such as smart phones, MP3 players, GPS, etc.

This light contains a built-in LED lamp, the light unit is NOT replaceable.

Charging via micro USB connection (5 V, 1 A), USB cable included.

Specification

Power: 10 Watt.
Colour Temperature: 6500 K.
Luminous Flux: 1,000 Lumens.
Runtime: High(100%): 3 Hours, Low(50%): 6 Hours.
Input Power: Rechargeable 3.7 Volt Li-Ion Battery, 4400 mAh.

PTDBRE1173080

The Brennenstuhl SMD LED Single Tripod Site Light has an adjustable head with an Aluminium casing that is IP54 rated. The light is mounted on a robust, adjustable tripod that adjusts been 0.9 and 2 meters. Fitted with a 3m oil resistant cable.

Specification

Voltage: 240.
Power: 20 Watt.
Luminous Flux: 1720 Lumens.
Height Adjustable: 0.9-2m.
Energy Efficiency Class: A+.

PTDBRE1175603

The compact Brennenstuhl IP65 Chip LED Led Worklight can be used indoors and outdoors, and is suitable for wall installation. It has an extra-wide light diffusion to illuminate a large area. Chip LEDs have an extremely long lifespan, are shock-proof and maintenance-free. With low heat generation, so there is no danger of injury. Contained within a die-cast aluminium casing that is fitted with safety glass.

Delivering an impressive 750 Lumens of light, its ideal for hobby, workshops and construction sites. Also for house entrances, garages, courtyards, halls, etc.

The adjustable mounting bracket makes it suitable for mounting on a tripod (BRE1170610), sold seperately.

Please note the light unit contains built-in LEDs, these are NOT replaceable.

Specification

Voltage: 240 Volt.
Power: 10 Watt.
Luminous Flux: 750 Lumens.
Colour Temperature: 6500 K.
Energy Efficiency Class: A+.

PTDBRE1250121