Plug Cutters & Screw Diggers
- Disston Plug Cutter Range
Plug Cutters are used for cutting wood plugs to cover recessed screw holes to achieve a neat finish. For a perfect grain match use an offcut from the timber being plugged.
To ensure an accurate fit we suggest you use the same screw digger from the Disston brand.
PTDGRPDIS5594Learn MoreDeWalt Pilot Bit & 4 Cutter Countersink Range
The DEWALT four cutter countersink provides a clean, professional finish. They are ideal for drilling pilot holes and countersinking in one action and can be used on hard and soft wood, composite board and MDF.
PTDGRPDEWDT7604QZLearn MoreDeWalt Pilot Drill Bits Range
The DEWALT Pilot Drill Bits for use with the 4 cutter countersinks. The split point tip starts drilling on contact. A flat on the shank prevents the drill bit slipping in the countersink. For use in hard and soft wood, composite board and MDF.
PTDGRPDEWDT7608QZLearn MoreFaithfull Plug Cutter Range
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes.
For best performance power drill should be held in a stand.
For a perfect grain match use an offcut from the timber being plugged.
To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand.
The set of 4 contains sizes No 6, 8, 10 and 12.
PTDGRPFAIPLUG6Learn MoreDisston Screw Digger Range
Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.
PTDGRPDIS5207Learn MoreFaithfull Screwsink Range
These Faithfull Screwsinks can be used for drilling, countersinking and counter-boring in one operation. The countersinking part can be slid up and down the drill part of the tool by means of a hexagon key to suit the depth of hole being drilled.
To ensure an accurate fit, it is suggested that the corresponding plug cutter is used from the Faithfull range.
Each screwsink is supplied with a hexagon key.
PTDGRPFAISSINK6Learn MorePlug Cutters & Screw Diggers
VAT Number: 100 5143 84